diff --git a/package.json b/package.json index e3b799b..a643035 100755 --- a/package.json +++ b/package.json @@ -92,6 +92,7 @@ "chai": "^4.1.2", "compression-webpack-plugin": "^3.1.0", "filemanager-webpack-plugin": "^3.0.0", + "lodash.template": "^4.18.0", "sass": "1.32.13", "sass-loader": "10.1.1", "ts-loader": "^8.2.0", diff --git a/src/locale/i18n/zh/mes/index.json b/src/locale/i18n/zh/mes/index.json index cd0602f..74aac44 100755 --- a/src/locale/i18n/zh/mes/index.json +++ b/src/locale/i18n/zh/mes/index.json @@ -49,13 +49,13 @@ "batchNumber": "批数", "batchSize": "批量", "export": "汇出", - "equipmentNumber": "设备编号", + "equipmentNumber": "设备编号", "materialNumber": "料件编号", "materialBatchNumber": "料件批号", "materialBatchDesc": "料件说明", - "equipment": "设备", - "equipmentDesc": "设备说明", - "equipmentNumberDesc": "设备编号说明", + "equipment": "设备", + "equipmentDesc": "设备说明", + "equipmentNumberDesc": "设备编号说明", "equipmentCategory": "设备类别", "equipmentCategoryDesc": "设备类别说明", "itemAddition": "项次新增", @@ -88,9 +88,9 @@ "testDieAmount": "测试Die数", "programNo": "编号", "dispatchQuantity": "派工数量", - "plannedCompletionTime": "计画完成时间", + "plannedCompletionTime": "计划完成时间", "enterDispatchQuantity": "请输入派工数量", - "planStartTime": "计画开始时间", + "planStartTime": "计划开始时间", "modificationSuccessful": "修改成功", "toolNumber": "工具编号", "toolCategoryDescription": "工具类别说明", @@ -183,8 +183,8 @@ "qcSubCategoriesDesc": "检验细类描述", "inspectionLevelId": "等级编号", "inspectionLevelDesc": "等级描述", - "qcPlan": "检验计画编号", - "qcPlanDesc": "检验计画说明", + "qcPlan": "检验计划编号", + "qcPlanDesc": "检验计划说明", "qcItem": "检验项目编号", "qcRole": "检验人员群组", "ncCode": "不合格代码", @@ -197,7 +197,7 @@ "inspection": "检验", "inspectionItemDescription": "检验项目说明", "samplingMethod": "抽样方式", - "inspectionPlan": "检验计画", + "inspectionPlan": "检验计划", "createNew": "新建", "inOperation": "作业中", "closed": "已关闭", @@ -299,9 +299,9 @@ "splitInvalid": "失效（分批）", "ruleState": "请选择状态", "personnel": "人员", - "planStartDate": "计画开始日期", + "planStartDate": "计划开始日期", "qtyReleased": "已下达数量", - "planEndDate": "计画结束日期", + "planEndDate": "计划结束日期", "standardNumber": "标准数", "unitQty": "单位量", "hold": "保留", diff --git a/src/locale/i18n/zh/mes/ord.json b/src/locale/i18n/zh/mes/ord.json index 3eaf7be..21f959e 100755 --- a/src/locale/i18n/zh/mes/ord.json +++ b/src/locale/i18n/zh/mes/ord.json @@ -1,86 +1,85 @@ { - "orderMaintenance": "工单维护作业", - "status": "工单状态", - "planWorkCenter": "计画工作中心", - "feedPoint": "投料点", + "orderMaintenance": "工单维护作业", + "status": "工单状态", + "planWorkCenter": "计划工作中心", + "feedPoint": "投料点", "LOTList": "LOT清单", - "substituteMaterial": "替代料", - "itemDetail": "料件明细", - "productionRoute": "工艺路线", - "ruleShopOrder": "请输入工单编号", - "ruleOrderType": "请输入工单类型", - "rulePlanWorkCenter": "请输入计画工作中心", - "rulePriority": "请输入优先顺序", - "ruleOrderStatus": "请输入工单状态", - "ruleOrderAmount": "请输入工单数量", - "ruleBOM": "请输入BOM", - "planEndDateNotEarlierStart": "计画结束日期不可早于计画开始日期", - "shopOrderView": "工单-查看", - "shopOrderAdd": "工单-新增", - "shopOrderEdit": "工单-编辑", - "confirmDelOrder": "是否确认删除工单：{shopOrder}", - "ruleSelectProductNo": "请先选择产品编号", - "confirmDelRow": "是否确认删除该行", - "feedPointNotEqualMaterial": "同一个投料点{operation}不允许有相同物料{component}", - "itemDetailSeqDuplicate": "料件明细顺序{seq}重複", - "subItemNoNotEmpty": "替代料料件编号不可为空", - "itemNoNotEqualSubs": "料件编号:{component}不可与替代料相同", - "orderTypeNotEmpty": "工单类型不可为空", - "noOrderTypeLogic": "无此工单类型『{label}』逻辑，请检查字典配置", - "releasable": "可下达", - "inTesting": "测试中", - "shopOrderRequired": "工单编号必须填写", - "ruleSelectOrderType": "请选择工单类型", - "ruleSelectOrderStatus": "请选择工单状态", - "statusNotEmpty": "状态必须填写", - "holdSign": "保留标识", - "amountRequired": "数量必须填写", - "priorityRequired": "优先顺序必须填写", - "planItem": "计画物料", - "rulePlanItem": "计画物料必须填写", - "planItemList": "计画物料清单", - "planProductionRoute": "计画工艺路线", - "prdAmount": "生产数量", - "releasableAmount": "可下达数量", - "pendingReleaseAmount": "待下达数量", - "planComDate": "计画完成日期", + "substituteMaterial": "替代料", + "itemDetail": "料件明细", + "productionRoute": "工艺路线", + "ruleShopOrder": "请输入工单编号", + "ruleOrderType": "请输入工单类型", + "rulePlanWorkCenter": "请输入计划工作中心", + "rulePriority": "请输入优先顺序", + "ruleOrderStatus": "请输入工单状态", + "ruleOrderAmount": "请输入工单数量", + "ruleBOM": "请输入BOM", + "planEndDateNotEarlierStart": "计划结束日期不可早于计划开始日期", + "shopOrderView": "工单-查看", + "shopOrderAdd": "工单-新增", + "shopOrderEdit": "工单-编辑", + "confirmDelOrder": "是否确认删除工单：{shopOrder}", + "ruleSelectProductNo": "请先选择产品编号", + "confirmDelRow": "是否确认删除该行", + "feedPointNotEqualMaterial": "同一个投料点{operation}不允许有相同物料{component}", + "itemDetailSeqDuplicate": "料件明细顺序{seq}重複", + "subItemNoNotEmpty": "替代料料件编号不可为空", + "itemNoNotEqualSubs": "料件编号:{component}不可与替代料相同", + "orderTypeNotEmpty": "工单类型不可为空", + "noOrderTypeLogic": "无此工单类型『{label}』逻辑，请检查字典配置", + "releasable": "可下达", + "inTesting": "测试中", + "shopOrderRequired": "工单编号必须填写", + "ruleSelectOrderType": "请选择工单类型", + "ruleSelectOrderStatus": "请选择工单状态", + "statusNotEmpty": "状态必须填写", + "holdSign": "保留标识", + "amountRequired": "数量必须填写", + "priorityRequired": "优先顺序必须填写", + "planItem": "计划物料", + "rulePlanItem": "计划物料必须填写", + "planItemList": "计划物料清单", + "planProductionRoute": "计划工艺路线", + "prdAmount": "生产数量", + "releasableAmount": "可下达数量", + "pendingReleaseAmount": "待下达数量", + "planComDate": "计划完成日期", "firstLastBatch": "第一个/最后一个生产批", - "selectHotLot": "请选择Hot Lot", - "releaseAmount": "下达数量", - "batchRelease": "批次下达", - "releaseSuccess": "下达成功", - "printProcessCard": "列印流程卡", - "ruleLineSideHouse": "请输入线边仓", - "inputReleaseAmount": "请输入下达数量", + "selectHotLot": "请选择Hot Lot", + "releaseAmount": "下达数量", + "batchRelease": "批次下达", + "releaseSuccess": "下达成功", + "printProcessCard": "列印流程卡", + "ruleLineSideHouse": "请输入线边仓", + "inputReleaseAmount": "请输入下达数量", "selectRowPrint": "选中一行LOT NO进行列印", - "inputPrdRouter": "请输入生产途程", + "inputPrdRouter": "请输入生产途程", "prdBatch": "生产批", - "searchNotAllEmpty": "检索条件不能全部为空", - "ruleRevisionProduct": "版本不为空时，产品编号不能为空", - "ruleProductRevision": "产品编号不为空时，版本不能为空", - "searchNoData": "查无资料", + "searchNotAllEmpty": "检索条件不能全部为空", + "ruleRevisionProduct": "版本不为空时，产品编号不能为空", + "ruleProductRevision": "产品编号不为空时，版本不能为空", + "searchNoData": "查无资料", "selectRowPrint2": "选中一行LOT NO进行补印", "selectOnceARowPrint": "一次只可选中一行LOT NO进行补印", - "userBatch": "客户批次", - "ruleUserPart": "请输入客户料号", - "ruleQty": "请输入片数", + "userBatch": "客户批次", + "ruleUserPart": "请输入客户料号", + "ruleQty": "请输入片数", "confirmDelLOTMessage": "是否确认删除该LOT资讯?", - "qtyRequired": "片数必须填写", - "releasedQty": "已下达片数", - "dieAmount": "Die数量", - "dieAmountRequired": "Die数量必须填写", - "releasedDie": "已下达Die数", - "orderQty": "工单片数", - "releaseQty": "下达片数", - "orderStatusNotReleasable": "工单状态不是可下达", - "unSelectWaferCannotRelease": "未选择wafer不能下达！", - "eachPartUserLotCorrespond": "每片客户批号需要一致", - "selectReleasedQtyPartNo": "请选择要下达的片号", - "releaseDie": "下达Die数", - "eachDieUserLotCorrespond": "每Die客户批号需要一致", - "releaseDieNotOverDieAmount": "下达Die数不能超过Die数", - "releasableDie": "可下达Die数", - "orderDie": "工单Die数", - "printLabel": "列印标籤" + "qtyRequired": "片数必须填写", + "releasedQty": "已下达片数", + "dieAmount": "Die数量", + "dieAmountRequired": "Die数量必须填写", + "releasedDie": "已下达Die数", + "orderQty": "工单片数", + "releaseQty": "下达片数", + "orderStatusNotReleasable": "工单状态不是可下达", + "unSelectWaferCannotRelease": "未选择wafer不能下达！", + "eachPartUserLotCorrespond": "每片客户批号需要一致", + "selectReleasedQtyPartNo": "请选择要下达的片号", + "releaseDie": "下达Die数", + "eachDieUserLotCorrespond": "每Die客户批号需要一致", + "releaseDieNotOverDieAmount": "下达Die数不能超过Die数", + "releasableDie": "可下达Die数", + "orderDie": "工单Die数", + "printLabel": "列印标籤" } - diff --git a/src/locale/i18n/zh/mes/pms.json b/src/locale/i18n/zh/mes/pms.json index ee07df7..b7190c7 100755 --- a/src/locale/i18n/zh/mes/pms.json +++ b/src/locale/i18n/zh/mes/pms.json @@ -62,9 +62,9 @@ "manufacturer": "製造商", "resrceMaintainView": "设备维护-查看", "resrceMaintainEdit": "设备维护-编辑", - "confirmAutoStop": "设备群组已异动，下述保养计画会自动停止，是否确定?", - "oriEquipGroupMaList": "原群组保养计画： {oriEquipGroupMaList}", - "equipGroupMaList": "新群组保养计画： {equipGroupMaList}", + "confirmAutoStop": "设备群组已异动，下述保养计划会自动停止，是否确定?", + "oriEquipGroupMaList": "原群组保养计划： {oriEquipGroupMaList}", + "equipGroupMaList": "新群组保养计划： {equipGroupMaList}", "confirmDelSerial": "是否确认删除序号: {seq}", "fileTypeNotSuit": "所选择的档案类型与当前附件类型不符", "inspShopOrder": "点检工单编号: {id}", @@ -74,11 +74,11 @@ "workLog": "工作记录", "InspectionComp": "点检完成", "labelInspShopOrder": "点检工单编号", - "inspPlanName": "点检计画名称", + "inspPlanName": "点检计划名称", "statusAuth": "状态(许可权)", "typeNo": "类型编号", "user": "用户", - "planEndDate": "计画结束时间", + "planEndDate": "计划结束时间", "compDate": "完成时间", "inspResult": "点检结果", "inspOrder": "点检工单", @@ -93,8 +93,8 @@ "workGroup": "工作群组", "indicatedGroup": "指定群组", "inspOrderNo": "点检工单号", - "planEndNotEarlierStart": "『计画开始日期』结束日期不可早于开始日期", - "planEndNotEarlierStart2": "『计画结束日期』结束日期不可早于开始日期", + "planEndNotEarlierStart": "『计划开始日期』结束日期不可早于开始日期", + "planEndNotEarlierStart2": "『计划结束日期』结束日期不可早于开始日期", "result": "结果 *", "workRecordAdd": "工作记录-新增", "ruleStartTime": "请输入开始时间", @@ -106,7 +106,7 @@ "mobile": "手机号码", "inspListName": "点检表名称", "selectDateTime": "选择日期时间", - "executePlan": "执行计画", + "executePlan": "执行计划", "resrceList": "设备清单", "resrceTypeGroupName": "设备类群组名称", "inspListTypeName": "点检表类别名称", @@ -115,16 +115,16 @@ "eqpNotEmpty": "{equipName}频率不可为空", "valueTypeNotEmpty": "数值型别不可为空", "startTimeLaterCurrent": "开始时间不正确，必须大于当前时间", - "overTwoYearFixAgain": "此计画超过两年，请重新调整时间", - "confirmRunPlan": "确定要启用选择的计画: {schName}？", + "overTwoYearFixAgain": "此计划超过两年，请重新调整时间", + "confirmRunPlan": "确定要启用选择的计划: {schName}？", "enableSuccess": "启用成功", - "confirmStopPlan": "确定要停用选择的计画: {schName}？", + "confirmStopPlan": "确定要停用选择的计划: {schName}？", "disableSuccess": "停用成功", - "dailyPlan": "日计画", - "weeklyPlan": "周计画", - "monthlyPlan": "月计画", - "annualPlan": "年计画", - "annualPlan2": "年度计画", + "dailyPlan": "日计划", + "weeklyPlan": "周计划", + "monthlyPlan": "月计划", + "annualPlan": "年计划", + "annualPlan2": "年度计划", "perDay": "每隔_日", "perHour": "每隔_小时", "valueType": "数值型别", @@ -167,7 +167,7 @@ "startTimeNotEmpty": "开始时间不可为空", "endTimeNotEmpty": "结束时间不可为空", "maintenanceOrderNo": "保养工单编号", - "maintenancePlanName": "保养计画名称", + "maintenancePlanName": "保养计划名称", "maintenanceStart": "保养开始", "machineReasonCode": "机时原因代码", "keyNotEmpty": "{key}不可为空", @@ -180,7 +180,7 @@ "confirmVoidMaintain": "是否确认作废保养工单: {id}", "maintainLowestHourLimit": "保养最低时限(时)", "maintainWorkGroup": "保养工作群组", - "ruleMaintenancePlanName": "请输入保养计画名称", + "ruleMaintenancePlanName": "请输入保养计划名称", "inputFrequecy": "请输入频率", "everyFewDays": "每几日", "everyFewHours": "每几小时", @@ -189,7 +189,7 @@ "inExecute": "执行中", "audit": "稽核", "end": "结束", - "maintainExecuteTime": "保养计画执行时间", + "maintainExecuteTime": "保养计划执行时间", "maintenanceOrder": "保养工单", "machineReasonCodeNotEmpty": "机时原因代码不可为空", "inputValue": "输入值", @@ -202,7 +202,7 @@ "inputResult": "请输入结果", "inputMemo": "请输入备注", "inputMachineReason": "请输入机时原因代码", - "planEndTimeNotEarlier": "计画结束时间不可早于计画开始时间", + "planEndTimeNotEarlier": "计划结束时间不可早于计划开始时间", "maintainEqp": "保养设备", "actualSpare": "实际使用备品", "ruleSpare": "请输入备品", @@ -218,8 +218,8 @@ "mainOrderHistory": "保养工单历史纪录", "historyRecord": "历史纪录", "finisher": "完成人员", - "planTimeStart": "计画时间起", - "planTimeEnd": "计画时间讫", + "planTimeStart": "计划时间起", + "planTimeEnd": "计划时间讫", "groupType": "群组种类", "groupDesc": "群组说明", "fullName": "全名", @@ -233,13 +233,13 @@ "maintainPeriod": "保养週期", "enable3": "启", "disable2": "停", - "confirmSelectPlan": "确定要{msg}用选择的计画: {schName}", - "maintainPlanView": "保养计画-查看", - "maintainPlanEdit": "保养计画-编辑", - "confirmDelMaintainPlan": "是否确定删除保养计画: {schName}", - "maintainPlanAdd": "保养计画-新增", + "confirmSelectPlan": "确定要{msg}用选择的计划: {schName}", + "maintainPlanView": "保养计划-查看", + "maintainPlanEdit": "保养计划-编辑", + "confirmDelMaintainPlan": "是否确定删除保养计划: {schName}", + "maintainPlanAdd": "保养计划-新增", "confirmDelEqpNo": "是否确认删除设备编号: {equipName}", - "maintainPlanMethod": "保养计画方式", + "maintainPlanMethod": "保养计划方式", "regularly": "定期", "onSchedule": "定时", "maintainWorkTime": "保养工时(时)", @@ -247,8 +247,8 @@ "startTimeFormatWrong": "开始时间格式错误", "endTimeFormatWrong": "结束时间格式错误", "ruleStartEnd": "开始时间不可大于结束时间", - "seasonPlan": "季度计画", - "halfYearPlan": "半年度计画", + "seasonPlan": "季度计划", + "halfYearPlan": "半年度计划", "patrolOrderAdd": "巡检工单-新增", "patrolStart": "巡检开始", "inputPatrolListNo": "请输入巡检表编号", @@ -390,4 +390,4 @@ "vvalidEndDate": "有效结束日期", "proof": "证明", "inputProof": "请输入证明" -} \ No newline at end of file +} diff --git a/src/locale/i18n/zh/mes/prd.json b/src/locale/i18n/zh/mes/prd.json index 877d5e1..1b651bf 100755 --- a/src/locale/i18n/zh/mes/prd.json +++ b/src/locale/i18n/zh/mes/prd.json @@ -1,487 +1,487 @@ { - "BOMNo": "BOM编号", - "currentRevision": "目前版本", - "unitConsume": "单位耗用量", - "unitPrdAmount": "单位生产数", - "confirmDelItemList": "是否确认删除物料清单{bom}/{bomType}/{revision}", - "itemOperationDuplicate": "料件编号:{component} 投料点:{operation}重複", - "BOMMaintainItemDetail": "BOM必须维护料件明细", - "item": "料件", - "itemTypeDesc": "料件类别说明", - "selectWorkGroup": "请选择班组", - "selectUserWorkShiftNo": "请选择班製编号", - "nextMonth": "下月份", - "nextYear": "下年度", - "cannotModifyPastCalendars": "不可修改当日(包含当日)之前的班组日历", - "confirmCoverageWorkGroupCalendarInfo": "当前班组在{rangeText}已经有设定值，是否进行复盖", - "userWorkShift": "班製", - "userWorkShiftNo": "班製编号", - "userWorkShiftDesc": "班製说明", - "userWorkShiftNoExist": "班製编号: {userWorkShift}已存在", - "confirmDelUserWorkShift": "是否确认删除班製: {userWorkShift}", - "workPosition": "职级", - "workGroup": "班组编号", - "workGroupDesc": "班组说明", - "workGroupUser": "班组人员", - "workGroupType": "班组类型", - "workGroupTypeNo": "班组类型编号", - "workGroupTypeDesc": "班组类型说明", - "enterWorkGroupTypeNo": "请输入班组类型编号", - "confirmDelWorkGroupType": "是否确认删除班组类型: {workGroupType}", - "shippingLocation": "出货地点", - "shippingPlace": "出货地", - "country": "国家", - "address": "地址", - "user": "客户", - "userNoRequired": "客户编号不可为空", - "userNoExist": "客户编号: {customerNo}已存在", - "confirmDelUser": "是否确认删除客户: {customerNo}", - "inspLevel": "检验等级", - "confirmSelectInspPlanDel": "请选择要删除的检验计画", - "confirmSelectSupplierDel": "请选择要删除的供应商", - "itemMaterialMaintain": "料件维护", - "inspLevelNotSetMultiple": "检验等级『{str}』不可设定多个检验计画", - "confirmDelItemMaterialNo": "是否确认删除料件编号: {item}", - "contactPerson": "联络人", - "itemTypeExist": "料件类别: {typeNo}已存在", - "confirmDelItemType": "是否确认删除料件类别: {typeNo}", - "actionTiming": "作用时机", - "ruleLogic": "法则逻辑", - "rule": "法则", - "dispose": "处置", - "variable": "变数", - "operator": "运算子", - "checkValue": "判断值", - "startOp": "开始工序", - "exitOpTime": "出站时间", - "endOp": "结束工序", - "messaeRouter": "讯息 / 路径", - "controlRuleConfig": "管制法则配置", - "ruleLogicSetting": "法则逻辑设定", - "confirmRuleNoDel": "法则编号{ruleNo},是否确认删除", - "confirmRuleDel": "法则{rule},是否确认删除", - "confirmInOrderDuplicate": "顺序{seq}重複, 请确认", - "startOpIndicateTime": "开始工序的指定时间", - "endOpIndicateTime": "结束工序的指定时间", - "msgNotEmpty": "讯息不可为空", - "alarmCodeNotEmpty": "报警编号不可为空", - "routerNotEmpty": "路径不可为空", - "startOpEndOpDataNotEqual": "开始工序与结束工序所设定的资料不可完全相同", - "segmentNo": "工段编号", - "eventNo": "事件编号", - "eventName": "事件名称", - "eventDesc": "事件说明", - "severity": "严重度", - "duty": "责任", - "nonConformingGroup": "不合格群组", - "usableNonConformingGroup": "可用不合格群组", - "indicatedNonConformingGroup": "已指派不合格群组", - "selfDuty": "自责", - "otherDuty": "他责", - "nonConformanceCodeExist": "不合格代码: {ncCode}已存在", - "confirmDelNonComformingCode": "是否确认删除不合格代码: {ncCode}", - "usableNonConformingCode": "可用不合格代码", - "indicatedNonConformingCode": "已指派不合格代码", - "operationConfig": "工序配置", - "nonConformanceGroupExist": "不合格群组: {ncGroup}已存在", - "confirmDelNCGroup": "是否确认删除不合格群组: {ncGroup}", - "operationType": "工序类型", - "usableResrce": "可用设备", - "indicatedResrce": "已指派设备", - "usableItemType": "可用料件类别", - "indicatedItemType": "已指派料件类别", - "operationDataField": "工序主资料", - "confirmDelOperation": "是否确认删除ID为{operation}", - "operationExist": "工序: {operation}已存在", - "paramType": "参数类型", - "default": "默认", - "dataType": "型别", - "dataListSrc": "资料表来源", - "textSrc": "栏位来源", - "textDescSrc": "栏位说明来源", - "otherRequirement": "其他条件", - "dataList": "资料表", - "paramDataFields": "参数主资料", - "confirmDelParamNo": "是否确认删除参数编号: {parameterNo}", - "paramNoExist": "参数编号: {parameterNo}已存在", - "PDCNo": "PDC编号", - "PDCDataFields": "PDC主资料", - "confirmDelPDCNo": "是否确认删除PDC编号: {pdcNo}", - "selectParamForDel": "请选择要删除的参数", - "approve": "批准", - "release": "解签", - "approved": "已核准", - "notApproved": "未核准", - "operationForSegment": "工段对应的工序", - "inputKeywordForFilter": "输入关键字进行过滤", - "infoConfigForOperation": "工序相关资讯配置", - "operationDesc": "作业说明", - "controlRule": "管制法则", - "mapOffset": "Map偏移量", - "paramValue": "参数值", - "controlRuleNo": "管制法则编号", - "resrceAndFormula": "设备类别『{typeNo}』及主配方『{testProgramNo}』", - "toolCategoryAndType": "工具大类『{categoryNo}』,工具类别『{typeNo}』", - "notSetDuplicate": "不可重複设定", - "selectLimitResrce": "挑选限制的设备", - "selectSpareFormula": "挑选备用配方", - "doSearchFirst": "请先执行检索", - "itemRevisionApproveNotDel": "『{item}』、『{revision}』已核准,不得删除工段或工序", - "segmentNoOrOpeartionNo": "必须选择工段编号或工序编号", - "confirmDelOperation2": "是否确认删除工序: {treeOperation}", - "itemRevisionNotApproveByOperationNotSet": "{item} 、{revision}未设定工序,不得批准", - "itemRevisionNotApproveByMsgNotSet": "{item} 、{revision}未设定主要讯息,不得批准", - "confirmApprovePrdConfig": "是否核准『{item}』、『{revision}』的产品配置", - "approveSuccess": "核准成功", - "confirmDismissApproval": "是否确定对『{item}』、『{revision}』解除批准?", - "dismissSuccess": "解签成功", - "itemRevisionApprovedNotDel": "『{item}』、『{revision}』已核准,不得删除", - "confirmDelPrdConfig": "是否确认删除『{item}』、『{revision}』的产品配置", - "limitResrce": "限制设备", - "sourceMaterialNo": "来源料件编号", - "targetMaterialNo": "目标料件编号", - "targetRevision": "目标版本", - "targetExistApprovedNotCopy": "目标料件编号{newItem},版本{newRevision}已存在产品配置作业且状态为已核准,不可执行複製", - "confirmItemPrdParamConfigCover": "目标料件有配置产品生产参数,是否复盖?", - "copyComp": "複製完成", - "selectCategory": "请选择大类", - "selectType": "请选择类别", - "limitType": "限制类型", - "seqLimitedResrceNotEmpty": "序号{seq}的限制设备不可为空", - "formulaDesc": "配方说明", - "spareFormula": "备用配方", - "standardBatchAmount": "标准批量", - "orderSeq": "顺序「{el.seq}」", - "xYNotDuplicate": "X与Y不可重複", - "percent": "百分比", - "string": "字串", - "PDCDesc": "PDC说明", - "specCenter": "规格中心", - "prdConfigPDCParam": "产品配置作业-PDC参数", - "PDCPageSeqResrceNotEmpty": "PDC页签中，序号{seq}的设备类别不可为空", - "PDCPageSeqPDCNoNotEmpty": "PDC页签中，序号{seq}的PDC编号不可为空", - "PDCPageResrceTypeNotDuplicate": "PDC页签设备类别「{typeNo}」不可重複", - "paramNoMsg": "参数编号「{parameterNo}」", - "paramNoRule": "参数编号「{parameterNo}」不符合规格上限>规格下限", - "specificationCannotBeEmpty": "规格不可为空", - "RecipeNo": "Recipe编号", - "RecipeDesc": "Recipe说明", - "RecipeReversion": "Recipe版本", - "prdConfigRecipeParam": "产品配置作业-Recipe参数", - "pageRECIPESeqResrceTypeNotEmpty": "配方页签中，序号{seq}的设备类别不可为空", - "pageRECIPESeqRecipeNoNotEmpty": "配方页签中，序号{seq}的Recipe编号不可为空", - "pageRECIPESeqRecipeNoParamNotEmpty": "配方页签中，序号{seq}的Recipe编号的参数值不可为空", - "pageRECIPESeqRecipeNoHighLimitNotEmpty": "配方页签中，序号{seq}的Recipe编号的规格上限不可为空", - "pageRECIPESeqRecipeNoLowLimitNotEmpty": "配方页签中，序号{seq}的Recipe编号的规格下限不可为空", - "pageRECIPESeqRecipeNoSpecCenterNotEmpty": "配方页签中，序号{seq}的Recipe编号的规格中心不可为空", - "pageRECIPEResrceTypeNotDupilcate": "配方页签中设备类别「{typeNo}」不可重複", - "confirmDelReasonCode": "是否确认删除原因代码： {reasonCode}", - "paramNoDesc": "参数编号说明", - "selectParamNoForDel": "请选择要删除的参数编号", - "RecipeDataConfig": "Recipe主资料配置", - "RecipeDataFields": "Recipe主资料", - "paramItemNotEmpty": "参数清单不可为空", - "confirmDelRecipeNo": "是否确认删除Recipe编号: {recipeNo}", - "copySuccess": "複製成功", - "confirmSegmentChangedDelRouter": "工段已变更，已绘製的途程将删除，是否确定？", - "confirmDelRouter": "是否确认删除途程: {router}/{revision}", - "segmentDataFields": "工段主资料", - "orderShouldPositiveInt": "顺序应为正整数", - "segmentExist": "工段: {segmentNo}已存在", - "confirmDelSegment": "是否确认删除工段: {segmentNo}", - "confirmDelSupplierNo": "是否确定删除供应商编号{supplierNo}", - "phone": "电话", - "routerDraw": "途程-绘製", - "batchRule": "併批规则", - "specialUserBatchNo": "特批客户批号", - "setter": "设定人", - "batchRuleOrderCustom": "併批规则-工单自订", - "selectDelRow": "请先选择要删除的行", - "confirmSeqRemove": "序号{selectedSeqs}，确定要移除该笔资料吗?", - "seqInputSettingValueNRequired": "序号{missingValues}必须输入设定值(N)", - "uncheckCustomDataField": "未勾选相同工单自订的资料栏位", - "seqUserBatchNotEmpty": "序号{emptyLots}的客户批号不可为空", - "seqUserLotDuplicate": "序号{duplicateSeq}，客户批号重複", - "confirmNotSaveChange": "资料已异动且尚未保存，确定要取消此次异动吗?", - "equalPO": "同 PO", - "equalDateCode": "同 DateCode", - "differentPrdBatchNotOverN": "DateCode 不相同的生产批不超过(N)个", - "differenceNotOverWeekN": "DateCode 的差距不超过(N)周", - "equalUserLot": "同客户批号", - "differentUserLotNotOverN": "客户批号不相同的生产批不超过(N)个", - "equalTestingProgramRevision": "相同测试程式与版次", - "sameOrderCcstom": "相同工单自订", - "valid": "有效", - "EQURuleNo": "EQC规则编号", - "sampleRuleNo": "抽样规则编号", - "maxNumber": "最大几个", - "BINNo": "BIN编号", - "indicateBIN": "指定BIN", - "indicateCAT": "指定CAT", - "electricTestingRule": "电性抽测规则", - "confirmDelRuleNo": "是否确认删除{eqcRuleNo}", - "checkBIN": "请勾选BIN", - "sampleMethodMaxBINNotEmpty": "抽样方式为最大N个BIN时，最大几个不能为空", - "selectOneRow": "请先选择一行", - "allGoodCatNumber": "所有Good CAT数", - "indicateSingleCAT": "指定单一CAT", - "indicateMultipleCAT": "指定多个CAT", - "maximumSingleCAT": "最大一个CAT", - "maximumNCAT": "最大N个CAT", - "indicateRepleMultipleCAT": "指定多个CAT顺序补足", - "others": "其他", - "sampleType": "抽样类型", - "FTAutoSplitRule": "FT自动分批规则", - "splitRule": "分批规则", - "transferMethod": "转移方式", - "batchNo": "批号", - "keepOrigin": "沿用原始", - "prdNewNo": "产生新号", - "inputDirect": "直接输入", - "add": "加上", - "subtract": "减去", - "code": "码+", - "applyBIN": "套用BIN", - "applyCAT": "套用CAT", - "selectRouterNo": "请先选择途程编号", - "FTSplichRule": "FT分批规则", - "confirmDelItemSeq": "是否确认删除项次为{seq}", - "transferMethod2": "移转方式", - "itemNoChangeLogicNewNotEmpty": "产品编号变更逻辑为产生新号，料件编号不可为空", - "userPartChangeLogic": "客户料号变更逻辑为产生新号，客户料号不可为空", - "userLotChangeLogic": "客户批号变更逻辑为产生新号，请选择变更方式", - "inputFieldsNotEmpty": "直接输入输入值栏位不可为空", - "addingFieldNotEmpty": "加入输入值栏位不可为空", - "haltCodeOrInputFieldsNotEmpty": "保留码数或输入值栏位不可为空", - "haltCodePositiveInt": "保留码数必需为正整数", - "subtractCodeOrInputNotEmpty": "减去码数或输入值栏位不可为空", - "subtractCodePositiveInt": "减去码数必需为正整数", - "itemNoPositiveInt": "项次必需为正整数", - "leastCheckOneBIN": "至少勾选一个BIN", - "itemNotDuplicate": "项次不可重複", - "productCodeNotEmpty": "产品编号不能为空", - "splitNoRule": "分批编号规则", - "singleTest": "单次测试数", - "singleTestSecond": "单次测试秒数", - "singleTestPositiveInt": "单次测试数数应为正整数", - "ruleSingleTestSecond": "单次测试秒仅可输入大于0的数值，小数点允许2位", - "seqBINNoNotEmpty": "序号{seq}，BIN编号不可为空", - "seqResultNotEmpty": "序号{seq}，结果不可为空", - "CPTestProgram": "CP测试程式", - "FTTestProgram": "FT测试程式", - "insertNewItem": "插入新项", - "removeAll": "移除全部", - "fieldLabel": "栏位标籤", - "mandatory": "必须", - "enterCategory": "请输入类别", - "cannotRemoveDisabledRow": "不能移除已禁用行", - "noItemsToRemove": "没有要移除的项", - "confirmDeleteCustomData": "是否确认删除自订资料 {tableName}", - "numberType": "编号类型", - "orderType": "订单类型", - "definitionMethod": "定义方式", - "defineByContainer": "按容器定义", - "skipSequence": "跳过序列", - "prefix": "首码", - "suffix": "尾码", - "baseNumber": "基数", - "sequenceLength": "序列长度", - "maximumSequence": "最大序列", - "minimumSequence": "最小序列", - "increment": "增量", - "currentSequence": "当前序列", - "resetSequenceNumber": "重置序号", - "commitImmediately": "立即提交", - "numberingRuleExample": "编号规则示例", - "enterOrSelectNumberType": "请输入或选择编号类型", - "enterBaseNumber": "请输入基数", - "maxLength128Characters": "最大长度为128字元", - "enterCurrentSequence": "请输入当前序列", - "materialGroup": "物料组", - "noData": "没有资料", - "searchBeforeDeleting": "请先检索之后再删除", - "never": "从不", - "always": "总是", - "daily": "每天", - "weekly": "每週", - "monthly": "每月", - "yearly": "每年", - "weeklySunday": "每週 - 星期日", - "weeklyMonday": "每週 - 星期一", - "weeklyTuesday": "每週 - 星期二", - "weeklyWednesday": "每週 - 星期三", - "weeklyThursday": "每週 - 星期四", - "weeklyFriday": "每週 - 星期五", - "weeklySaturday": "每週 - 星期六", - "carrierTypeDesc": "载具类型说明", - "enterCarrierType": "请输入载具类型", - "pleaseEnterContainerType": "请输入容器类型", - "enterCarrier": "请输入载具编号", - "layoutColumns": "栏数", - "layoutRows": "列数", - "layoutCapacity": "最大容量", - "layoutMapping": "载具位置图", - "layoutType": "载具位置类型", - "containerType0": "不需要位置", - "containerType1": "单栏排列", - "containerType2": "矩阵排列", - "mappingNo": "位置编码", - "carrierTypeExist": "载具类型: {carrierType}已存在", - "carrierExist": "载具编号: {carrier}已存在", - "confirmDelCarrierType": "是否确认删除载具类型: {carrierType}", - "confirmDelCarrier": "是否确认删除载具编号: {carrier}", - "carrierMemberActive": "载具作业", - "carrierBind": "绑定", - "carrierUnBind": "解绑", - "operationType2": "操作类型", - "carrierNumber": "载具数量", - "carrierTypeBo": "载具类型BO", - "status1": "使用中", - "status2": "闲置", - "automaticGeneration": "自动生成", + "BOMNo": "BOM编号", + "currentRevision": "目前版本", + "unitConsume": "单位耗用量", + "unitPrdAmount": "单位生产数", + "confirmDelItemList": "是否确认删除物料清单{bom}/{bomType}/{revision}", + "itemOperationDuplicate": "料件编号:{component} 投料点:{operation}重複", + "BOMMaintainItemDetail": "BOM必须维护料件明细", + "item": "料件", + "itemTypeDesc": "料件类别说明", + "selectWorkGroup": "请选择班组", + "selectUserWorkShiftNo": "请选择班製编号", + "nextMonth": "下月份", + "nextYear": "下年度", + "cannotModifyPastCalendars": "不可修改当日(包含当日)之前的班组日历", + "confirmCoverageWorkGroupCalendarInfo": "当前班组在{rangeText}已经有设定值，是否进行复盖", + "userWorkShift": "班製", + "userWorkShiftNo": "班製编号", + "userWorkShiftDesc": "班製说明", + "userWorkShiftNoExist": "班製编号: {userWorkShift}已存在", + "confirmDelUserWorkShift": "是否确认删除班製: {userWorkShift}", + "workPosition": "职级", + "workGroup": "班组编号", + "workGroupDesc": "班组说明", + "workGroupUser": "班组人员", + "workGroupType": "班组类型", + "workGroupTypeNo": "班组类型编号", + "workGroupTypeDesc": "班组类型说明", + "enterWorkGroupTypeNo": "请输入班组类型编号", + "confirmDelWorkGroupType": "是否确认删除班组类型: {workGroupType}", + "shippingLocation": "出货地点", + "shippingPlace": "出货地", + "country": "国家", + "address": "地址", + "user": "客户", + "userNoRequired": "客户编号不可为空", + "userNoExist": "客户编号: {customerNo}已存在", + "confirmDelUser": "是否确认删除客户: {customerNo}", + "inspLevel": "检验等级", + "confirmSelectInspPlanDel": "请选择要删除的检验计划", + "confirmSelectSupplierDel": "请选择要删除的供应商", + "itemMaterialMaintain": "料件维护", + "inspLevelNotSetMultiple": "检验等级『{str}』不可设定多个检验计划", + "confirmDelItemMaterialNo": "是否确认删除料件编号: {item}", + "contactPerson": "联络人", + "itemTypeExist": "料件类别: {typeNo}已存在", + "confirmDelItemType": "是否确认删除料件类别: {typeNo}", + "actionTiming": "作用时机", + "ruleLogic": "法则逻辑", + "rule": "法则", + "dispose": "处置", + "variable": "变数", + "operator": "运算子", + "checkValue": "判断值", + "startOp": "开始工序", + "exitOpTime": "出站时间", + "endOp": "结束工序", + "messaeRouter": "讯息 / 路径", + "controlRuleConfig": "管制法则配置", + "ruleLogicSetting": "法则逻辑设定", + "confirmRuleNoDel": "法则编号{ruleNo},是否确认删除", + "confirmRuleDel": "法则{rule},是否确认删除", + "confirmInOrderDuplicate": "顺序{seq}重複, 请确认", + "startOpIndicateTime": "开始工序的指定时间", + "endOpIndicateTime": "结束工序的指定时间", + "msgNotEmpty": "讯息不可为空", + "alarmCodeNotEmpty": "报警编号不可为空", + "routerNotEmpty": "路径不可为空", + "startOpEndOpDataNotEqual": "开始工序与结束工序所设定的资料不可完全相同", + "segmentNo": "工段编号", + "eventNo": "事件编号", + "eventName": "事件名称", + "eventDesc": "事件说明", + "severity": "严重度", + "duty": "责任", + "nonConformingGroup": "不合格群组", + "usableNonConformingGroup": "可用不合格群组", + "indicatedNonConformingGroup": "已指派不合格群组", + "selfDuty": "自责", + "otherDuty": "他责", + "nonConformanceCodeExist": "不合格代码: {ncCode}已存在", + "confirmDelNonComformingCode": "是否确认删除不合格代码: {ncCode}", + "usableNonConformingCode": "可用不合格代码", + "indicatedNonConformingCode": "已指派不合格代码", + "operationConfig": "工序配置", + "nonConformanceGroupExist": "不合格群组: {ncGroup}已存在", + "confirmDelNCGroup": "是否确认删除不合格群组: {ncGroup}", + "operationType": "工序类型", + "usableResrce": "可用设备", + "indicatedResrce": "已指派设备", + "usableItemType": "可用料件类别", + "indicatedItemType": "已指派料件类别", + "operationDataField": "工序主资料", + "confirmDelOperation": "是否确认删除ID为{operation}", + "operationExist": "工序: {operation}已存在", + "paramType": "参数类型", + "default": "默认", + "dataType": "型别", + "dataListSrc": "资料表来源", + "textSrc": "栏位来源", + "textDescSrc": "栏位说明来源", + "otherRequirement": "其他条件", + "dataList": "资料表", + "paramDataFields": "参数主资料", + "confirmDelParamNo": "是否确认删除参数编号: {parameterNo}", + "paramNoExist": "参数编号: {parameterNo}已存在", + "PDCNo": "PDC编号", + "PDCDataFields": "PDC主资料", + "confirmDelPDCNo": "是否确认删除PDC编号: {pdcNo}", + "selectParamForDel": "请选择要删除的参数", + "approve": "批准", + "release": "解签", + "approved": "已核准", + "notApproved": "未核准", + "operationForSegment": "工段对应的工序", + "inputKeywordForFilter": "输入关键字进行过滤", + "infoConfigForOperation": "工序相关资讯配置", + "operationDesc": "作业说明", + "controlRule": "管制法则", + "mapOffset": "Map偏移量", + "paramValue": "参数值", + "controlRuleNo": "管制法则编号", + "resrceAndFormula": "设备类别『{typeNo}』及主配方『{testProgramNo}』", + "toolCategoryAndType": "工具大类『{categoryNo}』,工具类别『{typeNo}』", + "notSetDuplicate": "不可重複设定", + "selectLimitResrce": "挑选限制的设备", + "selectSpareFormula": "挑选备用配方", + "doSearchFirst": "请先执行检索", + "itemRevisionApproveNotDel": "『{item}』、『{revision}』已核准,不得删除工段或工序", + "segmentNoOrOpeartionNo": "必须选择工段编号或工序编号", + "confirmDelOperation2": "是否确认删除工序: {treeOperation}", + "itemRevisionNotApproveByOperationNotSet": "{item} 、{revision}未设定工序,不得批准", + "itemRevisionNotApproveByMsgNotSet": "{item} 、{revision}未设定主要讯息,不得批准", + "confirmApprovePrdConfig": "是否核准『{item}』、『{revision}』的产品配置", + "approveSuccess": "核准成功", + "confirmDismissApproval": "是否确定对『{item}』、『{revision}』解除批准?", + "dismissSuccess": "解签成功", + "itemRevisionApprovedNotDel": "『{item}』、『{revision}』已核准,不得删除", + "confirmDelPrdConfig": "是否确认删除『{item}』、『{revision}』的产品配置", + "limitResrce": "限制设备", + "sourceMaterialNo": "来源料件编号", + "targetMaterialNo": "目标料件编号", + "targetRevision": "目标版本", + "targetExistApprovedNotCopy": "目标料件编号{newItem},版本{newRevision}已存在产品配置作业且状态为已核准,不可执行複製", + "confirmItemPrdParamConfigCover": "目标料件有配置产品生产参数,是否复盖?", + "copyComp": "複製完成", + "selectCategory": "请选择大类", + "selectType": "请选择类别", + "limitType": "限制类型", + "seqLimitedResrceNotEmpty": "序号{seq}的限制设备不可为空", + "formulaDesc": "配方说明", + "spareFormula": "备用配方", + "standardBatchAmount": "标准批量", + "orderSeq": "顺序「{el.seq}」", + "xYNotDuplicate": "X与Y不可重複", + "percent": "百分比", + "string": "字串", + "PDCDesc": "PDC说明", + "specCenter": "规格中心", + "prdConfigPDCParam": "产品配置作业-PDC参数", + "PDCPageSeqResrceNotEmpty": "PDC页签中，序号{seq}的设备类别不可为空", + "PDCPageSeqPDCNoNotEmpty": "PDC页签中，序号{seq}的PDC编号不可为空", + "PDCPageResrceTypeNotDuplicate": "PDC页签设备类别「{typeNo}」不可重複", + "paramNoMsg": "参数编号「{parameterNo}」", + "paramNoRule": "参数编号「{parameterNo}」不符合规格上限>规格下限", + "specificationCannotBeEmpty": "规格不可为空", + "RecipeNo": "Recipe编号", + "RecipeDesc": "Recipe说明", + "RecipeReversion": "Recipe版本", + "prdConfigRecipeParam": "产品配置作业-Recipe参数", + "pageRECIPESeqResrceTypeNotEmpty": "配方页签中，序号{seq}的设备类别不可为空", + "pageRECIPESeqRecipeNoNotEmpty": "配方页签中，序号{seq}的Recipe编号不可为空", + "pageRECIPESeqRecipeNoParamNotEmpty": "配方页签中，序号{seq}的Recipe编号的参数值不可为空", + "pageRECIPESeqRecipeNoHighLimitNotEmpty": "配方页签中，序号{seq}的Recipe编号的规格上限不可为空", + "pageRECIPESeqRecipeNoLowLimitNotEmpty": "配方页签中，序号{seq}的Recipe编号的规格下限不可为空", + "pageRECIPESeqRecipeNoSpecCenterNotEmpty": "配方页签中，序号{seq}的Recipe编号的规格中心不可为空", + "pageRECIPEResrceTypeNotDupilcate": "配方页签中设备类别「{typeNo}」不可重複", + "confirmDelReasonCode": "是否确认删除原因代码： {reasonCode}", + "paramNoDesc": "参数编号说明", + "selectParamNoForDel": "请选择要删除的参数编号", + "RecipeDataConfig": "Recipe主资料配置", + "RecipeDataFields": "Recipe主资料", + "paramItemNotEmpty": "参数清单不可为空", + "confirmDelRecipeNo": "是否确认删除Recipe编号: {recipeNo}", + "copySuccess": "複製成功", + "confirmSegmentChangedDelRouter": "工段已变更，已绘製的途程将删除，是否确定？", + "confirmDelRouter": "是否确认删除途程: {router}/{revision}", + "segmentDataFields": "工段主资料", + "orderShouldPositiveInt": "顺序应为正整数", + "segmentExist": "工段: {segmentNo}已存在", + "confirmDelSegment": "是否确认删除工段: {segmentNo}", + "confirmDelSupplierNo": "是否确定删除供应商编号{supplierNo}", + "phone": "电话", + "routerDraw": "途程-绘製", + "batchRule": "併批规则", + "specialUserBatchNo": "特批客户批号", + "setter": "设定人", + "batchRuleOrderCustom": "併批规则-工单自订", + "selectDelRow": "请先选择要删除的行", + "confirmSeqRemove": "序号{selectedSeqs}，确定要移除该笔资料吗?", + "seqInputSettingValueNRequired": "序号{missingValues}必须输入设定值(N)", + "uncheckCustomDataField": "未勾选相同工单自订的资料栏位", + "seqUserBatchNotEmpty": "序号{emptyLots}的客户批号不可为空", + "seqUserLotDuplicate": "序号{duplicateSeq}，客户批号重複", + "confirmNotSaveChange": "资料已异动且尚未保存，确定要取消此次异动吗?", + "equalPO": "同 PO", + "equalDateCode": "同 DateCode", + "differentPrdBatchNotOverN": "DateCode 不相同的生产批不超过(N)个", + "differenceNotOverWeekN": "DateCode 的差距不超过(N)周", + "equalUserLot": "同客户批号", + "differentUserLotNotOverN": "客户批号不相同的生产批不超过(N)个", + "equalTestingProgramRevision": "相同测试程式与版次", + "sameOrderCcstom": "相同工单自订", + "valid": "有效", + "EQURuleNo": "EQC规则编号", + "sampleRuleNo": "抽样规则编号", + "maxNumber": "最大几个", + "BINNo": "BIN编号", + "indicateBIN": "指定BIN", + "indicateCAT": "指定CAT", + "electricTestingRule": "电性抽测规则", + "confirmDelRuleNo": "是否确认删除{eqcRuleNo}", + "checkBIN": "请勾选BIN", + "sampleMethodMaxBINNotEmpty": "抽样方式为最大N个BIN时，最大几个不能为空", + "selectOneRow": "请先选择一行", + "allGoodCatNumber": "所有Good CAT数", + "indicateSingleCAT": "指定单一CAT", + "indicateMultipleCAT": "指定多个CAT", + "maximumSingleCAT": "最大一个CAT", + "maximumNCAT": "最大N个CAT", + "indicateRepleMultipleCAT": "指定多个CAT顺序补足", + "others": "其他", + "sampleType": "抽样类型", + "FTAutoSplitRule": "FT自动分批规则", + "splitRule": "分批规则", + "transferMethod": "转移方式", + "batchNo": "批号", + "keepOrigin": "沿用原始", + "prdNewNo": "产生新号", + "inputDirect": "直接输入", + "add": "加上", + "subtract": "减去", + "code": "码+", + "applyBIN": "套用BIN", + "applyCAT": "套用CAT", + "selectRouterNo": "请先选择途程编号", + "FTSplichRule": "FT分批规则", + "confirmDelItemSeq": "是否确认删除项次为{seq}", + "transferMethod2": "移转方式", + "itemNoChangeLogicNewNotEmpty": "产品编号变更逻辑为产生新号，料件编号不可为空", + "userPartChangeLogic": "客户料号变更逻辑为产生新号，客户料号不可为空", + "userLotChangeLogic": "客户批号变更逻辑为产生新号，请选择变更方式", + "inputFieldsNotEmpty": "直接输入输入值栏位不可为空", + "addingFieldNotEmpty": "加入输入值栏位不可为空", + "haltCodeOrInputFieldsNotEmpty": "保留码数或输入值栏位不可为空", + "haltCodePositiveInt": "保留码数必需为正整数", + "subtractCodeOrInputNotEmpty": "减去码数或输入值栏位不可为空", + "subtractCodePositiveInt": "减去码数必需为正整数", + "itemNoPositiveInt": "项次必需为正整数", + "leastCheckOneBIN": "至少勾选一个BIN", + "itemNotDuplicate": "项次不可重複", + "productCodeNotEmpty": "产品编号不能为空", + "splitNoRule": "分批编号规则", + "singleTest": "单次测试数", + "singleTestSecond": "单次测试秒数", + "singleTestPositiveInt": "单次测试数数应为正整数", + "ruleSingleTestSecond": "单次测试秒仅可输入大于0的数值，小数点允许2位", + "seqBINNoNotEmpty": "序号{seq}，BIN编号不可为空", + "seqResultNotEmpty": "序号{seq}，结果不可为空", + "CPTestProgram": "CP测试程式", + "FTTestProgram": "FT测试程式", + "insertNewItem": "插入新项", + "removeAll": "移除全部", + "fieldLabel": "栏位标籤", + "mandatory": "必须", + "enterCategory": "请输入类别", + "cannotRemoveDisabledRow": "不能移除已禁用行", + "noItemsToRemove": "没有要移除的项", + "confirmDeleteCustomData": "是否确认删除自订资料 {tableName}", + "numberType": "编号类型", + "orderType": "订单类型", + "definitionMethod": "定义方式", + "defineByContainer": "按容器定义", + "skipSequence": "跳过序列", + "prefix": "首码", + "suffix": "尾码", + "baseNumber": "基数", + "sequenceLength": "序列长度", + "maximumSequence": "最大序列", + "minimumSequence": "最小序列", + "increment": "增量", + "currentSequence": "当前序列", + "resetSequenceNumber": "重置序号", + "commitImmediately": "立即提交", + "numberingRuleExample": "编号规则示例", + "enterOrSelectNumberType": "请输入或选择编号类型", + "enterBaseNumber": "请输入基数", + "maxLength128Characters": "最大长度为128字元", + "enterCurrentSequence": "请输入当前序列", + "materialGroup": "物料组", + "noData": "没有资料", + "searchBeforeDeleting": "请先检索之后再删除", + "never": "从不", + "always": "总是", + "daily": "每天", + "weekly": "每週", + "monthly": "每月", + "yearly": "每年", + "weeklySunday": "每週 - 星期日", + "weeklyMonday": "每週 - 星期一", + "weeklyTuesday": "每週 - 星期二", + "weeklyWednesday": "每週 - 星期三", + "weeklyThursday": "每週 - 星期四", + "weeklyFriday": "每週 - 星期五", + "weeklySaturday": "每週 - 星期六", + "carrierTypeDesc": "载具类型说明", + "enterCarrierType": "请输入载具类型", + "pleaseEnterContainerType": "请输入容器类型", + "enterCarrier": "请输入载具编号", + "layoutColumns": "栏数", + "layoutRows": "列数", + "layoutCapacity": "最大容量", + "layoutMapping": "载具位置图", + "layoutType": "载具位置类型", + "containerType0": "不需要位置", + "containerType1": "单栏排列", + "containerType2": "矩阵排列", + "mappingNo": "位置编码", + "carrierTypeExist": "载具类型: {carrierType}已存在", + "carrierExist": "载具编号: {carrier}已存在", + "confirmDelCarrierType": "是否确认删除载具类型: {carrierType}", + "confirmDelCarrier": "是否确认删除载具编号: {carrier}", + "carrierMemberActive": "载具作业", + "carrierBind": "绑定", + "carrierUnBind": "解绑", + "operationType2": "操作类型", + "carrierNumber": "载具数量", + "carrierTypeBo": "载具类型BO", + "status1": "使用中", + "status2": "闲置", + "automaticGeneration": "自动生成", "lotNo": "Lot No", - "currentLoadQty": "当前装载数量", - "positionLabel": "位置标签", - "position": "位置", - "batchCreation": "批量创建", - "confirmDelWorkGroupNo": "是否确认删除该班组编号：{workGroup}", - "startLineInspectionNumber": "开线检编号", - "lineInspectionConfiguration": "开线检配置", - "addLineInspectionConfiguration": "开线检配置-新增", - "viewLineInspectionConfiguration": "开线检配置-查看", - "editLineInspectionConfiguration": "开线检配置-编辑", - "checkItem": "检查项目", - "processOrProductionLine": "工序/产线", - "availableProductionLines": "可用产线", - "assignedProductionLines": "已指派产线", - "customData": "自定资料", - "deactivate": "停用", - "confirmDeletionOfLineInspectionId": "是否确认删除开线检编号 {id}", - "keyCannotBeEmpty": "{key}不能为空", - "processStep": "工步", - "selectProcessStepToDelete": "请选择要删除的工步", - "action": "动作", - "feeding": "投料", - "issueCommand": "下指令", - "systemIntegration": "系统对接", - "feedingOpen": "投料开启", - "issueCommandWaitForResponseOpen": "下指令 - 等待回应", - "issueCommandNoWaitForResponseOpen": "下指令 - 不等回应", - "alarmOpen": "Alarm 开启", - "systemIntegrationOpen": "系统对接开启", - "actionContent": "动作内容", - "processStepFeedingContent": "工步-投料内容", - "processStepIssueCommandContent": "工步-下指令内容", - "processStepAlarmContent": "工步-Alarm内容", - "processStepSystemIntegrationContent": "工步-系统对接内容", - "processStepParameters": "工步-参数", - "systemName": "系统名称", - "materialCannotBeEmpty": "物料不可为空", - "standardNumberCannotBeEmpty": "标准数不可为空", - "unitQuantityCannotBeEmpty": "单位量不可为空", - "commandIDCannotBeEmpty": "commandID 不可为空", - "eventIDCannotBeEmpty": "Event ID 不可为空", - "systemNameCannotBeEmpty": "系统名称不可为空", - "messageIDCannotBeEmpty": "Message ID 不可为空", - "processStepListCannotBeEmpty": "工步清单不可为空", - "enterProcessStep": "请输入工步", - "selectAction": "请选择动作", - "enterProcessStepActionContent": "请输入工步 {step} 动作 {action} 的动作内容", - "parameterLimitsCannotBeEmpty": "序号 {seq} 参数编号「{parameterNo}」的规格上下限不可为空", - "parameterDoesNotMeetLimits": "序号 {seq} 参数编号「{parameterNo}」不符合规格上限 > 规格下限", - "parameterValueCannotBeEmpty": "序号 {seq} 参数编号「{parameterNo}」的参数值不可为空", - "confirmDeletionOfSelectedRows": "是否确认删除选中的行", - "unbindAllConfirm": "确定解除所有绑定？", - "enterRecipeNumber": "请输入Recipe编号", - "enterVersion": "请输入版本", - "selectType2": "请选择类型", - "enterStandardNumber": "请输入标准数", - "numericInputOnly": "只能输入数值", - "standardNumberMustBeGreaterThanZero": "标准数必须大于零", - "stadQuantityAllowsUpToSixDecimals": "标准数最多允许六位小数", - "enterUnitQuantity": "请输入单位量", - "unitQuantityMustBeGreaterThanZero": "单位量必须大于零", - "unitQuantityAllowsUpToSixDecimals": "单位量最多允许六位小数", - "parameterNumberDuplicated": "参数编号 {parameterNo} 在序号 {duplicatedSeqs} 中重複设定", - "typeNoDuplicated": "设备类别 {typeNo} 在序号 {seq} 中重複设定", - "parameterNumberCannotBeEmpty": "参数编号不可为空", - "specLimitsCannotBeEmpty": "配方页籤，顺序 {seq} Recipe编号 {recipeNo} 的参数编号 {parameterNo} 规格上下限不可为空", - "typeNoParameterValueCannotBeEmpty": "配方页籤，顺序 {seq} Recipe编号 {recipeNo} 的参数编号 {parameterNo} 参数值不可为空", - "carrierPositionDuplicate": "载具位置{No}不可重複", - "workCenterNumber": "工作中心编号", - "mixingLinesAllowed": "是否可混线", - "workCenterCannotBeEmpty": "序号 {seq} 产线编号不可为空", - "workCenterCannotBeDuplicated": "产线编号 {workCenter} 不可重復", - "targetSourceMaterialVersionCannotBeSame": "目标料件编号/版本不可与来源料件编号/版本相同", - "resrceStatus": "设备状态", - "toolStatus": "工具状态", - "rework": "重工", - "subProcess": "子流程", - "tempProcess": "临时流程", - "prd": "製造", - "purchase": "采购", - "overZero": "须大于0", - "carrierSaveSuccessAndPrint": "载具新增成功，是否打印标籤?", - "capacityNotEnough": "载具『{carrier}』容量不足，无法装载", - "positionNotEnough": "载具『{carrier}』位置不足，无法装载", - "overSingleSelected": "请选择一个装载位置", - "positionLotLoaded": "载具位置『{position}』已有摆放LOT，请先移除LOT", - "selectLotDelete": "请先选择要删除的LOT", - "confirmRemoveAll": "是否清空载具上的所有LOT", - "confirmCancel": "是否取消此次变更", - "inputLotNo": "请输入Lot No", - "virtualItem": "虚拟料件编号", - "virtualItemRepeat": "料件明细已有此虚拟料件编号「{item}」，不可重复配置", - "virtualItemExist": "当前物料清单中不存在虚拟料件编号「{item}」", - "virtualItemBind": "虚拟料件「{item}」已被其他料件绑定，不允许删除", - "router": { - "error1": "工艺路线已在使用中，无法删除链接", - "error2": "不能连接自己", - "error3": "不能重复连线", - "error4": "不能回环", - "error5": "工艺路线已在使用中，无法新增节点", - "error6": "请把节点拖入到画布中", - "error7": "开始节点不能重复添加", - "error8": "结束节点不能重复添加", - "error9": "工艺路线已在使用中，无法删除节点", - "error10": "必须有一个开始节点", - "error11": "必须有一个结束节点", - "error12": "途程节点【{node}】步骤不能为空", - "error13": "节点【{node}】步骤【{step}】不可重复", - "error14": "途程节点连接不能为空", - "error15": "途程类型为『维修』，途程上仅可有一个维修工序", - "confirm1": "确定删除所点击的线吗?", - "confirm2": "确定要删除节点[{node}]?", - "success1": "连线成功" - }, - "sequenceDeviceCategoryPdcParameterValueNotMaintained": "PDC参数值未维护，不允许保存", - "startNode": "开始节点", - "otherSteps": "其它步骤", - "reworkProcess": "重工流程", - "nodeInformation": "节点信息", - "erpSteps": "ERP步骤", - "connectionInformation": "连线信息", - "script": "脚本", - "processDataInformation": "流程数据信息", - "processRouteInformation": "工艺路线信息", - "reservedIdentifier": "保留标识", - "processRouteType": "工艺路线类型", - "enterProcessRoute": "请输入工艺路线", - "selectProcessRouteType": "请选择工艺路线类型", - "returnToOriginalState": "返回（原始状态）", - "returnToAny": "返回（任意）", - "returnToPrevious": "返回（上一个）", - "returnToAnyPrevious": "返回（任意上一个）", - "returnToNext": "返回（下一个）", - "cannotCreateCycle": "不能回环", - "ruleCategory": "规则类别", - "format": "格式", - "firstEntryNotDeletable": "第一笔不允许删除", - "orderCannotBeEmpty": "顺序不可为空", - "orderCannotBeDuplicated": "顺序不可重複", - "ruleCategoryCannotBeEmpty": "规则类别不可为空", - "ruleCategoryCannotBeDuplicated": "规则类别不可重複", - "formatDefinition": "格式定义", - "pleaseEnterMaterialNumberFirst": "请先输入料件编号", - "noSuchMaterialNumber": "无此料件编号" + "currentLoadQty": "当前装载数量", + "positionLabel": "位置标签", + "position": "位置", + "batchCreation": "批量创建", + "confirmDelWorkGroupNo": "是否确认删除该班组编号：{workGroup}", + "startLineInspectionNumber": "开线检编号", + "lineInspectionConfiguration": "开线检配置", + "addLineInspectionConfiguration": "开线检配置-新增", + "viewLineInspectionConfiguration": "开线检配置-查看", + "editLineInspectionConfiguration": "开线检配置-编辑", + "checkItem": "检查项目", + "processOrProductionLine": "工序/产线", + "availableProductionLines": "可用产线", + "assignedProductionLines": "已指派产线", + "customData": "自定资料", + "deactivate": "停用", + "confirmDeletionOfLineInspectionId": "是否确认删除开线检编号 {id}", + "keyCannotBeEmpty": "{key}不能为空", + "processStep": "工步", + "selectProcessStepToDelete": "请选择要删除的工步", + "action": "动作", + "feeding": "投料", + "issueCommand": "下指令", + "systemIntegration": "系统对接", + "feedingOpen": "投料开启", + "issueCommandWaitForResponseOpen": "下指令 - 等待回应", + "issueCommandNoWaitForResponseOpen": "下指令 - 不等回应", + "alarmOpen": "Alarm 开启", + "systemIntegrationOpen": "系统对接开启", + "actionContent": "动作内容", + "processStepFeedingContent": "工步-投料内容", + "processStepIssueCommandContent": "工步-下指令内容", + "processStepAlarmContent": "工步-Alarm内容", + "processStepSystemIntegrationContent": "工步-系统对接内容", + "processStepParameters": "工步-参数", + "systemName": "系统名称", + "materialCannotBeEmpty": "物料不可为空", + "standardNumberCannotBeEmpty": "标准数不可为空", + "unitQuantityCannotBeEmpty": "单位量不可为空", + "commandIDCannotBeEmpty": "commandID 不可为空", + "eventIDCannotBeEmpty": "Event ID 不可为空", + "systemNameCannotBeEmpty": "系统名称不可为空", + "messageIDCannotBeEmpty": "Message ID 不可为空", + "processStepListCannotBeEmpty": "工步清单不可为空", + "enterProcessStep": "请输入工步", + "selectAction": "请选择动作", + "enterProcessStepActionContent": "请输入工步 {step} 动作 {action} 的动作内容", + "parameterLimitsCannotBeEmpty": "序号 {seq} 参数编号「{parameterNo}」的规格上下限不可为空", + "parameterDoesNotMeetLimits": "序号 {seq} 参数编号「{parameterNo}」不符合规格上限 > 规格下限", + "parameterValueCannotBeEmpty": "序号 {seq} 参数编号「{parameterNo}」的参数值不可为空", + "confirmDeletionOfSelectedRows": "是否确认删除选中的行", + "unbindAllConfirm": "确定解除所有绑定？", + "enterRecipeNumber": "请输入Recipe编号", + "enterVersion": "请输入版本", + "selectType2": "请选择类型", + "enterStandardNumber": "请输入标准数", + "numericInputOnly": "只能输入数值", + "standardNumberMustBeGreaterThanZero": "标准数必须大于零", + "stadQuantityAllowsUpToSixDecimals": "标准数最多允许六位小数", + "enterUnitQuantity": "请输入单位量", + "unitQuantityMustBeGreaterThanZero": "单位量必须大于零", + "unitQuantityAllowsUpToSixDecimals": "单位量最多允许六位小数", + "parameterNumberDuplicated": "参数编号 {parameterNo} 在序号 {duplicatedSeqs} 中重複设定", + "typeNoDuplicated": "设备类别 {typeNo} 在序号 {seq} 中重複设定", + "parameterNumberCannotBeEmpty": "参数编号不可为空", + "specLimitsCannotBeEmpty": "配方页籤，顺序 {seq} Recipe编号 {recipeNo} 的参数编号 {parameterNo} 规格上下限不可为空", + "typeNoParameterValueCannotBeEmpty": "配方页籤，顺序 {seq} Recipe编号 {recipeNo} 的参数编号 {parameterNo} 参数值不可为空", + "carrierPositionDuplicate": "载具位置{No}不可重複", + "workCenterNumber": "工作中心编号", + "mixingLinesAllowed": "是否可混线", + "workCenterCannotBeEmpty": "序号 {seq} 产线编号不可为空", + "workCenterCannotBeDuplicated": "产线编号 {workCenter} 不可重復", + "targetSourceMaterialVersionCannotBeSame": "目标料件编号/版本不可与来源料件编号/版本相同", + "resrceStatus": "设备状态", + "toolStatus": "工具状态", + "rework": "重工", + "subProcess": "子流程", + "tempProcess": "临时流程", + "prd": "製造", + "purchase": "采购", + "overZero": "须大于0", + "carrierSaveSuccessAndPrint": "载具新增成功，是否打印标籤?", + "capacityNotEnough": "载具『{carrier}』容量不足，无法装载", + "positionNotEnough": "载具『{carrier}』位置不足，无法装载", + "overSingleSelected": "请选择一个装载位置", + "positionLotLoaded": "载具位置『{position}』已有摆放LOT，请先移除LOT", + "selectLotDelete": "请先选择要删除的LOT", + "confirmRemoveAll": "是否清空载具上的所有LOT", + "confirmCancel": "是否取消此次变更", + "inputLotNo": "请输入Lot No", + "virtualItem": "虚拟料件编号", + "virtualItemRepeat": "料件明细已有此虚拟料件编号「{item}」，不可重复配置", + "virtualItemExist": "当前物料清单中不存在虚拟料件编号「{item}」", + "virtualItemBind": "虚拟料件「{item}」已被其他料件绑定，不允许删除", + "router": { + "error1": "工艺路线已在使用中，无法删除链接", + "error2": "不能连接自己", + "error3": "不能重复连线", + "error4": "不能回环", + "error5": "工艺路线已在使用中，无法新增节点", + "error6": "请把节点拖入到画布中", + "error7": "开始节点不能重复添加", + "error8": "结束节点不能重复添加", + "error9": "工艺路线已在使用中，无法删除节点", + "error10": "必须有一个开始节点", + "error11": "必须有一个结束节点", + "error12": "途程节点【{node}】步骤不能为空", + "error13": "节点【{node}】步骤【{step}】不可重复", + "error14": "途程节点连接不能为空", + "error15": "途程类型为『维修』，途程上仅可有一个维修工序", + "confirm1": "确定删除所点击的线吗?", + "confirm2": "确定要删除节点[{node}]?", + "success1": "连线成功" + }, + "sequenceDeviceCategoryPdcParameterValueNotMaintained": "PDC参数值未维护，不允许保存", + "startNode": "开始节点", + "otherSteps": "其它步骤", + "reworkProcess": "重工流程", + "nodeInformation": "节点信息", + "erpSteps": "ERP步骤", + "connectionInformation": "连线信息", + "script": "脚本", + "processDataInformation": "流程数据信息", + "processRouteInformation": "工艺路线信息", + "reservedIdentifier": "保留标识", + "processRouteType": "工艺路线类型", + "enterProcessRoute": "请输入工艺路线", + "selectProcessRouteType": "请选择工艺路线类型", + "returnToOriginalState": "返回（原始状态）", + "returnToAny": "返回（任意）", + "returnToPrevious": "返回（上一个）", + "returnToAnyPrevious": "返回（任意上一个）", + "returnToNext": "返回（下一个）", + "cannotCreateCycle": "不能回环", + "ruleCategory": "规则类别", + "format": "格式", + "firstEntryNotDeletable": "第一笔不允许删除", + "orderCannotBeEmpty": "顺序不可为空", + "orderCannotBeDuplicated": "顺序不可重複", + "ruleCategoryCannotBeEmpty": "规则类别不可为空", + "ruleCategoryCannotBeDuplicated": "规则类别不可重複", + "formatDefinition": "格式定义", + "pleaseEnterMaterialNumberFirst": "请先输入料件编号", + "noSuchMaterialNumber": "无此料件编号" } diff --git a/src/locale/i18n/zh/mes/qms.json b/src/locale/i18n/zh/mes/qms.json index 7819591..7619e2d 100755 --- a/src/locale/i18n/zh/mes/qms.json +++ b/src/locale/i18n/zh/mes/qms.json @@ -94,7 +94,7 @@ "specificationControlCannotBeEmpty": "规格控管不可为空", "sampleNumberCannotBeEmpty": "样本数不可为空", "operationSuccessful": "{showTitle} 成功", - "confirmDeleteInspectionPlan": "是否确定删除检验计画: {qcPlan}", + "confirmDeleteInspectionPlan": "是否确定删除检验计划: {qcPlan}", "spcAnalysis": "SPC分析", "measurement": "计量", "inspectionItemCannotBeEmpty": "检验项目不可为空", @@ -138,7 +138,7 @@ "firstProductionBatchAfterHoursOfReactivation": "小时以上再启用第一个生产的程式批/SFC", "interval": "间隔", "hoursMachinePlusMaterial": "小时(机台+物料)", - "hoursMachinePlusInspectionPlan": "小时(机台+检验计画)", + "hoursMachinePlusInspectionPlan": "小时(机台+检验计划)", "every": "每", "perBatchOrSfc": "个程式批/SFC", "fixedTimeEveryDay": "每日固定几点", @@ -182,4 +182,4 @@ "calibTaskClose": "校验任务-关闭", "calibTaskClosed": "校验任务『{jobNo}』已关闭", "inspectionItemValueEmpty2": "检验项目: {qcItem}{msg}的检验值不可为空" -} \ No newline at end of file +} diff --git a/src/locale/i18n/zh/mes/wms.json b/src/locale/i18n/zh/mes/wms.json index fd4b913..1a9e597 100755 --- a/src/locale/i18n/zh/mes/wms.json +++ b/src/locale/i18n/zh/mes/wms.json @@ -1,318 +1,318 @@ { - "alreadyInbound": "已入库", - "confirmed": "已确认", - "stockinType": "入库类型", - "stockinQuantity": "入库数量", - "rawMaterialInboundOrderNo": "原料入库单号", - "rawMaterialInboundAdd": "原料入库单-新增", - "rawMaterialInboundEdit": "原料入库单-编辑", - "rawMaterialInboundDetailAdd": "原料入库单明细-新增", - "purchaseOrderAdd": "採购单-新增", - "purchaseOrder": "採购单", - "purchaseOrderDetailAdd": "採购单明细-新增", - "purchaseDetailEdit": "採购明细-编辑", - "outInv": "出库仓库", - "inInv": " 入库仓库", - "outInvNo": "出库仓库编号", - "outInvDesc": "出库仓库说明", - "inInvNo": "入库仓库编号", - "inInvNoDesc": "入库仓库说明", - "documentStatus": "单据状态", - "documentToDate": "~", - "addDetails": "新增明细", - "defectiveGoodsInbound": "不良品入库", - "inboundOrderAdd": "入库单-新增", - "inboundOrderEdit": "入库单-编辑", - "inboundOrderConfirm": "入库单-确认", - "confirmDeletion": "是否删除入库单", - "workOrderReturnAdd": "工单退料单-新增", - "workOrderReturnEdit": "工单退料单-编辑", - "inputFirst": "请先输入", - "selectFirst": "请先选择", - "enterSerialNumber": "请输入序号", - "is": "的", - "transferLocationsCannotBeSame": "转出仓库/储位 与 转入仓库/储位 不可相同", - "returnQuantityMustBeGreaterThanZero": "退料数量必须大于0", - "errorMessage": { - "documentStartDate": "单据日期(起)不可大于单据日期(迄)", - "startDateGreaterThanEndDate": "製造日期(起)不可大于製造日期(迄)", - "manufactureDateCannotExceedExpiryDate": "製造日期不可大于到期日", - "documentDateRange": "单据日期区间不可大于30天", - "documentStartDateRequired": "单据日期(起)不可为空", - "documentEndDateRequired": "单据日期(迄)不可为空", - "documentStartEndDateError": "单据日期起始时间不可大于结束时间", - "clauseOneInput": "至少要输入一项条件", - "noSuchLotNo": "无此 Lot No『{lotNo}』", - "noSuchMaterialBatchNumber": "无此 料件批号『{MaterialBatchNumber}』", - "lotNoNotEnabled": "Lot No 不是启用状态, 不可执行分批", - "MaterialBatchNumberNotEnabled": "料件批号 不是启用状态, 不可执行分批", - "MaterialBatchNumberNotFeeding": "料件批号 不是启用状态, 不可执行上料", - "quantityNotEmpty": "数量不可为空", - "batchQuantityGreaterThanOne": "分批数量必须大于1", - "batchQuantityLessThanExisting": "分批数量必须小于现有数量", - "newBatchNumberCannotBeSameAsOld": "新批号不可与旧批号重複", - "createReturnDetails": "请建立退料明细", - "confirmExecutionOfReturnOrder": "是否要执行退料单确认", - "purchaseOrderItemExists": "採购单『{purchaseNo}』,料号『{item}』已存在。" - }, - "messages": { - "saveFailure": "保存失败", - "confirmSuccess": "确认成功", - "confirmFailure": "确认失败", - "pickLotNo": "挑选 Lot No", - "checkLotNo": "请勾选 LotNo", - "clauseOneFilling": "至少需要填写一个输入框", - "lotNoStorageDuplicate": "Lot No \"{lotNo}\" 与储位 \"{storageNo}\" 重複", - "selectOutWarehouseFirst": "请先选择 出库仓库编号", - "selectInWarehouseFirst": "请先选择 入库仓库编号", - "duplicateEntry": "序号 \"{firstIndex}\" 和 \"{secondIndex}\", Lot No \"{materialLot}\", 储位 \"{storageNo}\" 重複", - "selectWarehouseReceipt": "请选择入库单", - "selectTypeAndWarehouseFirst": "请先选择入库类型和出库仓库编号", - "selectStockInTypeFirst": "请先选择入库类型", - "selectStockInMessageFirst": "请先选择入库讯息", - "lotNoExportSuccess": "Lot No 清单汇出成功", - "MaterialBatchNumberExportSuccess": "料件批号 清单汇出成功", - "ExportSuccess": "汇出成功", - "rackingSuccess": "上架成功", - "unshelvingSuccess": "下架成功", - "selectLotNoForRack": "请勾选要上架的 Lot No", - "selectLotNoForUnrack": "请勾选要下架的 Lot No", - "lotNoFieldEmpty": "Lot No『{lotNo}』的{field}不可为空", - "materialBatchNumberFieldEmpty": "料件批号『{materialBatchNumber}』的 {field} 不可为空", - "enterWarehouseNo": "请先输入下料仓库编号", - "enterRack": "请先输入下料货架", - "emptyLocation": "下料货位不可为空", - "confirmUnloading": "是否确定下料?", - "unloadingSuccess": "下料成功", - "enterDischargeQuantity": "请输入下料数量", - "selectMaterialBatchNumberForRack": "请勾选要上架的 料件批号", - "selectMaterialBatchNumberForUnrack": "请勾选要下架的 料件批号", - "loadingQuantityNotEmpty": "上料数量不可为空", - "loadingSuccess": "上料成功", - "loadingQuantityExceedsStock": "上料数量不可大于库存数量", - "doNotEmpty": "不可为空", - "totalSplitQuantityNotEqualOriginal": "分批数量加总不等于原料件批号数量", - "confirmBatchOperation": "确定执行分批次工作吗?", - "mismatchAfterUnpacking": "收料单号『{receiptNo}』,项次『{seq}』,拆包后总数与拆包前数量不符", - "quantityAfterUnpackingNotEmpty": "拆包后数量不可为空", - "createPurchaseItem": "请建立採购项次", - "confirmPurchaseOrderChange": "採购单号『{purchascefeNo}』确认后即不可再更改明细项次, 是否确定?", - "confirmDeletePurchaseOrder": "採购单号『{purchaseNo}』是否确定删除?", - "confirmInvalidatePurchaseOrder": "採购单号『{purchaseNo}』是否确定作废?" - }, - "defectiveGoodsWarehouse": "不良品仓", - "defectiveGoodsWarehouseShelving": "不良品仓上架作业", - "defectiveGoodsUnshelving": "不良品仓下架作业", - "defectiveGoodsInTemporaryWarehouse": "不良品暂存仓", - "defectiveGoodsInTemporaryWarehouseShelving": "不良品暂存仓上架作业", - "defectiveGoodsInTemporaryUnshelving": "不良品暂存仓下架作业", - "GoodsInTemporaryWarehouse": "良品暂存仓", - "GoodsInTemporaryWarehouseShelving": "良品暂存仓上架作业", - "GoodsInTemporaryUnshelving": "良品暂存仓下架作业", - "loadingQuantity": "上料数量", - "confirmations": { - "confirmDeleteReturnOrderDetail": "是否删除退料单号『{inNo}』,同一收料单『{receiptNo}』,同一项次『{seq}』的入库单明细?", - "confirmStockInOrderExecution": "是否要执行入库单确认", - "deleteDetail": "是否删除此笔入库明细?", - "executeRacking": "确定执行上架作业吗?", - "executeUnshelving": "确定执行下架作业吗?", - "removeLotNo": "确定移除此笔 Lot No『{lotNo}』吗?", - "removeMaterialBatchNumber": "确定移除此笔 料件批号『{MaterialBatchNumber}』吗?", - "confirmLoading": "是否确定上料至『{newResource}』?", - "confirmDeletionOfReturnOrderDetail": "是否删除此笔退料单明细" - }, - "finishedGoodsWarehouse": "成品仓", - "finishedGoodsWarehouseShelving": "成品仓上架作业", - "finishedGoodsWarehouseUnshelving": "成品仓下架作业", - "finishedGoodsInTemporaryWarehouse": "成品暂存仓", - "finishedGoodsInTemporaryWarehouseShelving": "成品暂存仓上架作业", - "finishedGoodsInTemporaryUnshelving": "成品暂存仓下架作业", - "lineSideWarehouseShelving": "线边仓上架作业", - "lineSideWarehouseUnshelving": "线边仓下架作业", - "lineSideWarehouseBatchOperation": "线边仓分批次工作", - "materialWarehouse": "原料仓", - "materialWarehouseShelving": "原料仓上架作业", - "materialWarehouseUnshelving": "原料仓下架作业", - "equipmentLoading": "设备上料", - "rawMaterialUnpacking": "原料拆包作业", - "minimumPackingNumber": "最小包装数", - "unpackingSuccess": "拆包成功", - "enterMinimumPackagingNumber": "请输入最小包装数", - "tableObj": { - "lotNo": "Lot No", - "warehouseQty": "库存数量", - "warehouseTotalQty": "总库存数量", - "transferOutWarehouse": "转出仓库", - "transferOutStorageNo": "转出储位", - "transferInWarehouse": "转入仓库", - "transferInStorageNo": "转入储位", - "rackNo": "货架编号", - "rack": "货架", - "locationNo": "货位", - "kind": "仓库类型", - "batchNumberPrinciple": "批号原则", - "batchingPrinciple": "分批原则" - }, - "validation": { - "numberGreaterThanZero": "下料数量必须大于0" - }, - "alreadyListed": "已上架", - "notListed": "未上架", - "putOnShelf": "上架", - "takeOffShelf": "下架", - "numberOfEntries": "笔数", - "errors": { - "rackNumberEmpty": "Lot No『{lotNo}』的货架编号不可为空", - "locationNumberEmpty": "Lot No『{lotNo}』的货位不可为空", - "storageNumberEmpty": "Lot No『{lotNo}』的储位不可为空" - }, - "loadingTime": "上料时间", - "feeding": "上料", - "originalWarehouseNumber": "原仓库编号", - "originalRackNoNumber": "原货架编号", - "originalLocation": "原货位", - "originalStorage": "原储位", - "unloadMaterial": "下料", - "warehouse": "仓库", - "supplierBatch": "供应商批号", - "dateExp": "到期日", - "creator": "建立人员", - "quantityBeforeUnpacking": "拆包前数量", - "quantityAfterUnpacking": "拆包后数量", - "returnMaterialOrderNumber": "退料单号", - "returnQuantity": "退料数量", - "staffNumber": "人员编号", - "receivingDetailConfirmation": "收料明细-确认", - "receivingDetailAttachment": "收料明细-附件", - "receivingDetailAdd": "收料明细-新增", - "samplingPlan": "抽样计划", - "specialProcurement": "特採", - "exemptFromInspection": "免验", - "receivingStaff": "收料人员", - "receivingTime": "收料时间", - "warehousing": "入库", - "qualified": "合格", - "uninspected": "未检验", - "specialProcurementDescription": "特采说明", - "confirmPerson": "确认人员", - "confirmTime": "确认时间", - "shouldDrawNumber": "应抽数", - "okNumber": "OK数", - "ngNumber": "NG数", - "isSpecialProcurement": "是否特采", - "inspectionTime": "检验时间", - "shouldDrawNumberMustBeGreaterThanZero": "应抽数必须大于0", - "allowableReturnNumberMustBeGreaterThanZero": "允退数必须大于0", - "inspectionQuantityDoesNotMatchSamplingQuantity": "检验数量不符抽样数量", - "inspectionWorkNotCompleted": "检验作业未完成", - "specialProcurementDescriptionCannotBeEmpty": "特采说明不可为空", - "milStd105ETable": "MIL-STD-105E表", - "editDetails": "编辑明细", - "createReceivingItem": "请建立收料项次", - "allItemsInReceivingOrderExemptFromInspection": "收料单中项次均为免验, 收货后不得作废收料单, 是否确定收货?", - "isPurchaseOrderNumberSureToBeVoided": "採购单号{purchaseNo}是否确定作废", - "damageQuantity": "破坏数量", - "retentionQuantity": "留样数量", - "purchaseQuantity": "採购数量", - "receivedMaterialQuantity": "已收料数量", - "receivingOrderDetailEdit": "收料单明细-编辑", - "receivingOrderDetailNew": "收料单明细-新增", - "receivingOrderAdd": "收料单-新增", - "receivingQuantityCannotBeEmpty": "收料数量不可为空", - "numberOfEntriesMustBeGreaterThanZero": "笔数需大于0", - "itemNumber": "料件编号{item}", - "returnableStockQuantity": "可退库数量", - "returnStockQuantity": "退库数量", - "rawMaterialWarehouseReturn": "原料仓退回", - "defectiveGoodsWarehouseReturn": "不良品仓退回", - "returnOrderAdd": "退库单-新增", - "returnOrderEdit": "退库单-编辑", - "createReturnDetail": "请建立退库明细", - "executeReturnOrderConfirmation": "是否要执行退库单确认?", - "deleteReturnOrder": "是否删除退库单『 {returnNo} 』?", - "returnType": "退库类型", - "returnOrderDetail": "退库单明细", - "returnOrderDetailAdd": "退库单明细-新增", - "enterReturnQuantityForItem": "请输入序号『{index}』，料件批号『{materialLot}』的退库数量", - "returnQuantityForItemMustBeGreaterThanZero": "序号『{index}』，料件批号『{materialLot}』的退库数量必须大于0", - "materialLotAndStorageNoDuplicate": "料件批号『{materialLot}』，储位『{storageNo}』重複，请合併为一笔", - "returnOrderSavedSuccessfully": "退库单储存成功", - "areYouSureToDeleteThisReturnDetail": "是否删除此笔退库明细?", - "issueOrderAdd": "发料单-新增", - "issueOrderDetailEdit": "发料单明细-编辑", - "issueOrderDetailAdd": "发料单明细-新增", - "createIssueDetail": "请建立发料明细", - "executeIssueOrderConfirmation": "是否要执行发料单确认?", - "deleteIssueOrder": "是否删除发料单『 {issueNo} 』?", - "issueQuantity": "发料数量", - "issueOrderNumber": "发料单号", - "mtlIssueOrderNo": "发料单号", - "availableIssueQuantity": "可发料数量", - "enterIssueQuantityForItem": "请输入序号『{index}』，料件批号『{materialLot}』的发料数量", - "issueQuantityForItemMustBeGreaterThanZero": "序号『{index}』，料件批号『{materialLot}』的发料数量必须大于0", - "enterTransferInWarehouseForItem": "请输入序号『{index}』，料件批号『{materialLot}』的转入仓库", - "transferInWarehouseForItemCannotEqualTransferOut": "序号『{index}』，料件批号『{materialLot}』的转入仓库不可等于转出仓库", - "enterIssueWorkOrderForItem": "请输入序号『{index}』，料件批号『{materialLot}』的发料工单", - "areYouSureToDeleteThisIssueDetail": "是否删除此笔发料明细?", - "inventoryOrderNumber": "盘点单号", - "inventoryType": "盘点类型", - "login": "登录", - "inventoryInProgress": "盘点中", - "initialCountQuantity": "初盘数量", - "recountQuantity": "複盘数量", - "inventoryShortage": "盘亏", - "inventoryPlan": "盘点计画", - "executionDate": "执行日期", - "initialCountDate": "初盘日期", - "voidDate": "作废日期", - "initialCountPersonnel": "初盘人员", - "voidPersonnel": "作废人员", - "recountDate": "複盘日期", - "recountPersonnel": "複盘人员", - "plannedDate": "计画日期", - "createInventoryOrderDetail": "请建立盘点单明细", - "executeInventoryOrderConfirmation": "是否要执行盘点单确认?", - "executeInventoryOrderVoid": "是否要执行盘点单作废?", - "executeInventoryOrderDeletion": "是否要执行盘点单删除?", - "inventoryOrderCompletionWillAdjustStock": "盘点单完成会依盘点盈亏自动调整库存，是否要执行盘点单完成?", - "inventoryCompleted": "盘点完成", - "initialCountNotConfirmedCannotComplete": "初盘尚未确定，不可执行完成", - "recountNotConfirmedCannotComplete": "複盘尚未确定，不可执行完成", - "plannedStartDateCannotExceedEndDate": "计画日期(起)不可大于计画日期(迄)", - "plannedDateRangeCannotExceed30Days": "计画日期区间不可大于30天", - "selectMaterialLotNumber": "挑选料件批号", - "pleaseCheckMaterialLotNumber": "请勾选料件批号", - "inventoryConfirmation": "盘点确定", - "inventoryDetails": "盘点明细", - "inventoryRegistration": "盘点登录", - "noMaterialLotNumberInWarehouse": "仓库『{invNo}』无此料件批号", - "initialCount": "初盘", - "recount": "複盘", - "confirmNoMoreInputOfQuantity": "确定后不可再输入{msg}数量，是否要执行盘点确认?", - "inventoryDetailSavedSuccessfully": "盘点明细储存成功", - "areYouSureToDeleteThisInventoryDetail": "是否删除此笔盘点明细?", - "initialCountQuantityCannotBeEmpty": "序号『{seq}』，初盘数量不可为空", - "planDateFormatError": "计画日期格式错误", - "planDateCannotBeEarlierThanCurrentDate": "计画日期不可小于当前日期", - "inventoryPlanSavedSuccessfully": "盘点计画储存成功", - "transferOrderNumber": "调拨单号", - "deleteTransferOrder": "是否删除调拨单『 {transferNo} 』?", - "executeTransferOrderConfirmation": "是否要执行调拨单确认?", - "transferQuantity": "调拨数量", - "availableTransferQuantity": "可调拨数量", - "transferOrderAdd": "调拨单-新增", - "transferOrderEdit": "调拨单-编辑", - "materialLotStorageInvDuplicate": "料件批号『{materialLot}』，储位『{storageNo}』，转入仓库『{invNo}』重複，请合併为一笔", - "pleaseSelectTransferOrderDetail": "请选择调拨单明细", - "transferQuantityExceedsAvailable": "料件批号『{materialLot}』的调拨数量超过可调拨数量", - "enterTransferQuantityForItem": "请输入序号『{index}』，料件批号『{materialLot}』的调拨数量", - "transferQuantityForItemMustBeGreaterThanZero": "序号『{index}』，料件批号『{materialLot}』的调拨数量必须大于0", - "areYouSureToDeleteThisTransferDetail": "是否删除此笔调拨明细?", - "feedingWarehouseNumber": "下料仓库编号", - "feedingStorageLocation": "下料储位", - "feedingQuantity": "下料数量", - "invType": { - "0": "立库", - "1": "平库" - } + "alreadyInbound": "已入库", + "confirmed": "已确认", + "stockinType": "入库类型", + "stockinQuantity": "入库数量", + "rawMaterialInboundOrderNo": "原料入库单号", + "rawMaterialInboundAdd": "原料入库单-新增", + "rawMaterialInboundEdit": "原料入库单-编辑", + "rawMaterialInboundDetailAdd": "原料入库单明细-新增", + "purchaseOrderAdd": "採购单-新增", + "purchaseOrder": "採购单", + "purchaseOrderDetailAdd": "採购单明细-新增", + "purchaseDetailEdit": "採购明细-编辑", + "outInv": "出库仓库", + "inInv": " 入库仓库", + "outInvNo": "出库仓库编号", + "outInvDesc": "出库仓库说明", + "inInvNo": "入库仓库编号", + "inInvNoDesc": "入库仓库说明", + "documentStatus": "单据状态", + "documentToDate": "~", + "addDetails": "新增明细", + "defectiveGoodsInbound": "不良品入库", + "inboundOrderAdd": "入库单-新增", + "inboundOrderEdit": "入库单-编辑", + "inboundOrderConfirm": "入库单-确认", + "confirmDeletion": "是否删除入库单", + "workOrderReturnAdd": "工单退料单-新增", + "workOrderReturnEdit": "工单退料单-编辑", + "inputFirst": "请先输入", + "selectFirst": "请先选择", + "enterSerialNumber": "请输入序号", + "is": "的", + "transferLocationsCannotBeSame": "转出仓库/储位 与 转入仓库/储位 不可相同", + "returnQuantityMustBeGreaterThanZero": "退料数量必须大于0", + "errorMessage": { + "documentStartDate": "单据日期(起)不可大于单据日期(迄)", + "startDateGreaterThanEndDate": "製造日期(起)不可大于製造日期(迄)", + "manufactureDateCannotExceedExpiryDate": "製造日期不可大于到期日", + "documentDateRange": "单据日期区间不可大于30天", + "documentStartDateRequired": "单据日期(起)不可为空", + "documentEndDateRequired": "单据日期(迄)不可为空", + "documentStartEndDateError": "单据日期起始时间不可大于结束时间", + "clauseOneInput": "至少要输入一项条件", + "noSuchLotNo": "无此 Lot No『{lotNo}』", + "noSuchMaterialBatchNumber": "无此 料件批号『{MaterialBatchNumber}』", + "lotNoNotEnabled": "Lot No 不是启用状态, 不可执行分批", + "MaterialBatchNumberNotEnabled": "料件批号 不是启用状态, 不可执行分批", + "MaterialBatchNumberNotFeeding": "料件批号 不是启用状态, 不可执行上料", + "quantityNotEmpty": "数量不可为空", + "batchQuantityGreaterThanOne": "分批数量必须大于1", + "batchQuantityLessThanExisting": "分批数量必须小于现有数量", + "newBatchNumberCannotBeSameAsOld": "新批号不可与旧批号重複", + "createReturnDetails": "请建立退料明细", + "confirmExecutionOfReturnOrder": "是否要执行退料单确认", + "purchaseOrderItemExists": "採购单『{purchaseNo}』,料号『{item}』已存在。" + }, + "messages": { + "saveFailure": "保存失败", + "confirmSuccess": "确认成功", + "confirmFailure": "确认失败", + "pickLotNo": "挑选 Lot No", + "checkLotNo": "请勾选 LotNo", + "clauseOneFilling": "至少需要填写一个输入框", + "lotNoStorageDuplicate": "Lot No \"{lotNo}\" 与储位 \"{storageNo}\" 重複", + "selectOutWarehouseFirst": "请先选择 出库仓库编号", + "selectInWarehouseFirst": "请先选择 入库仓库编号", + "duplicateEntry": "序号 \"{firstIndex}\" 和 \"{secondIndex}\", Lot No \"{materialLot}\", 储位 \"{storageNo}\" 重複", + "selectWarehouseReceipt": "请选择入库单", + "selectTypeAndWarehouseFirst": "请先选择入库类型和出库仓库编号", + "selectStockInTypeFirst": "请先选择入库类型", + "selectStockInMessageFirst": "请先选择入库讯息", + "lotNoExportSuccess": "Lot No 清单汇出成功", + "MaterialBatchNumberExportSuccess": "料件批号 清单汇出成功", + "ExportSuccess": "汇出成功", + "rackingSuccess": "上架成功", + "unshelvingSuccess": "下架成功", + "selectLotNoForRack": "请勾选要上架的 Lot No", + "selectLotNoForUnrack": "请勾选要下架的 Lot No", + "lotNoFieldEmpty": "Lot No『{lotNo}』的{field}不可为空", + "materialBatchNumberFieldEmpty": "料件批号『{materialBatchNumber}』的 {field} 不可为空", + "enterWarehouseNo": "请先输入下料仓库编号", + "enterRack": "请先输入下料货架", + "emptyLocation": "下料货位不可为空", + "confirmUnloading": "是否确定下料?", + "unloadingSuccess": "下料成功", + "enterDischargeQuantity": "请输入下料数量", + "selectMaterialBatchNumberForRack": "请勾选要上架的 料件批号", + "selectMaterialBatchNumberForUnrack": "请勾选要下架的 料件批号", + "loadingQuantityNotEmpty": "上料数量不可为空", + "loadingSuccess": "上料成功", + "loadingQuantityExceedsStock": "上料数量不可大于库存数量", + "doNotEmpty": "不可为空", + "totalSplitQuantityNotEqualOriginal": "分批数量加总不等于原料件批号数量", + "confirmBatchOperation": "确定执行分批次工作吗?", + "mismatchAfterUnpacking": "收料单号『{receiptNo}』,项次『{seq}』,拆包后总数与拆包前数量不符", + "quantityAfterUnpackingNotEmpty": "拆包后数量不可为空", + "createPurchaseItem": "请建立採购项次", + "confirmPurchaseOrderChange": "採购单号『{purchascefeNo}』确认后即不可再更改明细项次, 是否确定?", + "confirmDeletePurchaseOrder": "採购单号『{purchaseNo}』是否确定删除?", + "confirmInvalidatePurchaseOrder": "採购单号『{purchaseNo}』是否确定作废?" + }, + "defectiveGoodsWarehouse": "不良品仓", + "defectiveGoodsWarehouseShelving": "不良品仓上架作业", + "defectiveGoodsUnshelving": "不良品仓下架作业", + "defectiveGoodsInTemporaryWarehouse": "不良品暂存仓", + "defectiveGoodsInTemporaryWarehouseShelving": "不良品暂存仓上架作业", + "defectiveGoodsInTemporaryUnshelving": "不良品暂存仓下架作业", + "GoodsInTemporaryWarehouse": "良品暂存仓", + "GoodsInTemporaryWarehouseShelving": "良品暂存仓上架作业", + "GoodsInTemporaryUnshelving": "良品暂存仓下架作业", + "loadingQuantity": "上料数量", + "confirmations": { + "confirmDeleteReturnOrderDetail": "是否删除退料单号『{inNo}』,同一收料单『{receiptNo}』,同一项次『{seq}』的入库单明细?", + "confirmStockInOrderExecution": "是否要执行入库单确认", + "deleteDetail": "是否删除此笔入库明细?", + "executeRacking": "确定执行上架作业吗?", + "executeUnshelving": "确定执行下架作业吗?", + "removeLotNo": "确定移除此笔 Lot No『{lotNo}』吗?", + "removeMaterialBatchNumber": "确定移除此笔 料件批号『{MaterialBatchNumber}』吗?", + "confirmLoading": "是否确定上料至『{newResource}』?", + "confirmDeletionOfReturnOrderDetail": "是否删除此笔退料单明细" + }, + "finishedGoodsWarehouse": "成品仓", + "finishedGoodsWarehouseShelving": "成品仓上架作业", + "finishedGoodsWarehouseUnshelving": "成品仓下架作业", + "finishedGoodsInTemporaryWarehouse": "成品暂存仓", + "finishedGoodsInTemporaryWarehouseShelving": "成品暂存仓上架作业", + "finishedGoodsInTemporaryUnshelving": "成品暂存仓下架作业", + "lineSideWarehouseShelving": "线边仓上架作业", + "lineSideWarehouseUnshelving": "线边仓下架作业", + "lineSideWarehouseBatchOperation": "线边仓分批次工作", + "materialWarehouse": "原料仓", + "materialWarehouseShelving": "原料仓上架作业", + "materialWarehouseUnshelving": "原料仓下架作业", + "equipmentLoading": "设备上料", + "rawMaterialUnpacking": "原料拆包作业", + "minimumPackingNumber": "最小包装数", + "unpackingSuccess": "拆包成功", + "enterMinimumPackagingNumber": "请输入最小包装数", + "tableObj": { + "lotNo": "Lot No", + "warehouseQty": "库存数量", + "warehouseTotalQty": "总库存数量", + "transferOutWarehouse": "转出仓库", + "transferOutStorageNo": "转出储位", + "transferInWarehouse": "转入仓库", + "transferInStorageNo": "转入储位", + "rackNo": "货架编号", + "rack": "货架", + "locationNo": "货位", + "kind": "仓库类型", + "batchNumberPrinciple": "批号原则", + "batchingPrinciple": "分批原则" + }, + "validation": { + "numberGreaterThanZero": "下料数量必须大于0" + }, + "alreadyListed": "已上架", + "notListed": "未上架", + "putOnShelf": "上架", + "takeOffShelf": "下架", + "numberOfEntries": "笔数", + "errors": { + "rackNumberEmpty": "Lot No『{lotNo}』的货架编号不可为空", + "locationNumberEmpty": "Lot No『{lotNo}』的货位不可为空", + "storageNumberEmpty": "Lot No『{lotNo}』的储位不可为空" + }, + "loadingTime": "上料时间", + "feeding": "上料", + "originalWarehouseNumber": "原仓库编号", + "originalRackNoNumber": "原货架编号", + "originalLocation": "原货位", + "originalStorage": "原储位", + "unloadMaterial": "下料", + "warehouse": "仓库", + "supplierBatch": "供应商批号", + "dateExp": "到期日", + "creator": "建立人员", + "quantityBeforeUnpacking": "拆包前数量", + "quantityAfterUnpacking": "拆包后数量", + "returnMaterialOrderNumber": "退料单号", + "returnQuantity": "退料数量", + "staffNumber": "人员编号", + "receivingDetailConfirmation": "收料明细-确认", + "receivingDetailAttachment": "收料明细-附件", + "receivingDetailAdd": "收料明细-新增", + "samplingPlan": "抽样计划", + "specialProcurement": "特採", + "exemptFromInspection": "免验", + "receivingStaff": "收料人员", + "receivingTime": "收料时间", + "warehousing": "入库", + "qualified": "合格", + "uninspected": "未检验", + "specialProcurementDescription": "特采说明", + "confirmPerson": "确认人员", + "confirmTime": "确认时间", + "shouldDrawNumber": "应抽数", + "okNumber": "OK数", + "ngNumber": "NG数", + "isSpecialProcurement": "是否特采", + "inspectionTime": "检验时间", + "shouldDrawNumberMustBeGreaterThanZero": "应抽数必须大于0", + "allowableReturnNumberMustBeGreaterThanZero": "允退数必须大于0", + "inspectionQuantityDoesNotMatchSamplingQuantity": "检验数量不符抽样数量", + "inspectionWorkNotCompleted": "检验作业未完成", + "specialProcurementDescriptionCannotBeEmpty": "特采说明不可为空", + "milStd105ETable": "MIL-STD-105E表", + "editDetails": "编辑明细", + "createReceivingItem": "请建立收料项次", + "allItemsInReceivingOrderExemptFromInspection": "收料单中项次均为免验, 收货后不得作废收料单, 是否确定收货?", + "isPurchaseOrderNumberSureToBeVoided": "採购单号{purchaseNo}是否确定作废", + "damageQuantity": "破坏数量", + "retentionQuantity": "留样数量", + "purchaseQuantity": "採购数量", + "receivedMaterialQuantity": "已收料数量", + "receivingOrderDetailEdit": "收料单明细-编辑", + "receivingOrderDetailNew": "收料单明细-新增", + "receivingOrderAdd": "收料单-新增", + "receivingQuantityCannotBeEmpty": "收料数量不可为空", + "numberOfEntriesMustBeGreaterThanZero": "笔数需大于0", + "itemNumber": "料件编号{item}", + "returnableStockQuantity": "可退库数量", + "returnStockQuantity": "退库数量", + "rawMaterialWarehouseReturn": "原料仓退回", + "defectiveGoodsWarehouseReturn": "不良品仓退回", + "returnOrderAdd": "退库单-新增", + "returnOrderEdit": "退库单-编辑", + "createReturnDetail": "请建立退库明细", + "executeReturnOrderConfirmation": "是否要执行退库单确认?", + "deleteReturnOrder": "是否删除退库单『 {returnNo} 』?", + "returnType": "退库类型", + "returnOrderDetail": "退库单明细", + "returnOrderDetailAdd": "退库单明细-新增", + "enterReturnQuantityForItem": "请输入序号『{index}』，料件批号『{materialLot}』的退库数量", + "returnQuantityForItemMustBeGreaterThanZero": "序号『{index}』，料件批号『{materialLot}』的退库数量必须大于0", + "materialLotAndStorageNoDuplicate": "料件批号『{materialLot}』，储位『{storageNo}』重複，请合併为一笔", + "returnOrderSavedSuccessfully": "退库单储存成功", + "areYouSureToDeleteThisReturnDetail": "是否删除此笔退库明细?", + "issueOrderAdd": "发料单-新增", + "issueOrderDetailEdit": "发料单明细-编辑", + "issueOrderDetailAdd": "发料单明细-新增", + "createIssueDetail": "请建立发料明细", + "executeIssueOrderConfirmation": "是否要执行发料单确认?", + "deleteIssueOrder": "是否删除发料单『 {issueNo} 』?", + "issueQuantity": "发料数量", + "issueOrderNumber": "发料单号", + "mtlIssueOrderNo": "发料单号", + "availableIssueQuantity": "可发料数量", + "enterIssueQuantityForItem": "请输入序号『{index}』，料件批号『{materialLot}』的发料数量", + "issueQuantityForItemMustBeGreaterThanZero": "序号『{index}』，料件批号『{materialLot}』的发料数量必须大于0", + "enterTransferInWarehouseForItem": "请输入序号『{index}』，料件批号『{materialLot}』的转入仓库", + "transferInWarehouseForItemCannotEqualTransferOut": "序号『{index}』，料件批号『{materialLot}』的转入仓库不可等于转出仓库", + "enterIssueWorkOrderForItem": "请输入序号『{index}』，料件批号『{materialLot}』的发料工单", + "areYouSureToDeleteThisIssueDetail": "是否删除此笔发料明细?", + "inventoryOrderNumber": "盘点单号", + "inventoryType": "盘点类型", + "login": "登录", + "inventoryInProgress": "盘点中", + "initialCountQuantity": "初盘数量", + "recountQuantity": "複盘数量", + "inventoryShortage": "盘亏", + "inventoryPlan": "盘点计划", + "executionDate": "执行日期", + "initialCountDate": "初盘日期", + "voidDate": "作废日期", + "initialCountPersonnel": "初盘人员", + "voidPersonnel": "作废人员", + "recountDate": "複盘日期", + "recountPersonnel": "複盘人员", + "plannedDate": "计划日期", + "createInventoryOrderDetail": "请建立盘点单明细", + "executeInventoryOrderConfirmation": "是否要执行盘点单确认?", + "executeInventoryOrderVoid": "是否要执行盘点单作废?", + "executeInventoryOrderDeletion": "是否要执行盘点单删除?", + "inventoryOrderCompletionWillAdjustStock": "盘点单完成会依盘点盈亏自动调整库存，是否要执行盘点单完成?", + "inventoryCompleted": "盘点完成", + "initialCountNotConfirmedCannotComplete": "初盘尚未确定，不可执行完成", + "recountNotConfirmedCannotComplete": "複盘尚未确定，不可执行完成", + "plannedStartDateCannotExceedEndDate": "计划日期(起)不可大于计划日期(迄)", + "plannedDateRangeCannotExceed30Days": "计划日期区间不可大于30天", + "selectMaterialLotNumber": "挑选料件批号", + "pleaseCheckMaterialLotNumber": "请勾选料件批号", + "inventoryConfirmation": "盘点确定", + "inventoryDetails": "盘点明细", + "inventoryRegistration": "盘点登录", + "noMaterialLotNumberInWarehouse": "仓库『{invNo}』无此料件批号", + "initialCount": "初盘", + "recount": "複盘", + "confirmNoMoreInputOfQuantity": "确定后不可再输入{msg}数量，是否要执行盘点确认?", + "inventoryDetailSavedSuccessfully": "盘点明细储存成功", + "areYouSureToDeleteThisInventoryDetail": "是否删除此笔盘点明细?", + "initialCountQuantityCannotBeEmpty": "序号『{seq}』，初盘数量不可为空", + "planDateFormatError": "计划日期格式错误", + "planDateCannotBeEarlierThanCurrentDate": "计划日期不可小于当前日期", + "inventoryPlanSavedSuccessfully": "盘点计划储存成功", + "transferOrderNumber": "调拨单号", + "deleteTransferOrder": "是否删除调拨单『 {transferNo} 』?", + "executeTransferOrderConfirmation": "是否要执行调拨单确认?", + "transferQuantity": "调拨数量", + "availableTransferQuantity": "可调拨数量", + "transferOrderAdd": "调拨单-新增", + "transferOrderEdit": "调拨单-编辑", + "materialLotStorageInvDuplicate": "料件批号『{materialLot}』，储位『{storageNo}』，转入仓库『{invNo}』重複，请合併为一笔", + "pleaseSelectTransferOrderDetail": "请选择调拨单明细", + "transferQuantityExceedsAvailable": "料件批号『{materialLot}』的调拨数量超过可调拨数量", + "enterTransferQuantityForItem": "请输入序号『{index}』，料件批号『{materialLot}』的调拨数量", + "transferQuantityForItemMustBeGreaterThanZero": "序号『{index}』，料件批号『{materialLot}』的调拨数量必须大于0", + "areYouSureToDeleteThisTransferDetail": "是否删除此笔调拨明细?", + "feedingWarehouseNumber": "下料仓库编号", + "feedingStorageLocation": "下料储位", + "feedingQuantity": "下料数量", + "invType": { + "0": "立库", + "1": "平库" + } } diff --git a/src/locale/i18n/zh/mes/wmst.json b/src/locale/i18n/zh/mes/wmst.json index 0c07a92..c75b705 100755 --- a/src/locale/i18n/zh/mes/wmst.json +++ b/src/locale/i18n/zh/mes/wmst.json @@ -56,7 +56,7 @@ "shipOrderShippingSuccess": "出货单出货成功", "confirmPackListInSearch": "包装清单[ {packNo} ]不在检索清单中，请确认！", "itemReceiptDetail": "收料明细", - "samplePlan": "抽样计画", + "samplePlan": "抽样计划", "qtyDieMustMoreThan0": "Die数必须大于0", "inputKeyFrontFour": "请输入{checkKey}前四码", "BINDistribution": "BIN分佈", @@ -128,4 +128,4 @@ "checkNeedTransferPartNo": "请勾选需转移的片号", "allPartNoNeedIndicateUserLot": "所有片号均需指定客户批号", "checkRequiredReturnPartNo": "请勾选需退料的片号" -} \ No newline at end of file +} diff --git a/src/locale/i18n/zh/tqm/index.json b/src/locale/i18n/zh/tqm/index.json index ea7b685..09a9b93 100755 --- a/src/locale/i18n/zh/tqm/index.json +++ b/src/locale/i18n/zh/tqm/index.json @@ -88,9 +88,9 @@ "testDieAmount": "测试Die数", "programNo": "编号", "dispatchQuantity": "派工数量", - "plannedCompletionTime": "计画完成时间", + "plannedCompletionTime": "计划完成时间", "enterDispatchQuantity": "请输入派工数量", - "planStartTime": "计画开始时间", + "planStartTime": "计划开始时间", "modificationSuccessful": "修改成功", "toolNumber": "工具编号", "toolCategoryDescription": "工具类别说明", @@ -175,8 +175,8 @@ "invalidateAfterSplitBatch": "分併批后失效", "period": "週期", "inspecType": "检验类型", - "qcPlan": "检验计画编号", - "qcPlanDesc": "检验计画说明", + "qcPlan": "检验计划编号", + "qcPlanDesc": "检验计划说明", "qcItem": "检验项目编号", "qcRole": "检验人员群组", "ncCode": "不合格代码", @@ -189,7 +189,7 @@ "inspection": "检验", "inspectionItemDescription": "检验项目说明", "samplingMethod": "抽样方式", - "inspectionPlan": "检验计画", + "inspectionPlan": "检验计划", "createNew": "新建", "inOperation": "作业中", "closed": "已关闭", @@ -291,9 +291,9 @@ "splitInvalid": "失效（分批）", "ruleState": "请选择状态", "personnel": "人员", - "planStartDate": "计画开始日期", + "planStartDate": "计划开始日期", "qtyReleased": "已下达数量", - "planEndDate": "计画结束日期", + "planEndDate": "计划结束日期", "standardNumber": "标准数", "unitQty": "单位量", "hold": "保留", diff --git a/src/locale/i18n/zh/tqm/prd.json b/src/locale/i18n/zh/tqm/prd.json index 4e946b9..f1924f5 100755 --- a/src/locale/i18n/zh/tqm/prd.json +++ b/src/locale/i18n/zh/tqm/prd.json @@ -1,475 +1,475 @@ { - "BOMNo": "BOM编号", - "currentRevision": "目前版本", - "unitConsume": "单位耗用量", - "unitPrdAmount": "单位生产数", - "confirmDelItemList": "是否确认删除物料清单{bom}/{bomType}/{revision}", - "itemOperationDuplicate": "料件编号:{component} 投料点:{operation}重複", - "BOMMaintainItemDetail": "BOM必须维护料件明细", - "item": "料件", - "itemTypeDesc": "料件类别说明", - "selectWorkGroup": "请选择班组", - "selectUserWorkShiftNo": "请选择班製编号", - "nextMonth": "下月份", - "nextYear": "下年度", - "cannotModifyPastCalendars": "不可修改当日(包含当日)之前的班组日历", - "confirmCoverageWorkGroupCalendarInfo": "当前班组在{rangeText}已经有设定值，是否进行复盖", - "userWorkShift": "班製", - "userWorkShiftNo": "班製编号", - "userWorkShiftDesc": "班製说明", - "userWorkShiftNoExist": "班製编号: {userWorkShift}已存在", - "confirmDelUserWorkShift": "是否确认删除班製: {userWorkShift}", - "workPosition": "职级", - "workGroup": "班组编号", - "workGroupDesc": "班组说明", - "workGroupUser": "班组人员", - "workGroupType": "班组类型", - "workGroupTypeNo": "班组类型编号", - "workGroupTypeDesc": "班组类型说明", - "enterWorkGroupTypeNo": "请输入班组类型编号", - "confirmDelWorkGroupType": "是否确认删除班组类型: {workGroupType}", - "shippingLocation": "出货地点", - "shippingPlace": "出货地", - "country": "国家", - "address": "地址", - "user": "客户", - "userNoRequired": "客户编号不可为空", - "userNoExist": "客户编号: {customerNo}已存在", - "confirmDelUser": "是否确认删除客户: {customerNo}", - "inspLevel": "检验等级", - "confirmSelectInspPlanDel": "请选择要删除的检验计画", - "confirmSelectSupplierDel": "请选择要删除的供应商", - "itemMaterialMaintain": "料件维护", - "inspLevelNotSetMultiple": "检验等级『{str}』不可设定多个检验计画", - "confirmDelItemMaterialNo": "是否确认删除料件编号: {item}", - "contactPerson": "联络人", - "itemTypeExist": "料件类别: {typeNo}已存在", - "confirmDelItemType": "是否确认删除料件类别: {typeNo}", - "actionTiming": "作用时机", - "ruleLogic": "法则逻辑", - "rule": "法则", - "dispose": "处置", - "variable": "变数", - "operator": "运算子", - "checkValue": "判断值", - "startOp": "开始工序", - "exitOpTime": "出站时间", - "endOp": "结束工序", - "messaeRouter": "讯息 / 路径", - "controlRuleConfig": "管制法则配置", - "ruleLogicSetting": "法则逻辑设定", - "confirmRuleNoDel": "法则编号{ruleNo},是否确认删除", - "confirmRuleDel": "法则{rule},是否确认删除", - "confirmInOrderDuplicate": "顺序{seq}重複, 请确认", - "startOpIndicateTime": "开始工序的指定时间", - "endOpIndicateTime": "结束工序的指定时间", - "msgNotEmpty": "讯息不可为空", - "alarmCodeNotEmpty": "报警编号不可为空", - "routerNotEmpty": "路径不可为空", - "startOpEndOpDataNotEqual": "开始工序与结束工序所设定的资料不可完全相同", - "segmentNo": "工段编号", - "eventNo": "事件编号", - "eventName": "事件名称", - "eventDesc": "事件说明", - "severity": "严重度", - "duty": "责任", - "nonConformingGroup": "不合格群组", - "usableNonConformingGroup": "可用不合格群组", - "indicatedNonConformingGroup": "已指派不合格群组", - "selfDuty": "自责", - "otherDuty": "他责", - "nonConformanceCodeExist": "不合格代码: {ncCode}已存在", - "confirmDelNonComformingCode": "是否确认删除不合格代码: {ncCode}", - "usableNonConformingCode": "可用不合格代码", - "indicatedNonConformingCode": "已指派不合格代码", - "operationConfig": "工序配置", - "nonConformanceGroupExist": "不合格群组: {ncGroup}已存在", - "confirmDelNCGroup": "是否确认删除不合格群组: {ncGroup}", - "operationType": "工序类型", - "usableResrce": "可用设备", - "indicatedResrce": "已指派设备", - "usableItemType": "可用料件类别", - "indicatedItemType": "已指派料件类别", - "operationDataField": "工序主资料", - "confirmDelOperation": "是否确认删除ID为{operation}", - "operationExist": "工序: {operation}已存在", - "paramType": "参数类型", - "default": "默认", - "dataType": "型别", - "dataListSrc": "资料表来源", - "textSrc": "栏位来源", - "textDescSrc": "栏位说明来源", - "otherRequirement": "其他条件", - "dataList": "资料表", - "paramDataFields": "参数主资料", - "confirmDelParamNo": "是否确认删除参数编号: {parameterNo}", - "paramNoExist": "参数编号: {parameterNo}已存在", - "PDCNo": "PDC编号", - "PDCDataFields": "PDC主资料", - "confirmDelPDCNo": "是否确认删除PDC编号: {pdcNo}", - "selectParamForDel": "请选择要删除的参数", - "approve": "批准", - "release": "解签", - "approved": "已核准", - "notApproved": "未核准", - "operationForSegment": "工段对应的工序", - "inputKeywordForFilter": "输入关键字进行过滤", - "infoConfigForOperation": "工序相关资讯配置", - "operationDesc": "作业说明", - "controlRule": "管制法则", - "mapOffset": "Map偏移量", - "paramValue": "参数值", - "controlRuleNo": "管制法则编号", - "resrceAndFormula": "设备类别『{typeNo}』及主配方『{testProgramNo}』", - "toolCategoryAndType": "工具大类『{categoryNo}』,工具类别『{typeNo}』", - "notSetDuplicate": "不可重複设定", - "selectLimitResrce": "挑选限制的设备", - "selectSpareFormula": "挑选备用配方", - "doSearchFirst": "请先执行检索", - "itemRevisionApproveNotDel": "『{item}』、『{revision}』已核准,不得删除工段或工序", - "segmentNoOrOperationNo": "必须选择工段编号或工序编号", - "confirmDelOperation2": "是否确认删除工序: {treeOperation}", - "itemRevisionNotApproveByOperationNotSet": "{item} 、{revision}未设定工序,不得批准", - "itemRevisionNotApproveByMsgNotSet": "{item} 、{revision}未设定主要讯息,不得批准", - "confirmApprovePrdConfig": "是否核准『{item}』、『{revision}』的产品配置", - "approveSuccess": "核准成功", - "confirmDismissApproval": "是否确定对『{item}』、『{revision}』解除批准?", - "dismissSuccess": "解签成功", - "itemRevisionApprovedNotDel": "『{item}』、『{revision}』已核准,不得删除", - "confirmDelPrdConfig": "是否确认删除『{item}』、『{revision}』的产品配置", - "limitResrce": "限制设备", - "sourceMaterialNo": "来源料件编号", - "targetMaterialNo": "目标料件编号", - "targetRevision": "目标版本", - "targetExistApprovedNotCopy": "目标料件编号{newItem},版本{newRevision}已存在产品配置作业且状态为已核准,不可执行複製", - "confirmItemPrdParamConfigCover": "目标料件有配置产品生产参数,是否复盖?", - "copyComp": "複製完成", - "selectCategory": "请选择大类", - "selectType": "请选择类别", - "limitType": "限制类型", - "seqLimitedResrceNotEmpty": "序号{seq}的限制设备不可为空", - "formulaDesc": "配方说明", - "spareFormula": "备用配方", - "standardBatchAmount": "标准批量", - "orderSeq": "顺序「{el.seq}」", - "xYNotDuplicate": "X与Y不可重複", - "percent": "百分比", - "string": "字串", - "PDCDesc": "PDC说明", - "specCenter": "规格中心", - "prdConfigPDCParam": "产品配置作业-PDC参数", - "PDCPageSeqResrceNotEmpty": "PDC页签中，序号{seq}的设备类别不可为空", - "PDCPageSeqPDCNoNotEmpty": "PDC页签中，序号{seq}的PDC编号不可为空", - "PDCPageResrceTypeNotDuplicate": "PDC页签设备类别「{typeNo}」不可重複", - "paramNoMsg": "参数编号「{parameterNo}」", - "paramNoRule": "参数编号「{parameterNo}」不符合规格上限>规格下限", - "specificationCannotBeEmpty": "规格不可为空", - "RecipeNo": "Recipe编号", - "RecipeDesc": "Recipe说明", - "RecipeReversion": "Recipe版本", - "prdConfigRecipeParam": "产品配置作业-Recipe参数", - "pageRECIPESeqResrceTypeNotEmpty": "配方页签中，序号{seq}的设备类别不可为空", - "pageRECIPESeqRecipeNoNotEmpty": "配方页签中，序号{seq}的Recipe编号不可为空", - "pageRECIPESeqRecipeNoParamNotEmpty": "配方页签中，序号{seq}的Recipe编号的参数值不可为空", - "pageRECIPESeqRecipeNoHighLimitNotEmpty": "配方页签中，序号{seq}的Recipe编号的规格上限不可为空", - "pageRECIPESeqRecipeNoLowLimitNotEmpty": "配方页签中，序号{seq}的Recipe编号的规格下限不可为空", - "pageRECIPESeqRecipeNoSpecCenterNotEmpty": "配方页签中，序号{seq}的Recipe编号的规格中心不可为空", - "pageRECIPEResrceTypeNotDupilcate": "配方页签中设备类别「{typeNo}」不可重複", - "confirmDelReasonCode": "是否确认删除原因代码： {reasonCode}", - "paramNoDesc": "参数编号说明", - "selectParamNoForDel": "请选择要删除的参数编号", - "RecipeDataConfig": "Recipe主资料配置", - "RecipeDataFields": "Recipe主资料", - "paramItemNotEmpty": "参数清单不可为空", - "confirmDelRecipeNo": "是否确认删除Recipe编号: {recipeNo}", - "copySuccess": "複製成功", - "confirmSegmentChangedDelRouter": "工段已变更，已绘製的途程将删除，是否确定？", - "confirmDelRouter": "是否确认删除途程: {router}/{revision}", - "segmentDataFields": "工段主资料", - "orderShouldPositiveInt": "顺序应为正整数", - "segmentExist": "工段: {segmentNo}已存在", - "confirmDelSegment": "是否确认删除工段: {segmentNo}", - "confirmDelSupplierNo": "是否确定删除供应商编号{supplierNo}", - "phone": "电话", - "routerDraw": "途程-绘製", - "batchRule": "併批规则", - "specialUserBatchNo": "特批客户批号", - "setter": "设定人", - "batchRuleOrderCustom": "併批规则-工单自订", - "selectDelRow": "请先选择要删除的行", - "confirmSeqRemove": "序号{selectedSeqs}，确定要移除该笔资料吗?", - "seqInputSettingValueNRequired": "序号{missingValues}必须输入设定值(N)", - "uncheckCustomDataField": "未勾选相同工单自订的资料栏位", - "seqUserBatchNotEmpty": "序号{emptyLots}的客户批号不可为空", - "seqUserLotDuplicate": "序号{duplicateSeq}，客户批号重複", - "confirmNotSaveChange": "资料已异动且尚未保存，确定要取消此次异动吗?", - "equalPO": "同 PO", - "equalDateCode": "同 DateCode", - "differentPrdBatchNotOverN": "DateCode 不相同的生产批不超过(N)个", - "differenceNotOverWeekN": "DateCode 的差距不超过(N)周", - "equalUserLot": "同客户批号", - "differentUserLotNotOverN": "客户批号不相同的生产批不超过(N)个", - "equalTestingProgramRevision": "相同测试程式与版次", - "sameOrderCcstom": "相同工单自订", - "valid": "有效", - "EQURuleNo": "EQC规则编号", - "sampleRuleNo": "抽样规则编号", - "maxNumber": "最大几个", - "BINNo": "BIN编号", - "indicateBIN": "指定BIN", - "indicateCAT": "指定CAT", - "electricTestingRule": "电性抽测规则", - "confirmDelRuleNo": "是否确认删除{eqcRuleNo}", - "checkBIN": "请勾选BIN", - "sampleMethodMaxBINNotEmpty": "抽样方式为最大N个BIN时，最大几个不能为空", - "selectOneRow": "请先选择一行", - "allGoodCatNumber": "所有Good CAT数", - "indicateSingleCAT": "指定单一CAT", - "indicateMultipleCAT": "指定多个CAT", - "maximumSingleCAT": "最大一个CAT", - "maximumNCAT": "最大N个CAT", - "indicateRepleMultipleCAT": "指定多个CAT顺序补足", - "others": "其他", - "sampleType": "抽样类型", - "FTAutoSplitRule": "FT自动分批规则", - "splitRule": "分批规则", - "transferMethod": "转移方式", - "batchNo": "批号", - "keepOrigin": "沿用原始", - "prdNewNo": "产生新号", - "inputDirect": "直接输入", - "add": "加上", - "subtract": "减去", - "code": "码+", - "applyBIN": "套用BIN", - "applyCAT": "套用CAT", - "selectRouterNo": "请先选择途程编号", - "FTSplichRule": "FT分批规则", - "confirmDelItemSeq": "是否确认删除项次为{seq}", - "transferMethod2": "移转方式", - "itemNoChangeLogicNewNotEmpty": "产品编号变更逻辑为产生新号，料件编号不可为空", - "userPartChangeLogic": "客户料号变更逻辑为产生新号，客户料号不可为空", - "userLotChangeLogic": "客户批号变更逻辑为产生新号，请选择变更方式", - "inputFieldsNotEmpty": "直接输入输入值栏位不可为空", - "addingFieldNotEmpty": "加入输入值栏位不可为空", - "haltCodeOrInputFieldsNotEmpty": "保留码数或输入值栏位不可为空", - "haltCodePositiveInt": "保留码数必需为正整数", - "subtractCodeOrInputNotEmpty": "减去码数或输入值栏位不可为空", - "subtractCodePositiveInt": "减去码数必需为正整数", - "itemNoPositiveInt": "项次必需为正整数", - "leastCheckOneBIN": "至少勾选一个BIN", - "itemNotDuplicate": "项次不可重複", - "productCodeNotEmpty": "产品编号不能为空", - "splitNoRule": "分批编号规则", - "singleTest": "单次测试数", - "singleTestSecond": "单次测试秒数", - "singleTestPositiveInt": "单次测试数数应为正整数", - "ruleSingleTestSecond": "单次测试秒仅可输入大于0的数值，小数点允许2位", - "seqBINNoNotEmpty": "序号{seq}，BIN编号不可为空", - "seqResultNotEmpty": "序号{seq}，结果不可为空", - "CPTestProgram": "CP测试程式", - "FTTestProgram": "FT测试程式", - "insertNewItem": "插入新项", - "removeAll": "移除全部", - "fieldLabel": "栏位标籤", - "mandatory": "必须", - "enterCategory": "请输入类别", - "cannotRemoveDisabledRow": "不能移除已禁用行", - "noItemsToRemove": "没有要移除的项", - "confirmDeleteCustomData": "是否确认删除自订资料 {tableName}", - "numberType": "编号类型", - "orderType": "订单类型", - "definitionMethod": "定义方式", - "defineByContainer": "按容器定义", - "skipSequence": "跳过序列", - "prefix": "首码", - "suffix": "尾码", - "baseNumber": "基数", - "sequenceLength": "序列长度", - "maximumSequence": "最大序列", - "minimumSequence": "最小序列", - "increment": "增量", - "currentSequence": "当前序列", - "resetSequenceNumber": "重置序号", - "commitImmediately": "立即提交", - "numberingRuleExample": "编号规则示例", - "enterOrSelectNumberType": "请输入或选择编号类型", - "enterBaseNumber": "请输入基数", - "maxLength128Characters": "最大长度为128字元", - "enterCurrentSequence": "请输入当前序列", - "materialGroup": "物料组", - "noData": "没有资料", - "searchBeforeDeleting": "请先检索之后再删除", - "never": "从不", - "always": "总是", - "daily": "每天", - "weekly": "每週", - "monthly": "每月", - "yearly": "每年", - "weeklySunday": "每週 - 星期日", - "weeklyMonday": "每週 - 星期一", - "weeklyTuesday": "每週 - 星期二", - "weeklyWednesday": "每週 - 星期三", - "weeklyThursday": "每週 - 星期四", - "weeklyFriday": "每週 - 星期五", - "weeklySaturday": "每週 - 星期六", - "carrierTypeDesc": "载具类型说明", - "enterCarrierType": "请输入载具类型", - "enterCarrier": "请输入载具编号", - "layoutColumns": "栏数", - "layoutRows": "列数", - "layoutCapacity": "最大容量", - "layoutMapping": "载具位置图", - "layoutType": "载具位置类型", - "containerType0": "不需要位置", - "containerType1": "单栏排列", - "containerType2": "矩阵排列", - "mappingNo": "位置编码", - "carrierTypeExist": "载具类型: {carrierType}已存在", - "carrierExist": "载具编号: {carrier}已存在", - "confirmDelCarrierType": "是否确认删除载具类型: {carrierType}", - "confirmDelCarrier": "是否确认删除载具编号: {carrier}", - "carrierMemberActive": "载具作业", - "carrierBind": "绑定", - "carrierUnBind": "解绑", - "operationType2": "操作类型", - "carrierNumber": "载具数量", - "carrierTypeBo": "载具类型BO", - "status1": "使用中", - "status2": "闲置", - "automaticGeneration": "自动生成", - "lotNo": "Lot No", - "currentLoadQty": "当前装载数量", - "positionLabel": "位置标签", - "position": "位置", - "batchCreation": "批量创建", - "confirmDelWorkGroupNo": "是否确认删除该班组编号：{workGroup}", - "startLineInspectionNumber": "开线检编号", - "lineInspectionConfiguration": "开线检配置", - "addLineInspectionConfiguration": "开线检配置-新增", - "viewLineInspectionConfiguration": "开线检配置-查看", - "editLineInspectionConfiguration": "开线检配置-编辑", - "checkItem": "检查项目", - "processOrProductionLine": "工序/产线", - "availableProductionLines": "可用产线", - "assignedProductionLines": "已指派产线", - "customData": "自定资料", - "deactivate": "停用", - "confirmDeletionOfLineInspectionId": "是否确认删除开线检编号 {id}", - "keyCannotBeEmpty": "{key}不能为空", - "processStep": "工步", - "selectProcessStepToDelete": "请选择要删除的工步", - "action": "动作", - "feeding": "投料", - "issueCommand": "下指令", - "systemIntegration": "系统对接", - "feedingOpen": "投料开启", - "issueCommandWaitForResponseOpen": "下指令 - 等待回应", - "issueCommandNoWaitForResponseOpen": "下指令 - 不等回应", - "alarmOpen": "Alarm 开启", - "systemIntegrationOpen": "系统对接开启", - "actionContent": "动作内容", - "processStepFeedingContent": "工步-投料内容", - "processStepIssueCommandContent": "工步-下指令内容", - "processStepAlarmContent": "工步-Alarm内容", - "processStepSystemIntegrationContent": "工步-系统对接内容", - "processStepParameters": "工步-参数", - "systemName": "系统名称", - "materialCannotBeEmpty": "物料不可为空", - "standardNumberCannotBeEmpty": "标准数不可为空", - "unitQuantityCannotBeEmpty": "单位量不可为空", - "commandIDCannotBeEmpty": "commandID 不可为空", - "eventIDCannotBeEmpty": "Event ID 不可为空", - "systemNameCannotBeEmpty": "系统名称不可为空", - "messageIDCannotBeEmpty": "Message ID 不可为空", - "processStepListCannotBeEmpty": "工步清单不可为空", - "enterProcessStep": "请输入工步", - "selectAction": "请选择动作", - "enterProcessStepActionContent": "请输入工步 {step} 动作 {action} 的动作内容", - "parameterLimitsCannotBeEmpty": "序号 {seq} 参数编号「{parameterNo}」的规格上下限不可为空", - "parameterDoesNotMeetLimits": "序号 {seq} 参数编号「{parameterNo}」不符合规格上限 > 规格下限", - "parameterValueCannotBeEmpty": "序号 {seq} 参数编号「{parameterNo}」的参数值不可为空", - "confirmDeletionOfSelectedRows": "是否确认删除选中的行", - "unbindAllConfirm": "确定解除所有绑定？", - "enterRecipeNumber": "请输入Recipe编号", - "enterVersion": "请输入版本", - "selectType2": "请选择类型", - "enterStandardNumber": "请输入标准数", - "numericInputOnly": "只能输入数值", - "standardNumberMustBeGreaterThanZero": "标准数必须大于零", - "stadQuantityAllowsUpToSixDecimals": "标准数最多允许六位小数", - "enterUnitQuantity": "请输入单位量", - "unitQuantityMustBeGreaterThanZero": "单位量必须大于零", - "unitQuantityAllowsUpToSixDecimals": "单位量最多允许六位小数", - "parameterNumberDuplicated": "参数编号 {parameterNo} 在序号 {duplicatedSeqs} 中重複设定", - "typeNoDuplicated": "设备类别 {typeNo} 在序号 {seq} 中重複设定", - "parameterNumberCannotBeEmpty": "参数编号不可为空", - "specLimitsCannotBeEmpty": "配方页籤，顺序 {seq} Recipe编号 {recipeNo} 的参数编号 {parameterNo} 规格上下限不可为空", - "typeNoParameterValueCannotBeEmpty": "配方页籤，顺序 {seq} Recipe编号 {recipeNo} 的参数编号 {parameterNo} 参数值不可为空", - "carrierPositionDuplicate": "载具位置{No}不可重複", - "workCenterNumber": "工作中心编号", - "mixingLinesAllowed": "是否可混线", - "workCenterCannotBeEmpty": "序号 {seq} 产线编号不可为空", - "workCenterCannotBeDuplicated": "产线编号 {workCenter} 不可重復", - "targetSourceMaterialVersionCannotBeSame": "目标料件编号/版本不可与来源料件编号/版本相同", - "resrceStatus": "设备状态", - "toolStatus": "工具状态", - "rework": "重工", - "subProcess": "子流程", - "tempProcess": "临时流程", - "prd": "製造", - "purchase": "采购", - "overZero": "须大于0", - "carrierSaveSuccessAndPrint": "载具新增成功，是否打印标籤?", - "capacityNotEnough": "载具『{carrier}』容量不足，无法装载", - "positionNotEnough": "载具『{carrier}』位置不足，无法装载", - "overSingleSelected": "请选择一个装载位置", - "positionLotLoaded": "载具位置『{position}』已有摆放LOT，请先移除LOT", - "selectLotDelete": "请先选择要删除的LOT", - "confirmRemoveAll": "是否清空载具上的所有LOT", - "confirmCancel": "是否取消此次变更", - "inputLotNo": "请输入Lot No", - "virtualItem": "虚拟料件编号", - "virtualItemRepeat": "料件明细已有此虚拟料件编号「{item}」，不可重复配置", - "virtualItemExist": "当前物料清单中不存在虚拟料件编号「{item}」", - "virtualItemBind": "虚拟料件「{item}」已被其他料件绑定，不允许删除", - "router": { - "error1": "工艺路线已在使用中，无法删除链接", - "error2": "不能连接自己", - "error3": "不能重复连线", - "error4": "不能回环", - "error5": "工艺路线已在使用中，无法新增节点", - "error6": "请把节点拖入到画布中", - "error7": "开始节点不能重复添加", - "error8": "结束节点不能重复添加", - "error9": "工艺路线已在使用中，无法删除节点", - "error10": "必须有一个开始节点", - "error11": "必须有一个结束节点", - "error12": "途程节点【{node}】步骤不能为空", - "error13": "节点【{node}】步骤【{step}】不可重复", - "error14": "途程节点连接不能为空", - "error15": "途程类型为『维修』，途程上仅可有一个维修工序", - "confirm1": "确定删除所点击的线吗?", - "confirm2": "确定要删除节点[{node}]?", - "success1": "连线成功" - }, - "sequenceDeviceCategoryPdcParameterValueNotMaintained": "PDC参数值未维护，不允许保存", - "startNode": "开始节点", - "otherSteps": "其它步骤", - "reworkProcess": "重工流程", - "nodeInformation": "节点信息", - "erpSteps": "ERP步骤", - "connectionInformation": "连线信息", - "script": "脚本", - "processDataInformation": "流程数据信息", - "processRouteInformation": "工艺路线信息", - "reservedIdentifier": "保留标识", - "processRouteType": "工艺路线类型", - "enterProcessRoute": "请输入工艺路线", - "selectProcessRouteType": "请选择工艺路线类型", - "returnToOriginalState": "返回（原始状态）", - "returnToAny": "返回（任意）", - "returnToPrevious": "返回（上一个）", - "returnToAnyPrevious": "返回（任意上一个）", - "returnToNext": "返回（下一个）" -} \ No newline at end of file + "BOMNo": "BOM编号", + "currentRevision": "目前版本", + "unitConsume": "单位耗用量", + "unitPrdAmount": "单位生产数", + "confirmDelItemList": "是否确认删除物料清单{bom}/{bomType}/{revision}", + "itemOperationDuplicate": "料件编号:{component} 投料点:{operation}重複", + "BOMMaintainItemDetail": "BOM必须维护料件明细", + "item": "料件", + "itemTypeDesc": "料件类别说明", + "selectWorkGroup": "请选择班组", + "selectUserWorkShiftNo": "请选择班製编号", + "nextMonth": "下月份", + "nextYear": "下年度", + "cannotModifyPastCalendars": "不可修改当日(包含当日)之前的班组日历", + "confirmCoverageWorkGroupCalendarInfo": "当前班组在{rangeText}已经有设定值，是否进行复盖", + "userWorkShift": "班製", + "userWorkShiftNo": "班製编号", + "userWorkShiftDesc": "班製说明", + "userWorkShiftNoExist": "班製编号: {userWorkShift}已存在", + "confirmDelUserWorkShift": "是否确认删除班製: {userWorkShift}", + "workPosition": "职级", + "workGroup": "班组编号", + "workGroupDesc": "班组说明", + "workGroupUser": "班组人员", + "workGroupType": "班组类型", + "workGroupTypeNo": "班组类型编号", + "workGroupTypeDesc": "班组类型说明", + "enterWorkGroupTypeNo": "请输入班组类型编号", + "confirmDelWorkGroupType": "是否确认删除班组类型: {workGroupType}", + "shippingLocation": "出货地点", + "shippingPlace": "出货地", + "country": "国家", + "address": "地址", + "user": "客户", + "userNoRequired": "客户编号不可为空", + "userNoExist": "客户编号: {customerNo}已存在", + "confirmDelUser": "是否确认删除客户: {customerNo}", + "inspLevel": "检验等级", + "confirmSelectInspPlanDel": "请选择要删除的检验计划", + "confirmSelectSupplierDel": "请选择要删除的供应商", + "itemMaterialMaintain": "料件维护", + "inspLevelNotSetMultiple": "检验等级『{str}』不可设定多个检验计划", + "confirmDelItemMaterialNo": "是否确认删除料件编号: {item}", + "contactPerson": "联络人", + "itemTypeExist": "料件类别: {typeNo}已存在", + "confirmDelItemType": "是否确认删除料件类别: {typeNo}", + "actionTiming": "作用时机", + "ruleLogic": "法则逻辑", + "rule": "法则", + "dispose": "处置", + "variable": "变数", + "operator": "运算子", + "checkValue": "判断值", + "startOp": "开始工序", + "exitOpTime": "出站时间", + "endOp": "结束工序", + "messaeRouter": "讯息 / 路径", + "controlRuleConfig": "管制法则配置", + "ruleLogicSetting": "法则逻辑设定", + "confirmRuleNoDel": "法则编号{ruleNo},是否确认删除", + "confirmRuleDel": "法则{rule},是否确认删除", + "confirmInOrderDuplicate": "顺序{seq}重複, 请确认", + "startOpIndicateTime": "开始工序的指定时间", + "endOpIndicateTime": "结束工序的指定时间", + "msgNotEmpty": "讯息不可为空", + "alarmCodeNotEmpty": "报警编号不可为空", + "routerNotEmpty": "路径不可为空", + "startOpEndOpDataNotEqual": "开始工序与结束工序所设定的资料不可完全相同", + "segmentNo": "工段编号", + "eventNo": "事件编号", + "eventName": "事件名称", + "eventDesc": "事件说明", + "severity": "严重度", + "duty": "责任", + "nonConformingGroup": "不合格群组", + "usableNonConformingGroup": "可用不合格群组", + "indicatedNonConformingGroup": "已指派不合格群组", + "selfDuty": "自责", + "otherDuty": "他责", + "nonConformanceCodeExist": "不合格代码: {ncCode}已存在", + "confirmDelNonComformingCode": "是否确认删除不合格代码: {ncCode}", + "usableNonConformingCode": "可用不合格代码", + "indicatedNonConformingCode": "已指派不合格代码", + "operationConfig": "工序配置", + "nonConformanceGroupExist": "不合格群组: {ncGroup}已存在", + "confirmDelNCGroup": "是否确认删除不合格群组: {ncGroup}", + "operationType": "工序类型", + "usableResrce": "可用设备", + "indicatedResrce": "已指派设备", + "usableItemType": "可用料件类别", + "indicatedItemType": "已指派料件类别", + "operationDataField": "工序主资料", + "confirmDelOperation": "是否确认删除ID为{operation}", + "operationExist": "工序: {operation}已存在", + "paramType": "参数类型", + "default": "默认", + "dataType": "型别", + "dataListSrc": "资料表来源", + "textSrc": "栏位来源", + "textDescSrc": "栏位说明来源", + "otherRequirement": "其他条件", + "dataList": "资料表", + "paramDataFields": "参数主资料", + "confirmDelParamNo": "是否确认删除参数编号: {parameterNo}", + "paramNoExist": "参数编号: {parameterNo}已存在", + "PDCNo": "PDC编号", + "PDCDataFields": "PDC主资料", + "confirmDelPDCNo": "是否确认删除PDC编号: {pdcNo}", + "selectParamForDel": "请选择要删除的参数", + "approve": "批准", + "release": "解签", + "approved": "已核准", + "notApproved": "未核准", + "operationForSegment": "工段对应的工序", + "inputKeywordForFilter": "输入关键字进行过滤", + "infoConfigForOperation": "工序相关资讯配置", + "operationDesc": "作业说明", + "controlRule": "管制法则", + "mapOffset": "Map偏移量", + "paramValue": "参数值", + "controlRuleNo": "管制法则编号", + "resrceAndFormula": "设备类别『{typeNo}』及主配方『{testProgramNo}』", + "toolCategoryAndType": "工具大类『{categoryNo}』,工具类别『{typeNo}』", + "notSetDuplicate": "不可重複设定", + "selectLimitResrce": "挑选限制的设备", + "selectSpareFormula": "挑选备用配方", + "doSearchFirst": "请先执行检索", + "itemRevisionApproveNotDel": "『{item}』、『{revision}』已核准,不得删除工段或工序", + "segmentNoOrOperationNo": "必须选择工段编号或工序编号", + "confirmDelOperation2": "是否确认删除工序: {treeOperation}", + "itemRevisionNotApproveByOperationNotSet": "{item} 、{revision}未设定工序,不得批准", + "itemRevisionNotApproveByMsgNotSet": "{item} 、{revision}未设定主要讯息,不得批准", + "confirmApprovePrdConfig": "是否核准『{item}』、『{revision}』的产品配置", + "approveSuccess": "核准成功", + "confirmDismissApproval": "是否确定对『{item}』、『{revision}』解除批准?", + "dismissSuccess": "解签成功", + "itemRevisionApprovedNotDel": "『{item}』、『{revision}』已核准,不得删除", + "confirmDelPrdConfig": "是否确认删除『{item}』、『{revision}』的产品配置", + "limitResrce": "限制设备", + "sourceMaterialNo": "来源料件编号", + "targetMaterialNo": "目标料件编号", + "targetRevision": "目标版本", + "targetExistApprovedNotCopy": "目标料件编号{newItem},版本{newRevision}已存在产品配置作业且状态为已核准,不可执行複製", + "confirmItemPrdParamConfigCover": "目标料件有配置产品生产参数,是否复盖?", + "copyComp": "複製完成", + "selectCategory": "请选择大类", + "selectType": "请选择类别", + "limitType": "限制类型", + "seqLimitedResrceNotEmpty": "序号{seq}的限制设备不可为空", + "formulaDesc": "配方说明", + "spareFormula": "备用配方", + "standardBatchAmount": "标准批量", + "orderSeq": "顺序「{el.seq}」", + "xYNotDuplicate": "X与Y不可重複", + "percent": "百分比", + "string": "字串", + "PDCDesc": "PDC说明", + "specCenter": "规格中心", + "prdConfigPDCParam": "产品配置作业-PDC参数", + "PDCPageSeqResrceNotEmpty": "PDC页签中，序号{seq}的设备类别不可为空", + "PDCPageSeqPDCNoNotEmpty": "PDC页签中，序号{seq}的PDC编号不可为空", + "PDCPageResrceTypeNotDuplicate": "PDC页签设备类别「{typeNo}」不可重複", + "paramNoMsg": "参数编号「{parameterNo}」", + "paramNoRule": "参数编号「{parameterNo}」不符合规格上限>规格下限", + "specificationCannotBeEmpty": "规格不可为空", + "RecipeNo": "Recipe编号", + "RecipeDesc": "Recipe说明", + "RecipeReversion": "Recipe版本", + "prdConfigRecipeParam": "产品配置作业-Recipe参数", + "pageRECIPESeqResrceTypeNotEmpty": "配方页签中，序号{seq}的设备类别不可为空", + "pageRECIPESeqRecipeNoNotEmpty": "配方页签中，序号{seq}的Recipe编号不可为空", + "pageRECIPESeqRecipeNoParamNotEmpty": "配方页签中，序号{seq}的Recipe编号的参数值不可为空", + "pageRECIPESeqRecipeNoHighLimitNotEmpty": "配方页签中，序号{seq}的Recipe编号的规格上限不可为空", + "pageRECIPESeqRecipeNoLowLimitNotEmpty": "配方页签中，序号{seq}的Recipe编号的规格下限不可为空", + "pageRECIPESeqRecipeNoSpecCenterNotEmpty": "配方页签中，序号{seq}的Recipe编号的规格中心不可为空", + "pageRECIPEResrceTypeNotDupilcate": "配方页签中设备类别「{typeNo}」不可重複", + "confirmDelReasonCode": "是否确认删除原因代码： {reasonCode}", + "paramNoDesc": "参数编号说明", + "selectParamNoForDel": "请选择要删除的参数编号", + "RecipeDataConfig": "Recipe主资料配置", + "RecipeDataFields": "Recipe主资料", + "paramItemNotEmpty": "参数清单不可为空", + "confirmDelRecipeNo": "是否确认删除Recipe编号: {recipeNo}", + "copySuccess": "複製成功", + "confirmSegmentChangedDelRouter": "工段已变更，已绘製的途程将删除，是否确定？", + "confirmDelRouter": "是否确认删除途程: {router}/{revision}", + "segmentDataFields": "工段主资料", + "orderShouldPositiveInt": "顺序应为正整数", + "segmentExist": "工段: {segmentNo}已存在", + "confirmDelSegment": "是否确认删除工段: {segmentNo}", + "confirmDelSupplierNo": "是否确定删除供应商编号{supplierNo}", + "phone": "电话", + "routerDraw": "途程-绘製", + "batchRule": "併批规则", + "specialUserBatchNo": "特批客户批号", + "setter": "设定人", + "batchRuleOrderCustom": "併批规则-工单自订", + "selectDelRow": "请先选择要删除的行", + "confirmSeqRemove": "序号{selectedSeqs}，确定要移除该笔资料吗?", + "seqInputSettingValueNRequired": "序号{missingValues}必须输入设定值(N)", + "uncheckCustomDataField": "未勾选相同工单自订的资料栏位", + "seqUserBatchNotEmpty": "序号{emptyLots}的客户批号不可为空", + "seqUserLotDuplicate": "序号{duplicateSeq}，客户批号重複", + "confirmNotSaveChange": "资料已异动且尚未保存，确定要取消此次异动吗?", + "equalPO": "同 PO", + "equalDateCode": "同 DateCode", + "differentPrdBatchNotOverN": "DateCode 不相同的生产批不超过(N)个", + "differenceNotOverWeekN": "DateCode 的差距不超过(N)周", + "equalUserLot": "同客户批号", + "differentUserLotNotOverN": "客户批号不相同的生产批不超过(N)个", + "equalTestingProgramRevision": "相同测试程式与版次", + "sameOrderCcstom": "相同工单自订", + "valid": "有效", + "EQURuleNo": "EQC规则编号", + "sampleRuleNo": "抽样规则编号", + "maxNumber": "最大几个", + "BINNo": "BIN编号", + "indicateBIN": "指定BIN", + "indicateCAT": "指定CAT", + "electricTestingRule": "电性抽测规则", + "confirmDelRuleNo": "是否确认删除{eqcRuleNo}", + "checkBIN": "请勾选BIN", + "sampleMethodMaxBINNotEmpty": "抽样方式为最大N个BIN时，最大几个不能为空", + "selectOneRow": "请先选择一行", + "allGoodCatNumber": "所有Good CAT数", + "indicateSingleCAT": "指定单一CAT", + "indicateMultipleCAT": "指定多个CAT", + "maximumSingleCAT": "最大一个CAT", + "maximumNCAT": "最大N个CAT", + "indicateRepleMultipleCAT": "指定多个CAT顺序补足", + "others": "其他", + "sampleType": "抽样类型", + "FTAutoSplitRule": "FT自动分批规则", + "splitRule": "分批规则", + "transferMethod": "转移方式", + "batchNo": "批号", + "keepOrigin": "沿用原始", + "prdNewNo": "产生新号", + "inputDirect": "直接输入", + "add": "加上", + "subtract": "减去", + "code": "码+", + "applyBIN": "套用BIN", + "applyCAT": "套用CAT", + "selectRouterNo": "请先选择途程编号", + "FTSplichRule": "FT分批规则", + "confirmDelItemSeq": "是否确认删除项次为{seq}", + "transferMethod2": "移转方式", + "itemNoChangeLogicNewNotEmpty": "产品编号变更逻辑为产生新号，料件编号不可为空", + "userPartChangeLogic": "客户料号变更逻辑为产生新号，客户料号不可为空", + "userLotChangeLogic": "客户批号变更逻辑为产生新号，请选择变更方式", + "inputFieldsNotEmpty": "直接输入输入值栏位不可为空", + "addingFieldNotEmpty": "加入输入值栏位不可为空", + "haltCodeOrInputFieldsNotEmpty": "保留码数或输入值栏位不可为空", + "haltCodePositiveInt": "保留码数必需为正整数", + "subtractCodeOrInputNotEmpty": "减去码数或输入值栏位不可为空", + "subtractCodePositiveInt": "减去码数必需为正整数", + "itemNoPositiveInt": "项次必需为正整数", + "leastCheckOneBIN": "至少勾选一个BIN", + "itemNotDuplicate": "项次不可重複", + "productCodeNotEmpty": "产品编号不能为空", + "splitNoRule": "分批编号规则", + "singleTest": "单次测试数", + "singleTestSecond": "单次测试秒数", + "singleTestPositiveInt": "单次测试数数应为正整数", + "ruleSingleTestSecond": "单次测试秒仅可输入大于0的数值，小数点允许2位", + "seqBINNoNotEmpty": "序号{seq}，BIN编号不可为空", + "seqResultNotEmpty": "序号{seq}，结果不可为空", + "CPTestProgram": "CP测试程式", + "FTTestProgram": "FT测试程式", + "insertNewItem": "插入新项", + "removeAll": "移除全部", + "fieldLabel": "栏位标籤", + "mandatory": "必须", + "enterCategory": "请输入类别", + "cannotRemoveDisabledRow": "不能移除已禁用行", + "noItemsToRemove": "没有要移除的项", + "confirmDeleteCustomData": "是否确认删除自订资料 {tableName}", + "numberType": "编号类型", + "orderType": "订单类型", + "definitionMethod": "定义方式", + "defineByContainer": "按容器定义", + "skipSequence": "跳过序列", + "prefix": "首码", + "suffix": "尾码", + "baseNumber": "基数", + "sequenceLength": "序列长度", + "maximumSequence": "最大序列", + "minimumSequence": "最小序列", + "increment": "增量", + "currentSequence": "当前序列", + "resetSequenceNumber": "重置序号", + "commitImmediately": "立即提交", + "numberingRuleExample": "编号规则示例", + "enterOrSelectNumberType": "请输入或选择编号类型", + "enterBaseNumber": "请输入基数", + "maxLength128Characters": "最大长度为128字元", + "enterCurrentSequence": "请输入当前序列", + "materialGroup": "物料组", + "noData": "没有资料", + "searchBeforeDeleting": "请先检索之后再删除", + "never": "从不", + "always": "总是", + "daily": "每天", + "weekly": "每週", + "monthly": "每月", + "yearly": "每年", + "weeklySunday": "每週 - 星期日", + "weeklyMonday": "每週 - 星期一", + "weeklyTuesday": "每週 - 星期二", + "weeklyWednesday": "每週 - 星期三", + "weeklyThursday": "每週 - 星期四", + "weeklyFriday": "每週 - 星期五", + "weeklySaturday": "每週 - 星期六", + "carrierTypeDesc": "载具类型说明", + "enterCarrierType": "请输入载具类型", + "enterCarrier": "请输入载具编号", + "layoutColumns": "栏数", + "layoutRows": "列数", + "layoutCapacity": "最大容量", + "layoutMapping": "载具位置图", + "layoutType": "载具位置类型", + "containerType0": "不需要位置", + "containerType1": "单栏排列", + "containerType2": "矩阵排列", + "mappingNo": "位置编码", + "carrierTypeExist": "载具类型: {carrierType}已存在", + "carrierExist": "载具编号: {carrier}已存在", + "confirmDelCarrierType": "是否确认删除载具类型: {carrierType}", + "confirmDelCarrier": "是否确认删除载具编号: {carrier}", + "carrierMemberActive": "载具作业", + "carrierBind": "绑定", + "carrierUnBind": "解绑", + "operationType2": "操作类型", + "carrierNumber": "载具数量", + "carrierTypeBo": "载具类型BO", + "status1": "使用中", + "status2": "闲置", + "automaticGeneration": "自动生成", + "lotNo": "Lot No", + "currentLoadQty": "当前装载数量", + "positionLabel": "位置标签", + "position": "位置", + "batchCreation": "批量创建", + "confirmDelWorkGroupNo": "是否确认删除该班组编号：{workGroup}", + "startLineInspectionNumber": "开线检编号", + "lineInspectionConfiguration": "开线检配置", + "addLineInspectionConfiguration": "开线检配置-新增", + "viewLineInspectionConfiguration": "开线检配置-查看", + "editLineInspectionConfiguration": "开线检配置-编辑", + "checkItem": "检查项目", + "processOrProductionLine": "工序/产线", + "availableProductionLines": "可用产线", + "assignedProductionLines": "已指派产线", + "customData": "自定资料", + "deactivate": "停用", + "confirmDeletionOfLineInspectionId": "是否确认删除开线检编号 {id}", + "keyCannotBeEmpty": "{key}不能为空", + "processStep": "工步", + "selectProcessStepToDelete": "请选择要删除的工步", + "action": "动作", + "feeding": "投料", + "issueCommand": "下指令", + "systemIntegration": "系统对接", + "feedingOpen": "投料开启", + "issueCommandWaitForResponseOpen": "下指令 - 等待回应", + "issueCommandNoWaitForResponseOpen": "下指令 - 不等回应", + "alarmOpen": "Alarm 开启", + "systemIntegrationOpen": "系统对接开启", + "actionContent": "动作内容", + "processStepFeedingContent": "工步-投料内容", + "processStepIssueCommandContent": "工步-下指令内容", + "processStepAlarmContent": "工步-Alarm内容", + "processStepSystemIntegrationContent": "工步-系统对接内容", + "processStepParameters": "工步-参数", + "systemName": "系统名称", + "materialCannotBeEmpty": "物料不可为空", + "standardNumberCannotBeEmpty": "标准数不可为空", + "unitQuantityCannotBeEmpty": "单位量不可为空", + "commandIDCannotBeEmpty": "commandID 不可为空", + "eventIDCannotBeEmpty": "Event ID 不可为空", + "systemNameCannotBeEmpty": "系统名称不可为空", + "messageIDCannotBeEmpty": "Message ID 不可为空", + "processStepListCannotBeEmpty": "工步清单不可为空", + "enterProcessStep": "请输入工步", + "selectAction": "请选择动作", + "enterProcessStepActionContent": "请输入工步 {step} 动作 {action} 的动作内容", + "parameterLimitsCannotBeEmpty": "序号 {seq} 参数编号「{parameterNo}」的规格上下限不可为空", + "parameterDoesNotMeetLimits": "序号 {seq} 参数编号「{parameterNo}」不符合规格上限 > 规格下限", + "parameterValueCannotBeEmpty": "序号 {seq} 参数编号「{parameterNo}」的参数值不可为空", + "confirmDeletionOfSelectedRows": "是否确认删除选中的行", + "unbindAllConfirm": "确定解除所有绑定？", + "enterRecipeNumber": "请输入Recipe编号", + "enterVersion": "请输入版本", + "selectType2": "请选择类型", + "enterStandardNumber": "请输入标准数", + "numericInputOnly": "只能输入数值", + "standardNumberMustBeGreaterThanZero": "标准数必须大于零", + "stadQuantityAllowsUpToSixDecimals": "标准数最多允许六位小数", + "enterUnitQuantity": "请输入单位量", + "unitQuantityMustBeGreaterThanZero": "单位量必须大于零", + "unitQuantityAllowsUpToSixDecimals": "单位量最多允许六位小数", + "parameterNumberDuplicated": "参数编号 {parameterNo} 在序号 {duplicatedSeqs} 中重複设定", + "typeNoDuplicated": "设备类别 {typeNo} 在序号 {seq} 中重複设定", + "parameterNumberCannotBeEmpty": "参数编号不可为空", + "specLimitsCannotBeEmpty": "配方页籤，顺序 {seq} Recipe编号 {recipeNo} 的参数编号 {parameterNo} 规格上下限不可为空", + "typeNoParameterValueCannotBeEmpty": "配方页籤，顺序 {seq} Recipe编号 {recipeNo} 的参数编号 {parameterNo} 参数值不可为空", + "carrierPositionDuplicate": "载具位置{No}不可重複", + "workCenterNumber": "工作中心编号", + "mixingLinesAllowed": "是否可混线", + "workCenterCannotBeEmpty": "序号 {seq} 产线编号不可为空", + "workCenterCannotBeDuplicated": "产线编号 {workCenter} 不可重復", + "targetSourceMaterialVersionCannotBeSame": "目标料件编号/版本不可与来源料件编号/版本相同", + "resrceStatus": "设备状态", + "toolStatus": "工具状态", + "rework": "重工", + "subProcess": "子流程", + "tempProcess": "临时流程", + "prd": "製造", + "purchase": "采购", + "overZero": "须大于0", + "carrierSaveSuccessAndPrint": "载具新增成功，是否打印标籤?", + "capacityNotEnough": "载具『{carrier}』容量不足，无法装载", + "positionNotEnough": "载具『{carrier}』位置不足，无法装载", + "overSingleSelected": "请选择一个装载位置", + "positionLotLoaded": "载具位置『{position}』已有摆放LOT，请先移除LOT", + "selectLotDelete": "请先选择要删除的LOT", + "confirmRemoveAll": "是否清空载具上的所有LOT", + "confirmCancel": "是否取消此次变更", + "inputLotNo": "请输入Lot No", + "virtualItem": "虚拟料件编号", + "virtualItemRepeat": "料件明细已有此虚拟料件编号「{item}」，不可重复配置", + "virtualItemExist": "当前物料清单中不存在虚拟料件编号「{item}」", + "virtualItemBind": "虚拟料件「{item}」已被其他料件绑定，不允许删除", + "router": { + "error1": "工艺路线已在使用中，无法删除链接", + "error2": "不能连接自己", + "error3": "不能重复连线", + "error4": "不能回环", + "error5": "工艺路线已在使用中，无法新增节点", + "error6": "请把节点拖入到画布中", + "error7": "开始节点不能重复添加", + "error8": "结束节点不能重复添加", + "error9": "工艺路线已在使用中，无法删除节点", + "error10": "必须有一个开始节点", + "error11": "必须有一个结束节点", + "error12": "途程节点【{node}】步骤不能为空", + "error13": "节点【{node}】步骤【{step}】不可重复", + "error14": "途程节点连接不能为空", + "error15": "途程类型为『维修』，途程上仅可有一个维修工序", + "confirm1": "确定删除所点击的线吗?", + "confirm2": "确定要删除节点[{node}]?", + "success1": "连线成功" + }, + "sequenceDeviceCategoryPdcParameterValueNotMaintained": "PDC参数值未维护，不允许保存", + "startNode": "开始节点", + "otherSteps": "其它步骤", + "reworkProcess": "重工流程", + "nodeInformation": "节点信息", + "erpSteps": "ERP步骤", + "connectionInformation": "连线信息", + "script": "脚本", + "processDataInformation": "流程数据信息", + "processRouteInformation": "工艺路线信息", + "reservedIdentifier": "保留标识", + "processRouteType": "工艺路线类型", + "enterProcessRoute": "请输入工艺路线", + "selectProcessRouteType": "请选择工艺路线类型", + "returnToOriginalState": "返回（原始状态）", + "returnToAny": "返回（任意）", + "returnToPrevious": "返回（上一个）", + "returnToAnyPrevious": "返回（任意上一个）", + "returnToNext": "返回（下一个）" +} diff --git a/src/locale/i18n/zh/tqm/qms.json b/src/locale/i18n/zh/tqm/qms.json index 68aafe1..b45131e 100755 --- a/src/locale/i18n/zh/tqm/qms.json +++ b/src/locale/i18n/zh/tqm/qms.json @@ -94,7 +94,7 @@ "specificationControlCannotBeEmpty": "规格控管不可为空", "sampleNumberCannotBeEmpty": "样本数不可为空", "operationSuccessful": "{showTitle} 成功", - "confirmDeleteInspectionPlan": "是否确定删除检验计画: {qcPlan}", + "confirmDeleteInspectionPlan": "是否确定删除检验计划: {qcPlan}", "spcAnalysis": "SPC分析", "measurement": "计量", "inspectionItemCannotBeEmpty": "检验项目不可为空", @@ -138,7 +138,7 @@ "firstProductionBatchAfterHoursOfReactivation": "小时以上再启用第一个生产的程式批/SFC", "interval": "间隔", "hoursMachinePlusMaterial": "小时(机台+物料)", - "hoursMachinePlusInspectionPlan": "小时(机台+检验计画)", + "hoursMachinePlusInspectionPlan": "小时(机台+检验计划)", "every": "每", "perBatchOrSfc": "个程式批/SFC", "fixedTimeEveryDay": "每日固定几点", @@ -309,7 +309,7 @@ "confirm2": "确定要删除节点[{node}]?", "success1": "连线成功" }, - "qcTaskErrorList":{ + "qcTaskErrorList": { "error1": "请先选择适配方案/流程", "error2": "适配方案/流程 存在未选项", "error3": "项目分配不能为空", diff --git a/src/locale/i18n/zh_tw/tqm/index.json b/src/locale/i18n/zh_tw/tqm/index.json index 4733b3e..000e805 100755 --- a/src/locale/i18n/zh_tw/tqm/index.json +++ b/src/locale/i18n/zh_tw/tqm/index.json @@ -88,9 +88,9 @@ "testDieAmount": "测试Die数", "programNo": "编号", "dispatchQuantity": "派工数量", - "plannedCompletionTime": "计画完成时间", + "plannedCompletionTime": "计划完成时间", "enterDispatchQuantity": "请输入派工数量", - "planStartTime": "计画开始时间", + "planStartTime": "计划开始时间", "modificationSuccessful": "修改成功", "toolNumber": "工具编号", "toolCategoryDescription": "工具类别说明", @@ -175,8 +175,8 @@ "invalidateAfterSplitBatch": "分併批后失效", "period": "週期", "inspecType": "检验类型", - "qcPlan": "检验计画编号", - "qcPlanDesc": "检验计画说明", + "qcPlan": "检验计划编号", + "qcPlanDesc": "检验计划说明", "qcItem": "检验项目编号", "qcRole": "检验人员群组", "ncCode": "不合格代码", @@ -189,7 +189,7 @@ "inspection": "检验", "inspectionItemDescription": "检验项目说明", "samplingMethod": "抽样方式", - "inspectionPlan": "检验计画", + "inspectionPlan": "检验计划", "createNew": "新建", "inOperation": "作业中", "closed": "已关闭", @@ -291,9 +291,9 @@ "splitInvalid": "失效（分批）", "ruleState": "请选择状态", "personnel": "人员", - "planStartDate": "计画开始日期", + "planStartDate": "计划开始日期", "qtyReleased": "已下达数量", - "planEndDate": "计画结束日期", + "planEndDate": "计划结束日期", "standardNumber": "标准数", "unitQty": "单位量", "hold": "保留", @@ -413,122 +413,122 @@ "dealMethodAfter": "留樣處置", "selectResult": "請選擇結果", "enterText": "請輸入內文", - "sampleDisposal":"樣品處置", - "report":"報告", - "tobeTested":"待檢測完成", - "inspectionResource":"檢驗儀器", - "itemResultTime":"檢驗完成時間", - "inspectionOperation":"檢驗工作", - "inspectionCompleted":"檢驗完成", - "materialSelection":"物料選擇", - "inspectionSchemeSelection":"檢驗方案選擇", - "inspectorSelection":"檢驗人員選擇", - "inspectorName":"檢驗人員名稱", - "inspectionTaskSelection":"檢驗任務選擇", - "retentionSample":"留樣", - "stockReturn":"退庫", - "taskManageMessage1":"檢測值不能為空！", - "taskManageMessage2":"第{key}行的檢測值不能為空", - "taskManageMessage3":"請選擇檢測結果值！", - "taskManageMessage4":"當前任務單下的所有檢測項目全都檢驗完成！", - "taskManageMessage5":"檢驗完成確認成功！", - "taskManageMessage6":"當前任務單檢測項未檢驗完成,不可判定結果！", - "taskManageMessage7":"是否確定關閉此檢測任務單？", - "taskManageMessage8":"渲染失敗,文件大小為空", - "taskManageMessage9":"樣品數據為空,無需執行處置", - "taskManageMessage10":"第{key}行,處置管道不能為空", - "taskManageMessage11":"第{key}行,處置管道為留樣時,留樣日期不能為空", - "taskManageMessage12":"樣品處置成功！", - "createMaterialReceipt":"創建收料單", - "addOrModify":"項次新增或修改", - "searchable":"可蒐索", - "receiptNo":"單號", - "supplierSelection":"供應商選擇", - "userSelection":"人員選擇", - "invSelection":"倉庫選擇", - "isUseInspect":"是否檢測使用", - "listDetailNotNull":"清單明細不能為空", - "listDetailDuplicate":"清單明細重複", - "invNoNull":"倉庫編號在庫存中不存在！", - "scraper":"報廢人", - "returnForm":"退還單", - "returnFormNo":"退還單號", - "returnedBy":"退還人", - "returnInstructions":"退還說明", - "customerAndSupply":"客|供", - "scrapForm":"樣品報廢單", - "scrapFormNo":"報廢單號", - "scrapDescription":"報廢說明", - "targetWarehouse":"目標倉庫", - "targetShelf":"目標貨架", - "targetLocation":"目標貨位", - "allocate":"調撥", - "modulation":"調數", - "print":"列印", - "inventoryTransfer":"庫存轉移", - "inventorySplitting":"庫存折開", - "sampleManageMessage1":"單據創建成功！", - "sampleManageMessage2":"確定要删除該項次嗎？", - "sampleManageMessage3":"確認删除", - "sampleManageMessage4":"該收料單沒有明細,請先添加明細或檢索後再確認！", - "sampleManageMessage5":"該收料單沒有明細,請先添加明細或檢索後再報廢！", - "sampleManageMessage6":"報廢成功！", - "sampleManageMessage7":"入庫/退貨成功！", - "sampleManageMessage8":"單據沒有明細數據,請添加明細數據後再確認領用！", - "sampleManageMessage9":"確認是否領用該單據？", - "sampleManageMessage10":"是否確認删除單號:", - "sampleManageMessage11":"料件批次不存在,請檢查掃入的條碼！", - "sampleManageMessage12":"料件批次在庫存中不存在！", - "sampleManageMessage13":"儲位在庫存中不存在！", - "sampleManageMessage14":"貨位在庫存中不存在！", - "sampleManageMessage15":"貨架編號在庫存中不存在！", - "sampleManageMessage16":"第{key}行領用數量不能為空", - "sampleManageMessage17":"第{key}行領用數量不能大於庫存數量", - "sampleManageMessage18":"檢測使用時,{key}料件批次檢驗單號為必填,請檢查！", - "sampleManageMessage19":"供應商必填", - "sampleManageMessage20":"退還人必填", - "sampleManageMessage21":"單據沒有明細數據,請添加明細數據後再確認退還！", - "sampleManageMessage22":"確認是否退還該單據？", - "sampleManageMessage23":"請先選擇供應商", - "sampleManageMessage24":"單據沒有明細數據,請添加明細數據後再確認報廢！", - "sampleManageMessage25":"確認是否報廢該單據？", - "sampleManageMessage26":"新倉庫和舊倉庫不能一樣！", - "sampleManageMessage27":"是否確定調撥至『{key}』倉庫？", - "sampleManageMessage28":"是否確定轉移至『{key}』？", - "sampleManageMessage29":"修改數量不可為空", - "sampleManageMessage30":"沒有打印機,也沒有標籤樣式,暫未實際接入", - "sampleManageMessage31":"請先選擇目標貨架", + "sampleDisposal": "樣品處置", + "report": "報告", + "tobeTested": "待檢測完成", + "inspectionResource": "檢驗儀器", + "itemResultTime": "檢驗完成時間", + "inspectionOperation": "檢驗工作", + "inspectionCompleted": "檢驗完成", + "materialSelection": "物料選擇", + "inspectionSchemeSelection": "檢驗方案選擇", + "inspectorSelection": "檢驗人員選擇", + "inspectorName": "檢驗人員名稱", + "inspectionTaskSelection": "檢驗任務選擇", + "retentionSample": "留樣", + "stockReturn": "退庫", + "taskManageMessage1": "檢測值不能為空！", + "taskManageMessage2": "第{key}行的檢測值不能為空", + "taskManageMessage3": "請選擇檢測結果值！", + "taskManageMessage4": "當前任務單下的所有檢測項目全都檢驗完成！", + "taskManageMessage5": "檢驗完成確認成功！", + "taskManageMessage6": "當前任務單檢測項未檢驗完成,不可判定結果！", + "taskManageMessage7": "是否確定關閉此檢測任務單？", + "taskManageMessage8": "渲染失敗,文件大小為空", + "taskManageMessage9": "樣品數據為空,無需執行處置", + "taskManageMessage10": "第{key}行,處置管道不能為空", + "taskManageMessage11": "第{key}行,處置管道為留樣時,留樣日期不能為空", + "taskManageMessage12": "樣品處置成功！", + "createMaterialReceipt": "創建收料單", + "addOrModify": "項次新增或修改", + "searchable": "可蒐索", + "receiptNo": "單號", + "supplierSelection": "供應商選擇", + "userSelection": "人員選擇", + "invSelection": "倉庫選擇", + "isUseInspect": "是否檢測使用", + "listDetailNotNull": "清單明細不能為空", + "listDetailDuplicate": "清單明細重複", + "invNoNull": "倉庫編號在庫存中不存在！", + "scraper": "報廢人", + "returnForm": "退還單", + "returnFormNo": "退還單號", + "returnedBy": "退還人", + "returnInstructions": "退還說明", + "customerAndSupply": "客|供", + "scrapForm": "樣品報廢單", + "scrapFormNo": "報廢單號", + "scrapDescription": "報廢說明", + "targetWarehouse": "目標倉庫", + "targetShelf": "目標貨架", + "targetLocation": "目標貨位", + "allocate": "調撥", + "modulation": "調數", + "print": "列印", + "inventoryTransfer": "庫存轉移", + "inventorySplitting": "庫存折開", + "sampleManageMessage1": "單據創建成功！", + "sampleManageMessage2": "確定要删除該項次嗎？", + "sampleManageMessage3": "確認删除", + "sampleManageMessage4": "該收料單沒有明細,請先添加明細或檢索後再確認！", + "sampleManageMessage5": "該收料單沒有明細,請先添加明細或檢索後再報廢！", + "sampleManageMessage6": "報廢成功！", + "sampleManageMessage7": "入庫/退貨成功！", + "sampleManageMessage8": "單據沒有明細數據,請添加明細數據後再確認領用！", + "sampleManageMessage9": "確認是否領用該單據？", + "sampleManageMessage10": "是否確認删除單號:", + "sampleManageMessage11": "料件批次不存在,請檢查掃入的條碼！", + "sampleManageMessage12": "料件批次在庫存中不存在！", + "sampleManageMessage13": "儲位在庫存中不存在！", + "sampleManageMessage14": "貨位在庫存中不存在！", + "sampleManageMessage15": "貨架編號在庫存中不存在！", + "sampleManageMessage16": "第{key}行領用數量不能為空", + "sampleManageMessage17": "第{key}行領用數量不能大於庫存數量", + "sampleManageMessage18": "檢測使用時,{key}料件批次檢驗單號為必填,請檢查！", + "sampleManageMessage19": "供應商必填", + "sampleManageMessage20": "退還人必填", + "sampleManageMessage21": "單據沒有明細數據,請添加明細數據後再確認退還！", + "sampleManageMessage22": "確認是否退還該單據？", + "sampleManageMessage23": "請先選擇供應商", + "sampleManageMessage24": "單據沒有明細數據,請添加明細數據後再確認報廢！", + "sampleManageMessage25": "確認是否報廢該單據？", + "sampleManageMessage26": "新倉庫和舊倉庫不能一樣！", + "sampleManageMessage27": "是否確定調撥至『{key}』倉庫？", + "sampleManageMessage28": "是否確定轉移至『{key}』？", + "sampleManageMessage29": "修改數量不可為空", + "sampleManageMessage30": "沒有打印機,也沒有標籤樣式,暫未實際接入", + "sampleManageMessage31": "請先選擇目標貨架", "attachmentList": { - "pdfShow":"PDF預覽", - "docsShow":"DOCX預覽", - "excelShow":"EXCEL預覽", - "pictureShow":"圖片預覽", - "uploadTemplate":"上傳範本", + "pdfShow": "PDF預覽", + "docsShow": "DOCX預覽", + "excelShow": "EXCEL預覽", + "pictureShow": "圖片預覽", + "uploadTemplate": "上傳範本", "emptyFile": "無附件", - "fileName":"檔案名稱", - "fileType":"檔案類型", - "uploader":"上傳者", - "size":"大小", - "clickUpdate":"點擊上傳", - "TemplateCode":"範本編號", - "TemplateName":"範本名稱", - "TemplateType":"範本類型", - "upload":"上傳", - "preview":"預覽", - "download":"下載", - "delete":"移除", - "testReport":"檢測報告", - "uploadSuccess":"上傳成功", + "fileName": "檔案名稱", + "fileType": "檔案類型", + "uploader": "上傳者", + "size": "大小", + "clickUpdate": "點擊上傳", + "TemplateCode": "範本編號", + "TemplateName": "範本名稱", + "TemplateType": "範本類型", + "upload": "上傳", + "preview": "預覽", + "download": "下載", + "delete": "移除", + "testReport": "檢測報告", + "uploadSuccess": "上傳成功", "fileOperation": "檔案操作", - "message1":"將檔案拖到此處,或", - "message2":"只能上傳Excel、Word、Jpg、Png、Pdf檔案,且只能傳單個檔案,單個檔案不超過10M", - "message3":"新增範本配寘", - "message4":"請輸入範本編號", - "message5":"請輸入範本類型", - "message6":"是否確定删除範本檔案", - "message7":"删除範本檔案成功", - "message8":"只能上傳一個檔案", - "message9":"檔案{key}已經存在", + "message1": "將檔案拖到此處,或", + "message2": "只能上傳Excel、Word、Jpg、Png、Pdf檔案,且只能傳單個檔案,單個檔案不超過10M", + "message3": "新增範本配寘", + "message4": "請輸入範本編號", + "message5": "請輸入範本類型", + "message6": "是否確定删除範本檔案", + "message7": "删除範本檔案成功", + "message8": "只能上傳一個檔案", + "message9": "檔案{key}已經存在", "message10": "``是否確定删除該筆記錄和範本" } } diff --git a/src/locale/i18n/zh_tw/tqm/prd.json b/src/locale/i18n/zh_tw/tqm/prd.json index 4e946b9..f1924f5 100755 --- a/src/locale/i18n/zh_tw/tqm/prd.json +++ b/src/locale/i18n/zh_tw/tqm/prd.json @@ -1,475 +1,475 @@ { - "BOMNo": "BOM编号", - "currentRevision": "目前版本", - "unitConsume": "单位耗用量", - "unitPrdAmount": "单位生产数", - "confirmDelItemList": "是否确认删除物料清单{bom}/{bomType}/{revision}", - "itemOperationDuplicate": "料件编号:{component} 投料点:{operation}重複", - "BOMMaintainItemDetail": "BOM必须维护料件明细", - "item": "料件", - "itemTypeDesc": "料件类别说明", - "selectWorkGroup": "请选择班组", - "selectUserWorkShiftNo": "请选择班製编号", - "nextMonth": "下月份", - "nextYear": "下年度", - "cannotModifyPastCalendars": "不可修改当日(包含当日)之前的班组日历", - "confirmCoverageWorkGroupCalendarInfo": "当前班组在{rangeText}已经有设定值，是否进行复盖", - "userWorkShift": "班製", - "userWorkShiftNo": "班製编号", - "userWorkShiftDesc": "班製说明", - "userWorkShiftNoExist": "班製编号: {userWorkShift}已存在", - "confirmDelUserWorkShift": "是否确认删除班製: {userWorkShift}", - "workPosition": "职级", - "workGroup": "班组编号", - "workGroupDesc": "班组说明", - "workGroupUser": "班组人员", - "workGroupType": "班组类型", - "workGroupTypeNo": "班组类型编号", - "workGroupTypeDesc": "班组类型说明", - "enterWorkGroupTypeNo": "请输入班组类型编号", - "confirmDelWorkGroupType": "是否确认删除班组类型: {workGroupType}", - "shippingLocation": "出货地点", - "shippingPlace": "出货地", - "country": "国家", - "address": "地址", - "user": "客户", - "userNoRequired": "客户编号不可为空", - "userNoExist": "客户编号: {customerNo}已存在", - "confirmDelUser": "是否确认删除客户: {customerNo}", - "inspLevel": "检验等级", - "confirmSelectInspPlanDel": "请选择要删除的检验计画", - "confirmSelectSupplierDel": "请选择要删除的供应商", - "itemMaterialMaintain": "料件维护", - "inspLevelNotSetMultiple": "检验等级『{str}』不可设定多个检验计画", - "confirmDelItemMaterialNo": "是否确认删除料件编号: {item}", - "contactPerson": "联络人", - "itemTypeExist": "料件类别: {typeNo}已存在", - "confirmDelItemType": "是否确认删除料件类别: {typeNo}", - "actionTiming": "作用时机", - "ruleLogic": "法则逻辑", - "rule": "法则", - "dispose": "处置", - "variable": "变数", - "operator": "运算子", - "checkValue": "判断值", - "startOp": "开始工序", - "exitOpTime": "出站时间", - "endOp": "结束工序", - "messaeRouter": "讯息 / 路径", - "controlRuleConfig": "管制法则配置", - "ruleLogicSetting": "法则逻辑设定", - "confirmRuleNoDel": "法则编号{ruleNo},是否确认删除", - "confirmRuleDel": "法则{rule},是否确认删除", - "confirmInOrderDuplicate": "顺序{seq}重複, 请确认", - "startOpIndicateTime": "开始工序的指定时间", - "endOpIndicateTime": "结束工序的指定时间", - "msgNotEmpty": "讯息不可为空", - "alarmCodeNotEmpty": "报警编号不可为空", - "routerNotEmpty": "路径不可为空", - "startOpEndOpDataNotEqual": "开始工序与结束工序所设定的资料不可完全相同", - "segmentNo": "工段编号", - "eventNo": "事件编号", - "eventName": "事件名称", - "eventDesc": "事件说明", - "severity": "严重度", - "duty": "责任", - "nonConformingGroup": "不合格群组", - "usableNonConformingGroup": "可用不合格群组", - "indicatedNonConformingGroup": "已指派不合格群组", - "selfDuty": "自责", - "otherDuty": "他责", - "nonConformanceCodeExist": "不合格代码: {ncCode}已存在", - "confirmDelNonComformingCode": "是否确认删除不合格代码: {ncCode}", - "usableNonConformingCode": "可用不合格代码", - "indicatedNonConformingCode": "已指派不合格代码", - "operationConfig": "工序配置", - "nonConformanceGroupExist": "不合格群组: {ncGroup}已存在", - "confirmDelNCGroup": "是否确认删除不合格群组: {ncGroup}", - "operationType": "工序类型", - "usableResrce": "可用设备", - "indicatedResrce": "已指派设备", - "usableItemType": "可用料件类别", - "indicatedItemType": "已指派料件类别", - "operationDataField": "工序主资料", - "confirmDelOperation": "是否确认删除ID为{operation}", - "operationExist": "工序: {operation}已存在", - "paramType": "参数类型", - "default": "默认", - "dataType": "型别", - "dataListSrc": "资料表来源", - "textSrc": "栏位来源", - "textDescSrc": "栏位说明来源", - "otherRequirement": "其他条件", - "dataList": "资料表", - "paramDataFields": "参数主资料", - "confirmDelParamNo": "是否确认删除参数编号: {parameterNo}", - "paramNoExist": "参数编号: {parameterNo}已存在", - "PDCNo": "PDC编号", - "PDCDataFields": "PDC主资料", - "confirmDelPDCNo": "是否确认删除PDC编号: {pdcNo}", - "selectParamForDel": "请选择要删除的参数", - "approve": "批准", - "release": "解签", - "approved": "已核准", - "notApproved": "未核准", - "operationForSegment": "工段对应的工序", - "inputKeywordForFilter": "输入关键字进行过滤", - "infoConfigForOperation": "工序相关资讯配置", - "operationDesc": "作业说明", - "controlRule": "管制法则", - "mapOffset": "Map偏移量", - "paramValue": "参数值", - "controlRuleNo": "管制法则编号", - "resrceAndFormula": "设备类别『{typeNo}』及主配方『{testProgramNo}』", - "toolCategoryAndType": "工具大类『{categoryNo}』,工具类别『{typeNo}』", - "notSetDuplicate": "不可重複设定", - "selectLimitResrce": "挑选限制的设备", - "selectSpareFormula": "挑选备用配方", - "doSearchFirst": "请先执行检索", - "itemRevisionApproveNotDel": "『{item}』、『{revision}』已核准,不得删除工段或工序", - "segmentNoOrOperationNo": "必须选择工段编号或工序编号", - "confirmDelOperation2": "是否确认删除工序: {treeOperation}", - "itemRevisionNotApproveByOperationNotSet": "{item} 、{revision}未设定工序,不得批准", - "itemRevisionNotApproveByMsgNotSet": "{item} 、{revision}未设定主要讯息,不得批准", - "confirmApprovePrdConfig": "是否核准『{item}』、『{revision}』的产品配置", - "approveSuccess": "核准成功", - "confirmDismissApproval": "是否确定对『{item}』、『{revision}』解除批准?", - "dismissSuccess": "解签成功", - "itemRevisionApprovedNotDel": "『{item}』、『{revision}』已核准,不得删除", - "confirmDelPrdConfig": "是否确认删除『{item}』、『{revision}』的产品配置", - "limitResrce": "限制设备", - "sourceMaterialNo": "来源料件编号", - "targetMaterialNo": "目标料件编号", - "targetRevision": "目标版本", - "targetExistApprovedNotCopy": "目标料件编号{newItem},版本{newRevision}已存在产品配置作业且状态为已核准,不可执行複製", - "confirmItemPrdParamConfigCover": "目标料件有配置产品生产参数,是否复盖?", - "copyComp": "複製完成", - "selectCategory": "请选择大类", - "selectType": "请选择类别", - "limitType": "限制类型", - "seqLimitedResrceNotEmpty": "序号{seq}的限制设备不可为空", - "formulaDesc": "配方说明", - "spareFormula": "备用配方", - "standardBatchAmount": "标准批量", - "orderSeq": "顺序「{el.seq}」", - "xYNotDuplicate": "X与Y不可重複", - "percent": "百分比", - "string": "字串", - "PDCDesc": "PDC说明", - "specCenter": "规格中心", - "prdConfigPDCParam": "产品配置作业-PDC参数", - "PDCPageSeqResrceNotEmpty": "PDC页签中，序号{seq}的设备类别不可为空", - "PDCPageSeqPDCNoNotEmpty": "PDC页签中，序号{seq}的PDC编号不可为空", - "PDCPageResrceTypeNotDuplicate": "PDC页签设备类别「{typeNo}」不可重複", - "paramNoMsg": "参数编号「{parameterNo}」", - "paramNoRule": "参数编号「{parameterNo}」不符合规格上限>规格下限", - "specificationCannotBeEmpty": "规格不可为空", - "RecipeNo": "Recipe编号", - "RecipeDesc": "Recipe说明", - "RecipeReversion": "Recipe版本", - "prdConfigRecipeParam": "产品配置作业-Recipe参数", - "pageRECIPESeqResrceTypeNotEmpty": "配方页签中，序号{seq}的设备类别不可为空", - "pageRECIPESeqRecipeNoNotEmpty": "配方页签中，序号{seq}的Recipe编号不可为空", - "pageRECIPESeqRecipeNoParamNotEmpty": "配方页签中，序号{seq}的Recipe编号的参数值不可为空", - "pageRECIPESeqRecipeNoHighLimitNotEmpty": "配方页签中，序号{seq}的Recipe编号的规格上限不可为空", - "pageRECIPESeqRecipeNoLowLimitNotEmpty": "配方页签中，序号{seq}的Recipe编号的规格下限不可为空", - "pageRECIPESeqRecipeNoSpecCenterNotEmpty": "配方页签中，序号{seq}的Recipe编号的规格中心不可为空", - "pageRECIPEResrceTypeNotDupilcate": "配方页签中设备类别「{typeNo}」不可重複", - "confirmDelReasonCode": "是否确认删除原因代码： {reasonCode}", - "paramNoDesc": "参数编号说明", - "selectParamNoForDel": "请选择要删除的参数编号", - "RecipeDataConfig": "Recipe主资料配置", - "RecipeDataFields": "Recipe主资料", - "paramItemNotEmpty": "参数清单不可为空", - "confirmDelRecipeNo": "是否确认删除Recipe编号: {recipeNo}", - "copySuccess": "複製成功", - "confirmSegmentChangedDelRouter": "工段已变更，已绘製的途程将删除，是否确定？", - "confirmDelRouter": "是否确认删除途程: {router}/{revision}", - "segmentDataFields": "工段主资料", - "orderShouldPositiveInt": "顺序应为正整数", - "segmentExist": "工段: {segmentNo}已存在", - "confirmDelSegment": "是否确认删除工段: {segmentNo}", - "confirmDelSupplierNo": "是否确定删除供应商编号{supplierNo}", - "phone": "电话", - "routerDraw": "途程-绘製", - "batchRule": "併批规则", - "specialUserBatchNo": "特批客户批号", - "setter": "设定人", - "batchRuleOrderCustom": "併批规则-工单自订", - "selectDelRow": "请先选择要删除的行", - "confirmSeqRemove": "序号{selectedSeqs}，确定要移除该笔资料吗?", - "seqInputSettingValueNRequired": "序号{missingValues}必须输入设定值(N)", - "uncheckCustomDataField": "未勾选相同工单自订的资料栏位", - "seqUserBatchNotEmpty": "序号{emptyLots}的客户批号不可为空", - "seqUserLotDuplicate": "序号{duplicateSeq}，客户批号重複", - "confirmNotSaveChange": "资料已异动且尚未保存，确定要取消此次异动吗?", - "equalPO": "同 PO", - "equalDateCode": "同 DateCode", - "differentPrdBatchNotOverN": "DateCode 不相同的生产批不超过(N)个", - "differenceNotOverWeekN": "DateCode 的差距不超过(N)周", - "equalUserLot": "同客户批号", - "differentUserLotNotOverN": "客户批号不相同的生产批不超过(N)个", - "equalTestingProgramRevision": "相同测试程式与版次", - "sameOrderCcstom": "相同工单自订", - "valid": "有效", - "EQURuleNo": "EQC规则编号", - "sampleRuleNo": "抽样规则编号", - "maxNumber": "最大几个", - "BINNo": "BIN编号", - "indicateBIN": "指定BIN", - "indicateCAT": "指定CAT", - "electricTestingRule": "电性抽测规则", - "confirmDelRuleNo": "是否确认删除{eqcRuleNo}", - "checkBIN": "请勾选BIN", - "sampleMethodMaxBINNotEmpty": "抽样方式为最大N个BIN时，最大几个不能为空", - "selectOneRow": "请先选择一行", - "allGoodCatNumber": "所有Good CAT数", - "indicateSingleCAT": "指定单一CAT", - "indicateMultipleCAT": "指定多个CAT", - "maximumSingleCAT": "最大一个CAT", - "maximumNCAT": "最大N个CAT", - "indicateRepleMultipleCAT": "指定多个CAT顺序补足", - "others": "其他", - "sampleType": "抽样类型", - "FTAutoSplitRule": "FT自动分批规则", - "splitRule": "分批规则", - "transferMethod": "转移方式", - "batchNo": "批号", - "keepOrigin": "沿用原始", - "prdNewNo": "产生新号", - "inputDirect": "直接输入", - "add": "加上", - "subtract": "减去", - "code": "码+", - "applyBIN": "套用BIN", - "applyCAT": "套用CAT", - "selectRouterNo": "请先选择途程编号", - "FTSplichRule": "FT分批规则", - "confirmDelItemSeq": "是否确认删除项次为{seq}", - "transferMethod2": "移转方式", - "itemNoChangeLogicNewNotEmpty": "产品编号变更逻辑为产生新号，料件编号不可为空", - "userPartChangeLogic": "客户料号变更逻辑为产生新号，客户料号不可为空", - "userLotChangeLogic": "客户批号变更逻辑为产生新号，请选择变更方式", - "inputFieldsNotEmpty": "直接输入输入值栏位不可为空", - "addingFieldNotEmpty": "加入输入值栏位不可为空", - "haltCodeOrInputFieldsNotEmpty": "保留码数或输入值栏位不可为空", - "haltCodePositiveInt": "保留码数必需为正整数", - "subtractCodeOrInputNotEmpty": "减去码数或输入值栏位不可为空", - "subtractCodePositiveInt": "减去码数必需为正整数", - "itemNoPositiveInt": "项次必需为正整数", - "leastCheckOneBIN": "至少勾选一个BIN", - "itemNotDuplicate": "项次不可重複", - "productCodeNotEmpty": "产品编号不能为空", - "splitNoRule": "分批编号规则", - "singleTest": "单次测试数", - "singleTestSecond": "单次测试秒数", - "singleTestPositiveInt": "单次测试数数应为正整数", - "ruleSingleTestSecond": "单次测试秒仅可输入大于0的数值，小数点允许2位", - "seqBINNoNotEmpty": "序号{seq}，BIN编号不可为空", - "seqResultNotEmpty": "序号{seq}，结果不可为空", - "CPTestProgram": "CP测试程式", - "FTTestProgram": "FT测试程式", - "insertNewItem": "插入新项", - "removeAll": "移除全部", - "fieldLabel": "栏位标籤", - "mandatory": "必须", - "enterCategory": "请输入类别", - "cannotRemoveDisabledRow": "不能移除已禁用行", - "noItemsToRemove": "没有要移除的项", - "confirmDeleteCustomData": "是否确认删除自订资料 {tableName}", - "numberType": "编号类型", - "orderType": "订单类型", - "definitionMethod": "定义方式", - "defineByContainer": "按容器定义", - "skipSequence": "跳过序列", - "prefix": "首码", - "suffix": "尾码", - "baseNumber": "基数", - "sequenceLength": "序列长度", - "maximumSequence": "最大序列", - "minimumSequence": "最小序列", - "increment": "增量", - "currentSequence": "当前序列", - "resetSequenceNumber": "重置序号", - "commitImmediately": "立即提交", - "numberingRuleExample": "编号规则示例", - "enterOrSelectNumberType": "请输入或选择编号类型", - "enterBaseNumber": "请输入基数", - "maxLength128Characters": "最大长度为128字元", - "enterCurrentSequence": "请输入当前序列", - "materialGroup": "物料组", - "noData": "没有资料", - "searchBeforeDeleting": "请先检索之后再删除", - "never": "从不", - "always": "总是", - "daily": "每天", - "weekly": "每週", - "monthly": "每月", - "yearly": "每年", - "weeklySunday": "每週 - 星期日", - "weeklyMonday": "每週 - 星期一", - "weeklyTuesday": "每週 - 星期二", - "weeklyWednesday": "每週 - 星期三", - "weeklyThursday": "每週 - 星期四", - "weeklyFriday": "每週 - 星期五", - "weeklySaturday": "每週 - 星期六", - "carrierTypeDesc": "载具类型说明", - "enterCarrierType": "请输入载具类型", - "enterCarrier": "请输入载具编号", - "layoutColumns": "栏数", - "layoutRows": "列数", - "layoutCapacity": "最大容量", - "layoutMapping": "载具位置图", - "layoutType": "载具位置类型", - "containerType0": "不需要位置", - "containerType1": "单栏排列", - "containerType2": "矩阵排列", - "mappingNo": "位置编码", - "carrierTypeExist": "载具类型: {carrierType}已存在", - "carrierExist": "载具编号: {carrier}已存在", - "confirmDelCarrierType": "是否确认删除载具类型: {carrierType}", - "confirmDelCarrier": "是否确认删除载具编号: {carrier}", - "carrierMemberActive": "载具作业", - "carrierBind": "绑定", - "carrierUnBind": "解绑", - "operationType2": "操作类型", - "carrierNumber": "载具数量", - "carrierTypeBo": "载具类型BO", - "status1": "使用中", - "status2": "闲置", - "automaticGeneration": "自动生成", - "lotNo": "Lot No", - "currentLoadQty": "当前装载数量", - "positionLabel": "位置标签", - "position": "位置", - "batchCreation": "批量创建", - "confirmDelWorkGroupNo": "是否确认删除该班组编号：{workGroup}", - "startLineInspectionNumber": "开线检编号", - "lineInspectionConfiguration": "开线检配置", - "addLineInspectionConfiguration": "开线检配置-新增", - "viewLineInspectionConfiguration": "开线检配置-查看", - "editLineInspectionConfiguration": "开线检配置-编辑", - "checkItem": "检查项目", - "processOrProductionLine": "工序/产线", - "availableProductionLines": "可用产线", - "assignedProductionLines": "已指派产线", - "customData": "自定资料", - "deactivate": "停用", - "confirmDeletionOfLineInspectionId": "是否确认删除开线检编号 {id}", - "keyCannotBeEmpty": "{key}不能为空", - "processStep": "工步", - "selectProcessStepToDelete": "请选择要删除的工步", - "action": "动作", - "feeding": "投料", - "issueCommand": "下指令", - "systemIntegration": "系统对接", - "feedingOpen": "投料开启", - "issueCommandWaitForResponseOpen": "下指令 - 等待回应", - "issueCommandNoWaitForResponseOpen": "下指令 - 不等回应", - "alarmOpen": "Alarm 开启", - "systemIntegrationOpen": "系统对接开启", - "actionContent": "动作内容", - "processStepFeedingContent": "工步-投料内容", - "processStepIssueCommandContent": "工步-下指令内容", - "processStepAlarmContent": "工步-Alarm内容", - "processStepSystemIntegrationContent": "工步-系统对接内容", - "processStepParameters": "工步-参数", - "systemName": "系统名称", - "materialCannotBeEmpty": "物料不可为空", - "standardNumberCannotBeEmpty": "标准数不可为空", - "unitQuantityCannotBeEmpty": "单位量不可为空", - "commandIDCannotBeEmpty": "commandID 不可为空", - "eventIDCannotBeEmpty": "Event ID 不可为空", - "systemNameCannotBeEmpty": "系统名称不可为空", - "messageIDCannotBeEmpty": "Message ID 不可为空", - "processStepListCannotBeEmpty": "工步清单不可为空", - "enterProcessStep": "请输入工步", - "selectAction": "请选择动作", - "enterProcessStepActionContent": "请输入工步 {step} 动作 {action} 的动作内容", - "parameterLimitsCannotBeEmpty": "序号 {seq} 参数编号「{parameterNo}」的规格上下限不可为空", - "parameterDoesNotMeetLimits": "序号 {seq} 参数编号「{parameterNo}」不符合规格上限 > 规格下限", - "parameterValueCannotBeEmpty": "序号 {seq} 参数编号「{parameterNo}」的参数值不可为空", - "confirmDeletionOfSelectedRows": "是否确认删除选中的行", - "unbindAllConfirm": "确定解除所有绑定？", - "enterRecipeNumber": "请输入Recipe编号", - "enterVersion": "请输入版本", - "selectType2": "请选择类型", - "enterStandardNumber": "请输入标准数", - "numericInputOnly": "只能输入数值", - "standardNumberMustBeGreaterThanZero": "标准数必须大于零", - "stadQuantityAllowsUpToSixDecimals": "标准数最多允许六位小数", - "enterUnitQuantity": "请输入单位量", - "unitQuantityMustBeGreaterThanZero": "单位量必须大于零", - "unitQuantityAllowsUpToSixDecimals": "单位量最多允许六位小数", - "parameterNumberDuplicated": "参数编号 {parameterNo} 在序号 {duplicatedSeqs} 中重複设定", - "typeNoDuplicated": "设备类别 {typeNo} 在序号 {seq} 中重複设定", - "parameterNumberCannotBeEmpty": "参数编号不可为空", - "specLimitsCannotBeEmpty": "配方页籤，顺序 {seq} Recipe编号 {recipeNo} 的参数编号 {parameterNo} 规格上下限不可为空", - "typeNoParameterValueCannotBeEmpty": "配方页籤，顺序 {seq} Recipe编号 {recipeNo} 的参数编号 {parameterNo} 参数值不可为空", - "carrierPositionDuplicate": "载具位置{No}不可重複", - "workCenterNumber": "工作中心编号", - "mixingLinesAllowed": "是否可混线", - "workCenterCannotBeEmpty": "序号 {seq} 产线编号不可为空", - "workCenterCannotBeDuplicated": "产线编号 {workCenter} 不可重復", - "targetSourceMaterialVersionCannotBeSame": "目标料件编号/版本不可与来源料件编号/版本相同", - "resrceStatus": "设备状态", - "toolStatus": "工具状态", - "rework": "重工", - "subProcess": "子流程", - "tempProcess": "临时流程", - "prd": "製造", - "purchase": "采购", - "overZero": "须大于0", - "carrierSaveSuccessAndPrint": "载具新增成功，是否打印标籤?", - "capacityNotEnough": "载具『{carrier}』容量不足，无法装载", - "positionNotEnough": "载具『{carrier}』位置不足，无法装载", - "overSingleSelected": "请选择一个装载位置", - "positionLotLoaded": "载具位置『{position}』已有摆放LOT，请先移除LOT", - "selectLotDelete": "请先选择要删除的LOT", - "confirmRemoveAll": "是否清空载具上的所有LOT", - "confirmCancel": "是否取消此次变更", - "inputLotNo": "请输入Lot No", - "virtualItem": "虚拟料件编号", - "virtualItemRepeat": "料件明细已有此虚拟料件编号「{item}」，不可重复配置", - "virtualItemExist": "当前物料清单中不存在虚拟料件编号「{item}」", - "virtualItemBind": "虚拟料件「{item}」已被其他料件绑定，不允许删除", - "router": { - "error1": "工艺路线已在使用中，无法删除链接", - "error2": "不能连接自己", - "error3": "不能重复连线", - "error4": "不能回环", - "error5": "工艺路线已在使用中，无法新增节点", - "error6": "请把节点拖入到画布中", - "error7": "开始节点不能重复添加", - "error8": "结束节点不能重复添加", - "error9": "工艺路线已在使用中，无法删除节点", - "error10": "必须有一个开始节点", - "error11": "必须有一个结束节点", - "error12": "途程节点【{node}】步骤不能为空", - "error13": "节点【{node}】步骤【{step}】不可重复", - "error14": "途程节点连接不能为空", - "error15": "途程类型为『维修』，途程上仅可有一个维修工序", - "confirm1": "确定删除所点击的线吗?", - "confirm2": "确定要删除节点[{node}]?", - "success1": "连线成功" - }, - "sequenceDeviceCategoryPdcParameterValueNotMaintained": "PDC参数值未维护，不允许保存", - "startNode": "开始节点", - "otherSteps": "其它步骤", - "reworkProcess": "重工流程", - "nodeInformation": "节点信息", - "erpSteps": "ERP步骤", - "connectionInformation": "连线信息", - "script": "脚本", - "processDataInformation": "流程数据信息", - "processRouteInformation": "工艺路线信息", - "reservedIdentifier": "保留标识", - "processRouteType": "工艺路线类型", - "enterProcessRoute": "请输入工艺路线", - "selectProcessRouteType": "请选择工艺路线类型", - "returnToOriginalState": "返回（原始状态）", - "returnToAny": "返回（任意）", - "returnToPrevious": "返回（上一个）", - "returnToAnyPrevious": "返回（任意上一个）", - "returnToNext": "返回（下一个）" -} \ No newline at end of file + "BOMNo": "BOM编号", + "currentRevision": "目前版本", + "unitConsume": "单位耗用量", + "unitPrdAmount": "单位生产数", + "confirmDelItemList": "是否确认删除物料清单{bom}/{bomType}/{revision}", + "itemOperationDuplicate": "料件编号:{component} 投料点:{operation}重複", + "BOMMaintainItemDetail": "BOM必须维护料件明细", + "item": "料件", + "itemTypeDesc": "料件类别说明", + "selectWorkGroup": "请选择班组", + "selectUserWorkShiftNo": "请选择班製编号", + "nextMonth": "下月份", + "nextYear": "下年度", + "cannotModifyPastCalendars": "不可修改当日(包含当日)之前的班组日历", + "confirmCoverageWorkGroupCalendarInfo": "当前班组在{rangeText}已经有设定值，是否进行复盖", + "userWorkShift": "班製", + "userWorkShiftNo": "班製编号", + "userWorkShiftDesc": "班製说明", + "userWorkShiftNoExist": "班製编号: {userWorkShift}已存在", + "confirmDelUserWorkShift": "是否确认删除班製: {userWorkShift}", + "workPosition": "职级", + "workGroup": "班组编号", + "workGroupDesc": "班组说明", + "workGroupUser": "班组人员", + "workGroupType": "班组类型", + "workGroupTypeNo": "班组类型编号", + "workGroupTypeDesc": "班组类型说明", + "enterWorkGroupTypeNo": "请输入班组类型编号", + "confirmDelWorkGroupType": "是否确认删除班组类型: {workGroupType}", + "shippingLocation": "出货地点", + "shippingPlace": "出货地", + "country": "国家", + "address": "地址", + "user": "客户", + "userNoRequired": "客户编号不可为空", + "userNoExist": "客户编号: {customerNo}已存在", + "confirmDelUser": "是否确认删除客户: {customerNo}", + "inspLevel": "检验等级", + "confirmSelectInspPlanDel": "请选择要删除的检验计划", + "confirmSelectSupplierDel": "请选择要删除的供应商", + "itemMaterialMaintain": "料件维护", + "inspLevelNotSetMultiple": "检验等级『{str}』不可设定多个检验计划", + "confirmDelItemMaterialNo": "是否确认删除料件编号: {item}", + "contactPerson": "联络人", + "itemTypeExist": "料件类别: {typeNo}已存在", + "confirmDelItemType": "是否确认删除料件类别: {typeNo}", + "actionTiming": "作用时机", + "ruleLogic": "法则逻辑", + "rule": "法则", + "dispose": "处置", + "variable": "变数", + "operator": "运算子", + "checkValue": "判断值", + "startOp": "开始工序", + "exitOpTime": "出站时间", + "endOp": "结束工序", + "messaeRouter": "讯息 / 路径", + "controlRuleConfig": "管制法则配置", + "ruleLogicSetting": "法则逻辑设定", + "confirmRuleNoDel": "法则编号{ruleNo},是否确认删除", + "confirmRuleDel": "法则{rule},是否确认删除", + "confirmInOrderDuplicate": "顺序{seq}重複, 请确认", + "startOpIndicateTime": "开始工序的指定时间", + "endOpIndicateTime": "结束工序的指定时间", + "msgNotEmpty": "讯息不可为空", + "alarmCodeNotEmpty": "报警编号不可为空", + "routerNotEmpty": "路径不可为空", + "startOpEndOpDataNotEqual": "开始工序与结束工序所设定的资料不可完全相同", + "segmentNo": "工段编号", + "eventNo": "事件编号", + "eventName": "事件名称", + "eventDesc": "事件说明", + "severity": "严重度", + "duty": "责任", + "nonConformingGroup": "不合格群组", + "usableNonConformingGroup": "可用不合格群组", + "indicatedNonConformingGroup": "已指派不合格群组", + "selfDuty": "自责", + "otherDuty": "他责", + "nonConformanceCodeExist": "不合格代码: {ncCode}已存在", + "confirmDelNonComformingCode": "是否确认删除不合格代码: {ncCode}", + "usableNonConformingCode": "可用不合格代码", + "indicatedNonConformingCode": "已指派不合格代码", + "operationConfig": "工序配置", + "nonConformanceGroupExist": "不合格群组: {ncGroup}已存在", + "confirmDelNCGroup": "是否确认删除不合格群组: {ncGroup}", + "operationType": "工序类型", + "usableResrce": "可用设备", + "indicatedResrce": "已指派设备", + "usableItemType": "可用料件类别", + "indicatedItemType": "已指派料件类别", + "operationDataField": "工序主资料", + "confirmDelOperation": "是否确认删除ID为{operation}", + "operationExist": "工序: {operation}已存在", + "paramType": "参数类型", + "default": "默认", + "dataType": "型别", + "dataListSrc": "资料表来源", + "textSrc": "栏位来源", + "textDescSrc": "栏位说明来源", + "otherRequirement": "其他条件", + "dataList": "资料表", + "paramDataFields": "参数主资料", + "confirmDelParamNo": "是否确认删除参数编号: {parameterNo}", + "paramNoExist": "参数编号: {parameterNo}已存在", + "PDCNo": "PDC编号", + "PDCDataFields": "PDC主资料", + "confirmDelPDCNo": "是否确认删除PDC编号: {pdcNo}", + "selectParamForDel": "请选择要删除的参数", + "approve": "批准", + "release": "解签", + "approved": "已核准", + "notApproved": "未核准", + "operationForSegment": "工段对应的工序", + "inputKeywordForFilter": "输入关键字进行过滤", + "infoConfigForOperation": "工序相关资讯配置", + "operationDesc": "作业说明", + "controlRule": "管制法则", + "mapOffset": "Map偏移量", + "paramValue": "参数值", + "controlRuleNo": "管制法则编号", + "resrceAndFormula": "设备类别『{typeNo}』及主配方『{testProgramNo}』", + "toolCategoryAndType": "工具大类『{categoryNo}』,工具类别『{typeNo}』", + "notSetDuplicate": "不可重複设定", + "selectLimitResrce": "挑选限制的设备", + "selectSpareFormula": "挑选备用配方", + "doSearchFirst": "请先执行检索", + "itemRevisionApproveNotDel": "『{item}』、『{revision}』已核准,不得删除工段或工序", + "segmentNoOrOperationNo": "必须选择工段编号或工序编号", + "confirmDelOperation2": "是否确认删除工序: {treeOperation}", + "itemRevisionNotApproveByOperationNotSet": "{item} 、{revision}未设定工序,不得批准", + "itemRevisionNotApproveByMsgNotSet": "{item} 、{revision}未设定主要讯息,不得批准", + "confirmApprovePrdConfig": "是否核准『{item}』、『{revision}』的产品配置", + "approveSuccess": "核准成功", + "confirmDismissApproval": "是否确定对『{item}』、『{revision}』解除批准?", + "dismissSuccess": "解签成功", + "itemRevisionApprovedNotDel": "『{item}』、『{revision}』已核准,不得删除", + "confirmDelPrdConfig": "是否确认删除『{item}』、『{revision}』的产品配置", + "limitResrce": "限制设备", + "sourceMaterialNo": "来源料件编号", + "targetMaterialNo": "目标料件编号", + "targetRevision": "目标版本", + "targetExistApprovedNotCopy": "目标料件编号{newItem},版本{newRevision}已存在产品配置作业且状态为已核准,不可执行複製", + "confirmItemPrdParamConfigCover": "目标料件有配置产品生产参数,是否复盖?", + "copyComp": "複製完成", + "selectCategory": "请选择大类", + "selectType": "请选择类别", + "limitType": "限制类型", + "seqLimitedResrceNotEmpty": "序号{seq}的限制设备不可为空", + "formulaDesc": "配方说明", + "spareFormula": "备用配方", + "standardBatchAmount": "标准批量", + "orderSeq": "顺序「{el.seq}」", + "xYNotDuplicate": "X与Y不可重複", + "percent": "百分比", + "string": "字串", + "PDCDesc": "PDC说明", + "specCenter": "规格中心", + "prdConfigPDCParam": "产品配置作业-PDC参数", + "PDCPageSeqResrceNotEmpty": "PDC页签中，序号{seq}的设备类别不可为空", + "PDCPageSeqPDCNoNotEmpty": "PDC页签中，序号{seq}的PDC编号不可为空", + "PDCPageResrceTypeNotDuplicate": "PDC页签设备类别「{typeNo}」不可重複", + "paramNoMsg": "参数编号「{parameterNo}」", + "paramNoRule": "参数编号「{parameterNo}」不符合规格上限>规格下限", + "specificationCannotBeEmpty": "规格不可为空", + "RecipeNo": "Recipe编号", + "RecipeDesc": "Recipe说明", + "RecipeReversion": "Recipe版本", + "prdConfigRecipeParam": "产品配置作业-Recipe参数", + "pageRECIPESeqResrceTypeNotEmpty": "配方页签中，序号{seq}的设备类别不可为空", + "pageRECIPESeqRecipeNoNotEmpty": "配方页签中，序号{seq}的Recipe编号不可为空", + "pageRECIPESeqRecipeNoParamNotEmpty": "配方页签中，序号{seq}的Recipe编号的参数值不可为空", + "pageRECIPESeqRecipeNoHighLimitNotEmpty": "配方页签中，序号{seq}的Recipe编号的规格上限不可为空", + "pageRECIPESeqRecipeNoLowLimitNotEmpty": "配方页签中，序号{seq}的Recipe编号的规格下限不可为空", + "pageRECIPESeqRecipeNoSpecCenterNotEmpty": "配方页签中，序号{seq}的Recipe编号的规格中心不可为空", + "pageRECIPEResrceTypeNotDupilcate": "配方页签中设备类别「{typeNo}」不可重複", + "confirmDelReasonCode": "是否确认删除原因代码： {reasonCode}", + "paramNoDesc": "参数编号说明", + "selectParamNoForDel": "请选择要删除的参数编号", + "RecipeDataConfig": "Recipe主资料配置", + "RecipeDataFields": "Recipe主资料", + "paramItemNotEmpty": "参数清单不可为空", + "confirmDelRecipeNo": "是否确认删除Recipe编号: {recipeNo}", + "copySuccess": "複製成功", + "confirmSegmentChangedDelRouter": "工段已变更，已绘製的途程将删除，是否确定？", + "confirmDelRouter": "是否确认删除途程: {router}/{revision}", + "segmentDataFields": "工段主资料", + "orderShouldPositiveInt": "顺序应为正整数", + "segmentExist": "工段: {segmentNo}已存在", + "confirmDelSegment": "是否确认删除工段: {segmentNo}", + "confirmDelSupplierNo": "是否确定删除供应商编号{supplierNo}", + "phone": "电话", + "routerDraw": "途程-绘製", + "batchRule": "併批规则", + "specialUserBatchNo": "特批客户批号", + "setter": "设定人", + "batchRuleOrderCustom": "併批规则-工单自订", + "selectDelRow": "请先选择要删除的行", + "confirmSeqRemove": "序号{selectedSeqs}，确定要移除该笔资料吗?", + "seqInputSettingValueNRequired": "序号{missingValues}必须输入设定值(N)", + "uncheckCustomDataField": "未勾选相同工单自订的资料栏位", + "seqUserBatchNotEmpty": "序号{emptyLots}的客户批号不可为空", + "seqUserLotDuplicate": "序号{duplicateSeq}，客户批号重複", + "confirmNotSaveChange": "资料已异动且尚未保存，确定要取消此次异动吗?", + "equalPO": "同 PO", + "equalDateCode": "同 DateCode", + "differentPrdBatchNotOverN": "DateCode 不相同的生产批不超过(N)个", + "differenceNotOverWeekN": "DateCode 的差距不超过(N)周", + "equalUserLot": "同客户批号", + "differentUserLotNotOverN": "客户批号不相同的生产批不超过(N)个", + "equalTestingProgramRevision": "相同测试程式与版次", + "sameOrderCcstom": "相同工单自订", + "valid": "有效", + "EQURuleNo": "EQC规则编号", + "sampleRuleNo": "抽样规则编号", + "maxNumber": "最大几个", + "BINNo": "BIN编号", + "indicateBIN": "指定BIN", + "indicateCAT": "指定CAT", + "electricTestingRule": "电性抽测规则", + "confirmDelRuleNo": "是否确认删除{eqcRuleNo}", + "checkBIN": "请勾选BIN", + "sampleMethodMaxBINNotEmpty": "抽样方式为最大N个BIN时，最大几个不能为空", + "selectOneRow": "请先选择一行", + "allGoodCatNumber": "所有Good CAT数", + "indicateSingleCAT": "指定单一CAT", + "indicateMultipleCAT": "指定多个CAT", + "maximumSingleCAT": "最大一个CAT", + "maximumNCAT": "最大N个CAT", + "indicateRepleMultipleCAT": "指定多个CAT顺序补足", + "others": "其他", + "sampleType": "抽样类型", + "FTAutoSplitRule": "FT自动分批规则", + "splitRule": "分批规则", + "transferMethod": "转移方式", + "batchNo": "批号", + "keepOrigin": "沿用原始", + "prdNewNo": "产生新号", + "inputDirect": "直接输入", + "add": "加上", + "subtract": "减去", + "code": "码+", + "applyBIN": "套用BIN", + "applyCAT": "套用CAT", + "selectRouterNo": "请先选择途程编号", + "FTSplichRule": "FT分批规则", + "confirmDelItemSeq": "是否确认删除项次为{seq}", + "transferMethod2": "移转方式", + "itemNoChangeLogicNewNotEmpty": "产品编号变更逻辑为产生新号，料件编号不可为空", + "userPartChangeLogic": "客户料号变更逻辑为产生新号，客户料号不可为空", + "userLotChangeLogic": "客户批号变更逻辑为产生新号，请选择变更方式", + "inputFieldsNotEmpty": "直接输入输入值栏位不可为空", + "addingFieldNotEmpty": "加入输入值栏位不可为空", + "haltCodeOrInputFieldsNotEmpty": "保留码数或输入值栏位不可为空", + "haltCodePositiveInt": "保留码数必需为正整数", + "subtractCodeOrInputNotEmpty": "减去码数或输入值栏位不可为空", + "subtractCodePositiveInt": "减去码数必需为正整数", + "itemNoPositiveInt": "项次必需为正整数", + "leastCheckOneBIN": "至少勾选一个BIN", + "itemNotDuplicate": "项次不可重複", + "productCodeNotEmpty": "产品编号不能为空", + "splitNoRule": "分批编号规则", + "singleTest": "单次测试数", + "singleTestSecond": "单次测试秒数", + "singleTestPositiveInt": "单次测试数数应为正整数", + "ruleSingleTestSecond": "单次测试秒仅可输入大于0的数值，小数点允许2位", + "seqBINNoNotEmpty": "序号{seq}，BIN编号不可为空", + "seqResultNotEmpty": "序号{seq}，结果不可为空", + "CPTestProgram": "CP测试程式", + "FTTestProgram": "FT测试程式", + "insertNewItem": "插入新项", + "removeAll": "移除全部", + "fieldLabel": "栏位标籤", + "mandatory": "必须", + "enterCategory": "请输入类别", + "cannotRemoveDisabledRow": "不能移除已禁用行", + "noItemsToRemove": "没有要移除的项", + "confirmDeleteCustomData": "是否确认删除自订资料 {tableName}", + "numberType": "编号类型", + "orderType": "订单类型", + "definitionMethod": "定义方式", + "defineByContainer": "按容器定义", + "skipSequence": "跳过序列", + "prefix": "首码", + "suffix": "尾码", + "baseNumber": "基数", + "sequenceLength": "序列长度", + "maximumSequence": "最大序列", + "minimumSequence": "最小序列", + "increment": "增量", + "currentSequence": "当前序列", + "resetSequenceNumber": "重置序号", + "commitImmediately": "立即提交", + "numberingRuleExample": "编号规则示例", + "enterOrSelectNumberType": "请输入或选择编号类型", + "enterBaseNumber": "请输入基数", + "maxLength128Characters": "最大长度为128字元", + "enterCurrentSequence": "请输入当前序列", + "materialGroup": "物料组", + "noData": "没有资料", + "searchBeforeDeleting": "请先检索之后再删除", + "never": "从不", + "always": "总是", + "daily": "每天", + "weekly": "每週", + "monthly": "每月", + "yearly": "每年", + "weeklySunday": "每週 - 星期日", + "weeklyMonday": "每週 - 星期一", + "weeklyTuesday": "每週 - 星期二", + "weeklyWednesday": "每週 - 星期三", + "weeklyThursday": "每週 - 星期四", + "weeklyFriday": "每週 - 星期五", + "weeklySaturday": "每週 - 星期六", + "carrierTypeDesc": "载具类型说明", + "enterCarrierType": "请输入载具类型", + "enterCarrier": "请输入载具编号", + "layoutColumns": "栏数", + "layoutRows": "列数", + "layoutCapacity": "最大容量", + "layoutMapping": "载具位置图", + "layoutType": "载具位置类型", + "containerType0": "不需要位置", + "containerType1": "单栏排列", + "containerType2": "矩阵排列", + "mappingNo": "位置编码", + "carrierTypeExist": "载具类型: {carrierType}已存在", + "carrierExist": "载具编号: {carrier}已存在", + "confirmDelCarrierType": "是否确认删除载具类型: {carrierType}", + "confirmDelCarrier": "是否确认删除载具编号: {carrier}", + "carrierMemberActive": "载具作业", + "carrierBind": "绑定", + "carrierUnBind": "解绑", + "operationType2": "操作类型", + "carrierNumber": "载具数量", + "carrierTypeBo": "载具类型BO", + "status1": "使用中", + "status2": "闲置", + "automaticGeneration": "自动生成", + "lotNo": "Lot No", + "currentLoadQty": "当前装载数量", + "positionLabel": "位置标签", + "position": "位置", + "batchCreation": "批量创建", + "confirmDelWorkGroupNo": "是否确认删除该班组编号：{workGroup}", + "startLineInspectionNumber": "开线检编号", + "lineInspectionConfiguration": "开线检配置", + "addLineInspectionConfiguration": "开线检配置-新增", + "viewLineInspectionConfiguration": "开线检配置-查看", + "editLineInspectionConfiguration": "开线检配置-编辑", + "checkItem": "检查项目", + "processOrProductionLine": "工序/产线", + "availableProductionLines": "可用产线", + "assignedProductionLines": "已指派产线", + "customData": "自定资料", + "deactivate": "停用", + "confirmDeletionOfLineInspectionId": "是否确认删除开线检编号 {id}", + "keyCannotBeEmpty": "{key}不能为空", + "processStep": "工步", + "selectProcessStepToDelete": "请选择要删除的工步", + "action": "动作", + "feeding": "投料", + "issueCommand": "下指令", + "systemIntegration": "系统对接", + "feedingOpen": "投料开启", + "issueCommandWaitForResponseOpen": "下指令 - 等待回应", + "issueCommandNoWaitForResponseOpen": "下指令 - 不等回应", + "alarmOpen": "Alarm 开启", + "systemIntegrationOpen": "系统对接开启", + "actionContent": "动作内容", + "processStepFeedingContent": "工步-投料内容", + "processStepIssueCommandContent": "工步-下指令内容", + "processStepAlarmContent": "工步-Alarm内容", + "processStepSystemIntegrationContent": "工步-系统对接内容", + "processStepParameters": "工步-参数", + "systemName": "系统名称", + "materialCannotBeEmpty": "物料不可为空", + "standardNumberCannotBeEmpty": "标准数不可为空", + "unitQuantityCannotBeEmpty": "单位量不可为空", + "commandIDCannotBeEmpty": "commandID 不可为空", + "eventIDCannotBeEmpty": "Event ID 不可为空", + "systemNameCannotBeEmpty": "系统名称不可为空", + "messageIDCannotBeEmpty": "Message ID 不可为空", + "processStepListCannotBeEmpty": "工步清单不可为空", + "enterProcessStep": "请输入工步", + "selectAction": "请选择动作", + "enterProcessStepActionContent": "请输入工步 {step} 动作 {action} 的动作内容", + "parameterLimitsCannotBeEmpty": "序号 {seq} 参数编号「{parameterNo}」的规格上下限不可为空", + "parameterDoesNotMeetLimits": "序号 {seq} 参数编号「{parameterNo}」不符合规格上限 > 规格下限", + "parameterValueCannotBeEmpty": "序号 {seq} 参数编号「{parameterNo}」的参数值不可为空", + "confirmDeletionOfSelectedRows": "是否确认删除选中的行", + "unbindAllConfirm": "确定解除所有绑定？", + "enterRecipeNumber": "请输入Recipe编号", + "enterVersion": "请输入版本", + "selectType2": "请选择类型", + "enterStandardNumber": "请输入标准数", + "numericInputOnly": "只能输入数值", + "standardNumberMustBeGreaterThanZero": "标准数必须大于零", + "stadQuantityAllowsUpToSixDecimals": "标准数最多允许六位小数", + "enterUnitQuantity": "请输入单位量", + "unitQuantityMustBeGreaterThanZero": "单位量必须大于零", + "unitQuantityAllowsUpToSixDecimals": "单位量最多允许六位小数", + "parameterNumberDuplicated": "参数编号 {parameterNo} 在序号 {duplicatedSeqs} 中重複设定", + "typeNoDuplicated": "设备类别 {typeNo} 在序号 {seq} 中重複设定", + "parameterNumberCannotBeEmpty": "参数编号不可为空", + "specLimitsCannotBeEmpty": "配方页籤，顺序 {seq} Recipe编号 {recipeNo} 的参数编号 {parameterNo} 规格上下限不可为空", + "typeNoParameterValueCannotBeEmpty": "配方页籤，顺序 {seq} Recipe编号 {recipeNo} 的参数编号 {parameterNo} 参数值不可为空", + "carrierPositionDuplicate": "载具位置{No}不可重複", + "workCenterNumber": "工作中心编号", + "mixingLinesAllowed": "是否可混线", + "workCenterCannotBeEmpty": "序号 {seq} 产线编号不可为空", + "workCenterCannotBeDuplicated": "产线编号 {workCenter} 不可重復", + "targetSourceMaterialVersionCannotBeSame": "目标料件编号/版本不可与来源料件编号/版本相同", + "resrceStatus": "设备状态", + "toolStatus": "工具状态", + "rework": "重工", + "subProcess": "子流程", + "tempProcess": "临时流程", + "prd": "製造", + "purchase": "采购", + "overZero": "须大于0", + "carrierSaveSuccessAndPrint": "载具新增成功，是否打印标籤?", + "capacityNotEnough": "载具『{carrier}』容量不足，无法装载", + "positionNotEnough": "载具『{carrier}』位置不足，无法装载", + "overSingleSelected": "请选择一个装载位置", + "positionLotLoaded": "载具位置『{position}』已有摆放LOT，请先移除LOT", + "selectLotDelete": "请先选择要删除的LOT", + "confirmRemoveAll": "是否清空载具上的所有LOT", + "confirmCancel": "是否取消此次变更", + "inputLotNo": "请输入Lot No", + "virtualItem": "虚拟料件编号", + "virtualItemRepeat": "料件明细已有此虚拟料件编号「{item}」，不可重复配置", + "virtualItemExist": "当前物料清单中不存在虚拟料件编号「{item}」", + "virtualItemBind": "虚拟料件「{item}」已被其他料件绑定，不允许删除", + "router": { + "error1": "工艺路线已在使用中，无法删除链接", + "error2": "不能连接自己", + "error3": "不能重复连线", + "error4": "不能回环", + "error5": "工艺路线已在使用中，无法新增节点", + "error6": "请把节点拖入到画布中", + "error7": "开始节点不能重复添加", + "error8": "结束节点不能重复添加", + "error9": "工艺路线已在使用中，无法删除节点", + "error10": "必须有一个开始节点", + "error11": "必须有一个结束节点", + "error12": "途程节点【{node}】步骤不能为空", + "error13": "节点【{node}】步骤【{step}】不可重复", + "error14": "途程节点连接不能为空", + "error15": "途程类型为『维修』，途程上仅可有一个维修工序", + "confirm1": "确定删除所点击的线吗?", + "confirm2": "确定要删除节点[{node}]?", + "success1": "连线成功" + }, + "sequenceDeviceCategoryPdcParameterValueNotMaintained": "PDC参数值未维护，不允许保存", + "startNode": "开始节点", + "otherSteps": "其它步骤", + "reworkProcess": "重工流程", + "nodeInformation": "节点信息", + "erpSteps": "ERP步骤", + "connectionInformation": "连线信息", + "script": "脚本", + "processDataInformation": "流程数据信息", + "processRouteInformation": "工艺路线信息", + "reservedIdentifier": "保留标识", + "processRouteType": "工艺路线类型", + "enterProcessRoute": "请输入工艺路线", + "selectProcessRouteType": "请选择工艺路线类型", + "returnToOriginalState": "返回（原始状态）", + "returnToAny": "返回（任意）", + "returnToPrevious": "返回（上一个）", + "returnToAnyPrevious": "返回（任意上一个）", + "returnToNext": "返回（下一个）" +} diff --git a/src/locale/i18n/zh_tw/tqm/qms.json b/src/locale/i18n/zh_tw/tqm/qms.json index 66b746f..00f433c 100755 --- a/src/locale/i18n/zh_tw/tqm/qms.json +++ b/src/locale/i18n/zh_tw/tqm/qms.json @@ -94,7 +94,7 @@ "specificationControlCannotBeEmpty": "规格控管不可为空", "sampleNumberCannotBeEmpty": "样本数不可为空", "operationSuccessful": "{showTitle} 成功", - "confirmDeleteInspectionPlan": "是否确定删除检验计画: {qcPlan}", + "confirmDeleteInspectionPlan": "是否确定删除检验计划: {qcPlan}", "spcAnalysis": "SPC分析", "measurement": "计量", "inspectionItemCannotBeEmpty": "检验项目不可为空", @@ -138,7 +138,7 @@ "firstProductionBatchAfterHoursOfReactivation": "小时以上再启用第一个生产的程式批/SFC", "interval": "间隔", "hoursMachinePlusMaterial": "小时(机台+物料)", - "hoursMachinePlusInspectionPlan": "小时(机台+检验计画)", + "hoursMachinePlusInspectionPlan": "小时(机台+检验计划)", "every": "每", "perBatchOrSfc": "个程式批/SFC", "fixedTimeEveryDay": "每日固定几点", @@ -309,7 +309,7 @@ "confirm2": "确定要删除节点[{node}]?", "success1": "连线成功" }, - "qcTaskErrorList":{ + "qcTaskErrorList": { "error1": "請先選擇適配方案/流程", "error2": "適配方案/流程存在未選項", "error3": "項目分配不能為空",